Today's Message Index:
----------------------
1. 05:21 AM - egt readings (Don Walker)
2. 05:58 AM - Re: egt readings (gary)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
What are normal values for egt in the mid range...say 3500 rpm. I just inst
alled a dual egt...been running it without one all these years.=0A-=0AMy
idle egt readings are even with smooth running up to about 1700 rpm or so.
Then I'm getting rough running with my left bank showing about 900 and the
right up to 1250. This problem has just developed with about 450 hrs on the
- Bing carbs. Can't find any air leaks, but it occured to me I don't know
what normal is...could be the left is too cool.=0A-=0ACompression is eve
n all the way around.- don walker
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: egt readings |
Don, I still don't have EGT's yet but I have a spreadsheet with others
EA-81's (non-Stratus) and two reported 1350 and one 1325.
Have you pulled the carb boots to inspect? Tightened plugs? Checked
exhaust manifold nuts? Fuel filters?
Gary Krysztopik
San Antonio, TX
Don Walker wrote:
> What are normal values for egt in the mid range...say 3500 rpm. I just
> installed a dual egt...been running it without one all these years.
>
> My idle egt readings are even with smooth running up to about 1700 rpm
> or so. Then I'm getting rough running with my left bank showing about
> 900 and the right up to 1250. This problem has just developed with
> about 450 hrs on the Bing carbs. Can't find any air leaks, but it
> occured to me I don't know what normal is...could be the left is too cool.
>
> Compression is even all the way around. don walker
> *
>
>
> *
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|