---------------------------------------------------------- Stratus-List Digest Archive --- Total Messages Posted Thu 06/22/06: 3 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 03:28 AM - Re: oil seal part number (Bryan Martin) 2. 05:12 AM - Re: oil seal part number (gary k) 3. 05:27 PM - Re: oil seal part number (Bryan Martin) ________________________________ Message 1 _____________________________________ Time: 03:28:59 AM PST US From: Bryan Martin Subject: Re: Stratus-List: oil seal part number --> Stratus-List message posted by: Bryan Martin The seal I got as a replacement for mine was made by Chicago Rawhide. I don't have the part number handy but that's what the retailer cross referenced it to. It's the same size as the National that it replaced but the sealing lip is a bit deeper in the seal so it doesn't ride on the same groove the old one made in the spacer so I had no problem with that. My plane is back in the air and it doesn't leak! Now I just have to continue breaking in the rings and I'll be ready for Oshkosh. On Jun 21, 2006, at 9:07 PM, gary k wrote: > > Mines weeping too, Auto Zone says it's a Felpro BS40387. no cross ref > available. Spose I'll check NAPA tomorrow because I want to make > sure I > have the right part when I pull it. > > Sounds like I should try to get the aluminum spacer too. > > I may put the belt drive up for sale if anybody knows anyone that > wants > one. > > gary > >> --> Stratus-List message posted by: LarryMcFarland >> >> >> Bryan, >> The seal you need is the National 415021. I will forward an info >> sheet >> on these seals. >> >> Larry McFarland - 601HDS at www.macmachine.com >> >> Bryan Martin wrote: >> >>> Does anybody know the part number for the oil seal for the lower >>> redrive bearing? I got my airplane back in the air today but it's >>> leaking oil from the seal. > -- Bryan Martin N61BM, CH 601 XL, Stratus Subaru. do not archive. ________________________________ Message 2 _____________________________________ Time: 05:12:50 AM PST US From: "gary k" Subject: RE: Stratus-List: oil seal part number --> Stratus-List message posted by: "gary k" Thanks Bryan. With a little luck, I'll see you there. Do you park with autoconversions, Zeniths or camping? gary -----Original Message----- [mailto:owner-stratus-list-server@matronics.com] On Behalf Of Bryan Martin Sent: Thursday, June 22, 2006 5:28 AM --> Stratus-List message posted by: Bryan Martin The seal I got as a replacement for mine was made by Chicago Rawhide. I don't have the part number handy but that's what the retailer cross referenced it to. It's the same size as the National that it replaced but the sealing lip is a bit deeper in the seal so it doesn't ride on the same groove the old one made in the spacer so I had no problem with that. My plane is back in the air and it doesn't leak! Now I just have to continue breaking in the rings and I'll be ready for Oshkosh. On Jun 21, 2006, at 9:07 PM, gary k wrote: > > Mines weeping too, Auto Zone says it's a Felpro BS40387. no cross ref > available. Spose I'll check NAPA tomorrow because I want to make > sure I > have the right part when I pull it. > > Sounds like I should try to get the aluminum spacer too. > > I may put the belt drive up for sale if anybody knows anyone that > wants > one. > > gary > >> --> Stratus-List message posted by: LarryMcFarland >> >> >> Bryan, >> The seal you need is the National 415021. I will forward an info >> sheet >> on these seals. >> >> Larry McFarland - 601HDS at www.macmachine.com >> >> Bryan Martin wrote: >> >>> Does anybody know the part number for the oil seal for the lower >>> redrive bearing? I got my airplane back in the air today but it's >>> leaking oil from the seal. > -- Bryan Martin N61BM, CH 601 XL, Stratus Subaru. do not archive. ________________________________ Message 3 _____________________________________ Time: 05:27:44 PM PST US From: Bryan Martin Subject: Re: Stratus-List: oil seal part number --> Stratus-List message posted by: Bryan Martin Last year I parked my plane among four other Zodiacs in the homebuilt area and set my tent up in the trees near the classics camping area with a bunch of other members of my EAA chapter. I'll probably do the same this year. > --> Stratus-List message posted by: "gary k" > > Thanks Bryan. > > With a little luck, I'll see you there. Do you park with > autoconversions, Zeniths or camping? > > gary > > -----Original Message----- > --> Stratus-List message posted by: Bryan Martin > > > The seal I got as a replacement for mine was made by Chicago Rawhide. > ... > My plane is back in the air and it doesn't leak! Now I just have to > continue breaking in the rings and I'll be ready for Oshkosh. > > -- Bryan Martin N61BM, CH 601 XL, Stratus Subaru. do not archive.