----------------------------------------------------------
                           Tailwind-List Digest Archive
                                      ---
                     Total Messages Posted Tue 01/28/03: 4
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 04:47 PM -   (john)
     2. 04:53 PM - brake master cyl.  (john)
     3. 04:54 PM - Re:   (Fred Weaver)
     4. 05:24 PM - Re: brake master cyl.  (Jim and Donna Clement)
 
 
 
________________________________  Message 1  _____________________________________


Time: 04:47:40 PM PST US
From: "john" <frmrjohn@netonecom.net>

--> Tailwind-List message posted by: "john" <frmrjohn@netonecom.net>

Jerry;  Another great Tailwind Times, it came today.  I got Heathers car
untotaled last week and will start on the engine (Mazda 13-B) installation
this week.  Finished forming the firewall today and hope to get the fuel
tank in tomorrow before I reinstall the firewall and engine mount.  I will
send you some more pictures as I progress, also some info on the the
progress.  JohnD






________________________________  Message 2  _____________________________________


Time: 04:53:38 PM PST US
From: "john" <frmrjohn@netonecom.net>
Subject: Tailwind-List: brake master cyl.

--> Tailwind-List message posted by: "john" <frmrjohn@netonecom.net>

Rick or Jim:  I noticed in the cabin pictures of your planes that you have
the tubing which goes to the wheel cylinders coming from the sides of the
master cylinders.  Did you weld up the mounting holes in the bottom of the
cylinders, or did you just cross drill and install.  The cylinders I have,
have the fitting holes on the rear side of the cylinders when mounted on the
bottom cross pin.  Thankyou.  JohnD






________________________________  Message 3  _____________________________________


Time: 04:54:05 PM PST US
Subject: Tailwind-List: Re: 
From: Fred Weaver <Mytyweav@flash.net>

--> Tailwind-List message posted by: Fred Weaver <Mytyweav@flash.net>

Time is blasting by Farmer John....  We want to have you flying with us  
this summer...   Hope you make it.
Weav
On Wednesday, January 29, 2003, at 04:55 PM, john wrote:

> --> Tailwind-List message posted by: "john" <frmrjohn@netonecom.net>
>
> Jerry;  Another great Tailwind Times, it came today.  I got Heathers  
> car
> untotaled last week and will start on the engine (Mazda 13-B)  
> installation
> this week.  Finished forming the firewall today and hope to get the  
> fuel
> tank in tomorrow before I reinstall the firewall and engine mount.  I  
> will
> send you some more pictures as I progress, also some info on the the
> progress.  JohnD
>
>
> _- 
> ======================================================================
> _- 
> ======================================================================
> _- 
> ======================================================================
> _- 
> ======================================================================
>
>






________________________________  Message 4  _____________________________________


Time: 05:24:17 PM PST US
From: "Jim and Donna Clement" <168x@merr.com>
Subject: Re: Tailwind-List: brake master cyl.

--> Tailwind-List message posted by: "Jim and Donna Clement" <168x@merr.com>

John, I use Matco MT-MC5  The mounting holes are cross drilled so they can
face any direction. Jim
----- Original Message -----
From: "john" <frmrjohn@netonecom.net>
Subject: Tailwind-List: brake master cyl.


> --> Tailwind-List message posted by: "john" <frmrjohn@netonecom.net>
>
> Rick or Jim:  I noticed in the cabin pictures of your planes that you have
> the tubing which goes to the wheel cylinders coming from the sides of the
> master cylinders.  Did you weld up the mounting holes in the bottom of the
> cylinders, or did you just cross drill and install.  The cylinders I have,
> have the fitting holes on the rear side of the cylinders when mounted on
the
> bottom cross pin.  Thankyou.  JohnD
>
>