---------------------------------------------------------- Stratus-List Digest Archive --- Total Messages Posted Sun 04/29/07: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:50 PM - Ignition Module Wiring - revisited (Hugh & Sherry MacKenzie) 2. 06:27 PM - Re: Ignition Module Wiring - revisited (LarryMcFarland) ________________________________ Message 1 _____________________________________ Time: 04:50:06 PM PST US From: "Hugh & Sherry MacKenzie" Subject: Stratus-List: Ignition Module Wiring - revisited I have finally decided to change my secondary ignition module to the TP45 from the Stratus supplied unit. I searched the archives here but did not find any definitive info on the coding of the three wires coming from the Stratus supplied flywheel pick-up. Here is what I found in the archives: Coil + goes to TP45 B terminal Coil - goes to TP45 C terminal Magnetic pick-up + (usually a red wire) goes to TP45 G Magnetic pick-up - (usually a white wire) goes to TP45 W The magnetic pick-up I have has three wires, Red, White and Black. The suggestions above from the archives did not work. Can some one using this Stratus supplied pick-up tell me which one is which? I assume the third wire is +12v. Thanks, Hugh Mackenzie CH601HDS ________________________________ Message 2 _____________________________________ Time: 06:27:56 PM PST US From: LarryMcFarland Subject: Re: Stratus-List: Ignition Module Wiring - revisited Hi Hugh, I looked at my ignition this evening and find three wires red black and green coming from the pickup to a plug connected with the solid state module that goes with the flywheel pickup. From it, two wires red and black come from the solid state box to my B coil, red to the black with white stripe coil wire and the black going to the blue coil wire. I'm not sure that you could use the TP45 in replacement of the solid state box provided by Stratus. Larry McFarland 601HDS at www.macsmachine.com Hugh & Sherry MacKenzie wrote: > > I have finally decided to change my secondary ignition module to the > TP45 from the Stratus supplied unit. I searched the archives here but > did not find any definitive info on the coding of the three wires > coming from the Stratus supplied flywheel pick-up. > > Here is what I found in the archives: > > Coil + goes to TP45 B terminal > > Coil goes to TP45 C terminal > > Magnetic pick-up + (usually a red wire) goes to TP45 G > > Magnetic pick-up (usually a white wire) goes to TP45 W > > The magnetic pick-up I have has three wires, Red, White and Black. The > suggestions above from the archives did not work. Can some one using > this Stratus supplied pick-up tell me which one is which? I assume the > third wire is +12v. > > Thanks, > > Hugh Mackenzie > > CH601HDS > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message stratus-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Stratus-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/stratus-list Browse Digests http://www.matronics.com/digest/stratus-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.