Today's Message Index:
----------------------
1. 02:03 AM - Low RPM @ full throttle (jpkarnes@comcast.net)
2. 06:52 AM - Re: Low RPM @ full throttle (Larry McFarland)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Low RPM @ full throttle |
Hi all,
=C2-
After installing my Ram heads and dual dizzy's, I am only getting 3600 RPM
@ full throttle.=C2- The engine is running smooth with no hiccups, just o
nly getting 3600 RPM.=C2- The Bing carbs are the original setup with the
old heads and Subaru ignition.=C2- Any suggestions?=C2-
=C2-
Thanks,
=C2-
John K.
Zenith 601 HDS
Bremerton, WA
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Low RPM @ full throttle |
Hi John,
I=99d look at the butterfly travel and linkage at the carbs. If
you=99re running distributors, I=99d look at fly-weights in
the distributor. Check your carbs and jets for corruption from the
tank. I was surprised to have lots of aluminum swarf and grit from
construction of my tanks with same result. Smooth could be with
misadjusted valve gap and or timing. Get a good filter on your fuel
line ahead of the carbs. I used a see thru type, no problems.
Larry McFarland
From: owner-stratus-list-server@matronics.com
[mailto:owner-stratus-list-server@matronics.com] On Behalf Of
jpkarnes@comcast.net
Sent: Wednesday, October 02, 2013 4:04 AM
Subject: Stratus-List: Low RPM @ full throttle
Hi all,
After installing my Ram heads and dual dizzy's, I am only getting 3600
RPM @ full throttle. The engine is running smooth with no hiccups, just
only getting 3600 RPM. The Bing carbs are the original setup with the
old heads and Subaru ignition. Any suggestions?
Thanks,
John K.
Zenith 601 HDS
Bremerton, WA
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|