Today's Message Index:
----------------------
1. 01:22 PM - Re: Stratus PRSU belt (Larry McFarland)
2. 03:24 PM - Re: Re: Stratus PRSU belt (Ronbo135@aol.com)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Stratus PRSU belt |
Hi Ron,
I realized my original source is no more. With further investigation, I
found a company at polybelt.com called Polytech Design Inc and called them.
A gentleman named Zac confirmed availability for the Jason HTB 880-8M at
60mm width. This is a 110-tooth belt that has to
be bought as minimum order of 2 at $46.13 each. These belts are cut to
width originally, so don't be worried that their catalog doesn't mention the
60mm width. The price is reasonable considering original belts cost
nearer $65.00 each.
Their number is 1-800-859-7659
I'll probably order two to stay ahead of the game. I have one spare with
145 hours on it and it is kept in a large zip-lock bag for ozone protection.
That's needed for years of storage on edge on an unlit shelf. Industry
sees 6 years 24-7 usage at horsepower maximums before replacing, so 3-years
or 300 hours seems short if it weren't for planes stored outdoors in
extremes of weather.
Hope this works for you.
Best regards,
Larry McFarland
Ronbo135@aol.com wrote:
> Larry,
>
> I hope your heater project is working out.
>
> I'm trying to order a new PRSU belt and I can't find it using the info
> in the manual: Gates #7300. Do you have a better part number and a
> reputable place to get these?
>
> Thanks,
>
> Ron Hansen
> Oxnard, CA
> 601HDS, Stratus, BRS
> FAA inspection scheduled 2/4/10!
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Stratus PRSU belt |
Larry,
Thank you so much. Every question answered.
Take care,
Ron
In a message dated 1/27/2010 1:22:50 P.M. Pacific Standard Time,
larry@macsmachine.com writes:
--> Stratus-List message posted by: Larry McFarland
<larry@macsmachine.com>
Hi Ron,
I realized my original source is no more. With further investigation, I
found a company at polybelt.com called Polytech Design Inc and called them.
A gentleman named Zac confirmed availability for the Jason HTB 880-8M at
60mm width. This is a 110-tooth belt that has to
be bought as minimum order of 2 at $46.13 each. These belts are cut to
width originally, so don't be worried that their catalog doesn't mention
the
60mm width. The price is reasonable considering original belts cost
nearer $65.00 each.
Their number is 1-800-859-7659
I'll probably order two to stay ahead of the game. I have one spare with
145 hours on it and it is kept in a large zip-lock bag for ozone
protection.
That's needed for years of storage on edge on an unlit shelf. Industry
sees 6 years 24-7 usage at horsepower maximums before replacing, so 3-years
or 300 hours seems short if it weren't for planes stored outdoors in
extremes of weather.
Hope this works for you.
Best regards,
Larry McFarland
Ronbo135@aol.com wrote:
> Larry,
>
> I hope your heater project is working out.
>
> I'm trying to order a new PRSU belt and I can't find it using the info
> in the manual: Gates #7300. Do you have a better part number and a
> reputable place to get these?
>
> Thanks,
>
> Ron Hansen
> Oxnard, CA
> 601HDS, Stratus, BRS
> FAA inspection scheduled 2/4/10!
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|