----------------------------------------------------------
                           Tailwind-List Digest Archive
                                      ---
                     Total Messages Posted Mon 01/13/03: 2
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 05:33 PM - sheet metal  (john)
     2. 05:50 PM - Re: sheet metal  (Jim and Donna Clement)
 
 
 
________________________________  Message 1  _____________________________________


Time: 05:33:55 PM PST US
From: "john" <frmrjohn@netonecom.net>
Subject: Tailwind-List: sheet metal

--> Tailwind-List message posted by: "john" <frmrjohn@netonecom.net>

Had the airframe over to the sign shop the past couple of days sizing the
firewall, boot cowl, door panels and the framing for the baggage
compartment.  Also did the aluminum for the top of the doors Clement style.
Received the material from Fred Felix today to get the prop carving in
motion.  It is beginning to feel like there is some light at the end of the
tunnel.  JohnD






________________________________  Message 2  _____________________________________


Time: 05:50:11 PM PST US
From: "Jim and Donna Clement" <168x@merr.com>
Subject: Re: Tailwind-List: sheet metal

--> Tailwind-List message posted by: "Jim and Donna Clement" <168x@merr.com>

Keep going John, I'll leave the light on. 03 is here. Jim


----- Original Message -----
From: "john" <frmrjohn@netonecom.net>
Subject: Tailwind-List: sheet metal


> --> Tailwind-List message posted by: "john" <frmrjohn@netonecom.net>
>
> Had the airframe over to the sign shop the past couple of days sizing the
> firewall, boot cowl, door panels and the framing for the baggage
> compartment.  Also did the aluminum for the top of the doors Clement
style.
> Received the material from Fred Felix today to get the prop carving in
> motion.  It is beginning to feel like there is some light at the end of
the
> tunnel.  JohnD
>
>