Today's Message Index:
----------------------
1. 05:33 PM - sheet metal (john)
2. 05:50 PM - Re: sheet metal (Jim and Donna Clement)
Message 1
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> Tailwind-List message posted by: "john" <frmrjohn@netonecom.net>
Had the airframe over to the sign shop the past couple of days sizing the
firewall, boot cowl, door panels and the framing for the baggage
compartment. Also did the aluminum for the top of the doors Clement style.
Received the material from Fred Felix today to get the prop carving in
motion. It is beginning to feel like there is some light at the end of the
tunnel. JohnD
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> Tailwind-List message posted by: "Jim and Donna Clement" <168x@merr.com>
Keep going John, I'll leave the light on. 03 is here. Jim
----- Original Message -----
From: "john" <frmrjohn@netonecom.net>
Subject: Tailwind-List: sheet metal
> --> Tailwind-List message posted by: "john" <frmrjohn@netonecom.net>
>
> Had the airframe over to the sign shop the past couple of days sizing the
> firewall, boot cowl, door panels and the framing for the baggage
> compartment. Also did the aluminum for the top of the doors Clement
style.
> Received the material from Fred Felix today to get the prop carving in
> motion. It is beginning to feel like there is some light at the end of
the
> tunnel. JohnD
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|