Tailwind-List Digest Archive

Sat 02/08/03


Total Messages Posted: 8



Today's Message Index:
----------------------
 
     1. 03:13 PM - Re: Fuel Tank (john)
     2. 05:14 PM - Re: Fuel Tank (William Bernard)
     3. 05:14 PM - Re: Fuel Tank (William Bernard)
     4. 05:19 PM - Tailwind nose dragger parts (David Stroud)
     5. 05:58 PM - Re: Fuel Tank (Richard Lamb)
     6. 07:26 PM - Annual (Rick and Cindy)
     7. 08:52 PM - Am I playing with a full deck? (Christian Bobka)
     8. 11:50 PM - Re: Tailwind-List Digest: 2 Msgs - 02/07/03 (Larry H)
 
 
 


Message 1


  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 03:13:46 PM PST US
    From: "john" <frmrjohn@netonecom.net>
    Subject: Re: Fuel Tank
    --> Tailwind-List message posted by: "john" <frmrjohn@netonecom.net> Bill; Great going. My tank mathmatically is in that size. I'm hoping I don't need a lead tailwheel. Hope you filled it up before the price of gas went up the last .22 cents a gallon. JohnD ----- Original Message ----- From: "William Bernard" <billbernard@worldnet.att.net> Subject: Tailwind-List: Fuel Tank > --> Tailwind-List message posted by: "William Bernard" <billbernard@worldnet.att.net> > > I finally got the fuel tank to the point that I could measure the capacity. > > It holds 34 gallons! > > I just had to tell somebody > > Bill > >


    Message 2


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 05:14:14 PM PST US
    From: "William Bernard" <billbernard@worldnet.att.net>
    Subject: Re: Fuel Tank
    --> Tailwind-List message posted by: "William Bernard" <billbernard@worldnet.att.net> I hear ya, JohnD! Bill ----- Original Message ----- From: "john" <frmrjohn@netonecom.net> Subject: Re: Tailwind-List: Fuel Tank > --> Tailwind-List message posted by: "john" <frmrjohn@netonecom.net> > > Bill; Great going. My tank mathmatically is in that size. I'm hoping I > don't need a lead tailwheel. Hope you filled it up before the price of gas > went up the last .22 cents a gallon. JohnD > ----- Original Message ----- > From: "William Bernard" <billbernard@worldnet.att.net> > To: <tailwind-list@matronics.com>; <TailwindForum@yahoogroups.com> > Subject: Tailwind-List: Fuel Tank > > > > --> Tailwind-List message posted by: "William Bernard" > <billbernard@worldnet.att.net> > > > > I finally got the fuel tank to the point that I could measure the > capacity. > > > > It holds 34 gallons! > > > > I just had to tell somebody > > > > Bill > > > > > >


    Message 3


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 05:14:14 PM PST US
    From: "William Bernard" <billbernard@worldnet.att.net>
    Subject: Re: Fuel Tank
    --> Tailwind-List message posted by: "William Bernard" <billbernard@worldnet.att.net> Richard, I'm sorry that I don't have any electronic pictures to post. However the tank is 34.5 inches wide, 15 inches front to back and about 14 inches deep. It just barely fits, and now I have to figure out how to get everything else into the fuselage. The fun is only beginning. And yes, I know time is slipping by... Bill ----- Original Message ----- From: "Richard Lamb" <lamb01@flash.net> Subject: Re: Tailwind-List: Fuel Tank > --> Tailwind-List message posted by: Richard Lamb <lamb01@flash.net> > > Dimensions and Pix? > > Hurry up, Bill! > > > William Bernard wrote: > > > > --> Tailwind-List message posted by: "William Bernard" <billbernard@worldnet.att.net> > > > > I finally got the fuel tank to the point that I could measure the capacity. > > > > It holds 34 gallons! > > > > I just had to tell somebody > > > > Bill > > > >


    Message 4


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 05:19:20 PM PST US
    From: "David Stroud" <davestroud@rogers.com>
    Subject: Tailwind nose dragger parts
    --> Tailwind-List message posted by: "David Stroud" <davestroud@rogers.com> I visited a lady the other day who still has a few bits and pieces left from her late husband's estate here in town. He was collecting parts and things for a Tailwind. The wings got sold, but she still has an RV 6 nose wheel, a full castering item, with a new 5" wheel, tire and tube and she also has the RV6 landing gear leg to match. Does anyone know how much these things sell for new? If this is of interest to anyone, pls. contact me offline. She also has a new MC-10 nose bowl which I think is the preferred item for a Tailwind. She typically sells things for the ASS price but in Canadian bucks which roughly translates into a 33% saving but I think there's a bit more room to haggle. I think I saw a prop hub extension too..maybe about 4-6" long which may be required for that nose bowl. Dave Stroud L 16 B replica (Christavia) C-FDWS Ottawa, Canada


    Message 5


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 05:58:27 PM PST US
    From: Richard Lamb <lamb01@flash.net>
    Subject: Re: Fuel Tank
    --> Tailwind-List message posted by: Richard Lamb <lamb01@flash.net> Sounds like a really rectangular cross section. I've been trying to round the bottom, but capacity suffers. That extra two inches Jim puts up from makes a big difference.. --Richard William Bernard wrote: > > --> Tailwind-List message posted by: "William Bernard" <billbernard@worldnet.att.net> > > Richard, I'm sorry that I don't have any electronic pictures to post. > However the tank is 34.5 inches wide, 15 inches front to back and about 14 > inches deep. It just barely fits, and now I have to figure out how to get > everything else into the fuselage. The fun is only beginning. > > And yes, I know time is slipping by... > > Bill > ----- Original Message ----- > From: "Richard Lamb" <lamb01@flash.net> > To: <tailwind-list@matronics.com> > Subject: Re: Tailwind-List: Fuel Tank > > > --> Tailwind-List message posted by: Richard Lamb <lamb01@flash.net> > > > > Dimensions and Pix? > > > > Hurry up, Bill! > > > > > > William Bernard wrote: > > > > > > --> Tailwind-List message posted by: "William Bernard" > <billbernard@worldnet.att.net> > > > > > > I finally got the fuel tank to the point that I could measure the > capacity. > > > > > > It holds 34 gallons! > > > > > > I just had to tell somebody > > > > > > Bill > > > > > > > >


    Message 6


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 07:26:03 PM PST US
    From: Rick and Cindy <rcaviate@ne.infi.net>
    Subject: Annual
    --> Tailwind-List message posted by: Rick and Cindy <rcaviate@ne.infi.net> N393RC is getting her second annual, she has 193 tach hrs on her since 1-21-01. Hard to believe she's two years old and we've flown her that much, and I've enjoyed every single minute of it. We've had very little trouble with her, I guess the worst was a tiny leak in the fuel tank, the Tailwind basically being a fuel tank with an airplane built around it, it's a BITCH to get out. A minor crack in the landing gear mount is about the only other trouble worth mentioning. I hope your Tailwind is as good to you as 3RC has been to me, and I firmly believe that the best airplane people I've ever met are Tailwind people. If O-O is again as much fun as the TW has been, I don't know if I'll be able to stand it! Rick N393RC N241SW


    Message 7


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 08:52:17 PM PST US
    From: "Christian Bobka" <bobka@charter.net>
    Subject: Am I playing with a full deck?
    --> Tailwind-List message posted by: "Christian Bobka" <bobka@charter.net> Guys, I just picked up a set of plans from an old timer in the EAA chapter here and I have listed below the sheets that were all together for the W-8. Does this look like the full set? I feel it is missing something. Wittman Tailwind Model W-8 Construction Notes Booklet Wittman Model W-8 "Tailwind" Cutaway Cover Sheet with 16 pictures Cover sheet with 18 pictures 2-100 Specifications 2/28/54 2-102 Fuselage Framework 2/16/54 2-103 Full Size Rib - New Wing 2-104 Fuselage Cross Sections 2/23/54 2-105 Engine Mount 1/15/62 2-105-A Alternate Engine Mount 1/15/62 2-106 Tail Wheel Assemblies 4/4/67 2-106-R Rudder Control Revision 12/5/59 2-107 "Stick" Controls 3/14/54 2-108 Cabin Details 3/30/54 2-109 Wing Details 3/25/54 2-110 Right Door & Details 3/26/54 2-111 Flap Controls 3/31/54 2-112 Misc. Details 4/10/54 W-10 Supplement drawings. All these look like the W-8 drawings but say W-10 on them: 2-100A Specifications 2/28/54 2-101A Wing Details Sheet 1 of 2 12/2/76 2-102A Fuselage Frame Sheet 2 of 2 2/77 2-104A Fuselage Cross Sections 2/23/54 2-105-B Continental O-300 Engine Mount 1/2/76 2-106-A Tail Wheel Assemblies 4/4/67 2-107A "Stick" Controls 1/3/77 2-108A Cabin Details 3/30/54 2-109A Wing Details Sheet 2 of 2 12/21/76 2-111A Flap Controls 3/31/54 Chris Bobka


    Message 8


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 11:50:29 PM PST US
    From: "Larry H" <laheze@ev1.net>
    Subject: Re: Tailwind-List Digest: 2 Msgs - 02/07/03
    --> Tailwind-List message posted by: "Larry H" <laheze@ev1.net> Hey good for you, I guess that will get you somewhere!! I am glad for you even if no one else is! Larry Howell ----- Original Message ----- From: "Tailwind-List Digest Server" <tailwind-list-digest@matronics.com> Subject: Tailwind-List Digest: 2 Msgs - 02/07/03 > * > > ================================================== > Online Versions of Today's List Digest Archive > ================================================== > > Today's complete Tailwind-List Digest can be also be found in either > of the two Web Links listed below. The .html file includes the Digest > formatted in HTML for viewing with a web browser and features Hyperlinked > Indexes and Message Navigation. The .txt file includes the plain ASCII > version of the Tailwind-List Digest and can be viewed with a generic > text editor such as Notepad or with a web browser. > > HTML Version: > > http://www.matronics.com/digest/tailwind-list/Digest.Tailwind-List.2003-02-0 7.html > > Text Version: > > http://www.matronics.com/digest/tailwind-list/Digest.Tailwind-List.2003-02-0 7.txt > > > ================================================ > EMail Version of Today's List Digest Archive > ================================================ > > > Tailwind-List Digest Archive > --- > Total Messages Posted Fri 02/07/03: 2 > > > Today's Message Index: > ---------------------- > > 1. 02:51 PM - Fuel Tank (William Bernard) > 2. 04:08 PM - Re: Fuel Tank (Richard Lamb) > > > ________________________________ Message 1 _____________________________________ > > > Time: 02:51:52 PM PST US > From: "William Bernard" <billbernard@worldnet.att.net> > Subject: Tailwind-List: Fuel Tank > > --> Tailwind-List message posted by: "William Bernard" <billbernard@worldnet.att.net> > > I finally got the fuel tank to the point that I could measure the capacity. > > It holds 34 gallons! > > I just had to tell somebody > > Bill > > > ________________________________ Message 2 _____________________________________ > > > Time: 04:08:23 PM PST US > From: Richard Lamb <lamb01@flash.net> > Subject: Re: Tailwind-List: Fuel Tank > > --> Tailwind-List message posted by: Richard Lamb <lamb01@flash.net> > > Dimensions and Pix? > > Hurry up, Bill! > > > William Bernard wrote: > > > > --> Tailwind-List message posted by: "William Bernard" <billbernard@worldnet.att.net> > > > > I finally got the fuel tank to the point that I could measure the capacity. > > > > It holds 34 gallons! > > > > I just had to tell somebody > > > > Bill > > > >




    Other Matronics Email List Services

  • Post A New Message
  •   tailwind-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/Tailwind-List.htm
  • Full Archive Search Engine
  •   http://www.matronics.com/search
  • 7-Day List Browse
  •   http://www.matronics.com/browse/tailwind-list
  • Browse Tailwind-List Digests
  •   http://www.matronics.com/digest/tailwind-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contributions

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --