Today's Message Index:
----------------------
1. 03:28 AM - Re: oil seal part number (Bryan Martin)
2. 05:12 AM - Re: oil seal part number (gary k)
3. 05:27 PM - Re: oil seal part number (Bryan Martin)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: oil seal part number |
--> Stratus-List message posted by: Bryan Martin <bryanmmartin@comcast.net>
The seal I got as a replacement for mine was made by Chicago Rawhide.
I don't have the part number handy but that's what the retailer cross
referenced it to. It's the same size as the National that it replaced
but the sealing lip is a bit deeper in the seal so it doesn't ride on
the same groove the old one made in the spacer so I had no problem
with that.
My plane is back in the air and it doesn't leak! Now I just have to
continue breaking in the rings and I'll be ready for Oshkosh.
On Jun 21, 2006, at 9:07 PM, gary k wrote:
>
> Mines weeping too, Auto Zone says it's a Felpro BS40387. no cross ref
> available. Spose I'll check NAPA tomorrow because I want to make
> sure I
> have the right part when I pull it.
>
> Sounds like I should try to get the aluminum spacer too.
>
> I may put the belt drive up for sale if anybody knows anyone that
> wants
> one.
>
> gary
>
>> --> Stratus-List message posted by: LarryMcFarland
>> <larry@macsmachine.com>
>>
>> Bryan,
>> The seal you need is the National 415021. I will forward an info
>> sheet
>> on these seals.
>>
>> Larry McFarland - 601HDS at www.macmachine.com
>>
>> Bryan Martin wrote:
>>
>>> Does anybody know the part number for the oil seal for the lower
>>> redrive bearing? I got my airplane back in the air today but it's
>>> leaking oil from the seal.
>
--
Bryan Martin
N61BM, CH 601 XL, Stratus Subaru.
do not archive.
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | oil seal part number |
--> Stratus-List message posted by: "gary k" <gkrysztopik@satx.rr.com>
Thanks Bryan.
With a little luck, I'll see you there. Do you park with
autoconversions, Zeniths or camping?
gary
-----Original Message-----
[mailto:owner-stratus-list-server@matronics.com] On Behalf Of Bryan
Martin
Sent: Thursday, June 22, 2006 5:28 AM
--> Stratus-List message posted by: Bryan Martin
<bryanmmartin@comcast.net>
The seal I got as a replacement for mine was made by Chicago Rawhide.
I don't have the part number handy but that's what the retailer cross
referenced it to. It's the same size as the National that it replaced
but the sealing lip is a bit deeper in the seal so it doesn't ride on
the same groove the old one made in the spacer so I had no problem
with that.
My plane is back in the air and it doesn't leak! Now I just have to
continue breaking in the rings and I'll be ready for Oshkosh.
On Jun 21, 2006, at 9:07 PM, gary k wrote:
>
> Mines weeping too, Auto Zone says it's a Felpro BS40387. no cross ref
> available. Spose I'll check NAPA tomorrow because I want to make
> sure I
> have the right part when I pull it.
>
> Sounds like I should try to get the aluminum spacer too.
>
> I may put the belt drive up for sale if anybody knows anyone that
> wants
> one.
>
> gary
>
>> --> Stratus-List message posted by: LarryMcFarland
>> <larry@macsmachine.com>
>>
>> Bryan,
>> The seal you need is the National 415021. I will forward an info
>> sheet
>> on these seals.
>>
>> Larry McFarland - 601HDS at www.macmachine.com
>>
>> Bryan Martin wrote:
>>
>>> Does anybody know the part number for the oil seal for the lower
>>> redrive bearing? I got my airplane back in the air today but it's
>>> leaking oil from the seal.
>
--
Bryan Martin
N61BM, CH 601 XL, Stratus Subaru.
do not archive.
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: oil seal part number |
--> Stratus-List message posted by: Bryan Martin <bryanmmartin@comcast.net>
Last year I parked my plane among four other Zodiacs in the homebuilt
area and set my tent up in the trees near the classics camping area
with a bunch of other members of my EAA chapter. I'll probably do the
same this year.
> --> Stratus-List message posted by: "gary k" <gkrysztopik@satx.rr.com>
>
> Thanks Bryan.
>
> With a little luck, I'll see you there. Do you park with
> autoconversions, Zeniths or camping?
>
> gary
>
> -----Original Message-----
> --> Stratus-List message posted by: Bryan Martin
> <bryanmmartin@comcast.net>
>
> The seal I got as a replacement for mine was made by Chicago Rawhide.
> ...
> My plane is back in the air and it doesn't leak! Now I just have to
> continue breaking in the rings and I'll be ready for Oshkosh.
>
>
--
Bryan Martin
N61BM, CH 601 XL, Stratus Subaru.
do not archive.
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|