---------------------------------------------------------- Tailwind-List Digest Archive --- Total Messages Posted Wed 02/12/03: 6 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 07:33 AM - Exhaust Systems (IslPilot@aol.com) 2. 08:19 AM - Re: Exhaust Systems (Boud Kuenen) 3. 12:15 PM - Re: Exhaust Systems (Davstamsta@aol.com) 4. 07:58 PM - wings (john) 5. 08:15 PM - Re: wings (George Turner) 6. 08:17 PM - O-O W&B (Rick and Cindy) ________________________________ Message 1 _____________________________________ Time: 07:33:00 AM PST US From: IslPilot@aol.com Subject: Tailwind-List: Exhaust Systems --> Tailwind-List message posted by: IslPilot@aol.com Working away on #557 for to get airworthy for this summer's activities. What is the preferred exhaust system for the Tailwind with a Lyc. 0-320? I see Vetterman advertises in the Tailwind Times. Are guys using a crossover or 4-pipe setup? Tnx in Advance, Paul Baron Charlevoix, MI #557 ________________________________ Message 2 _____________________________________ Time: 08:19:31 AM PST US From: "Boud Kuenen" Subject: Re: Tailwind-List: Exhaust Systems --> Tailwind-List message posted by: "Boud Kuenen" Paul, I have a Vetterman on my O-320, and it is a beautiful system. Larry is a great guy to work with but he is "very proud of his work". I met John Forsling at his OSH booth last year who also does beautiful work for about $200 less. His address is 127887 N. Fifth Street, Parker, CO 80134: 303-841-6054. I personally think it is worth the money for a stainless system, even though it'll cost you well over $500. Boud Kuenen NX888WT ----- Original Message ----- From: Subject: Tailwind-List: Exhaust Systems > --> Tailwind-List message posted by: IslPilot@aol.com > > Working away on #557 for to get airworthy for this summer's activities. What > is the preferred exhaust system for the Tailwind with a Lyc. 0-320? I see > Vetterman advertises in the Tailwind Times. Are guys using a crossover or > 4-pipe setup? > > Tnx in Advance, > > Paul Baron > Charlevoix, MI > #557 > > ________________________________ Message 3 _____________________________________ Time: 12:15:03 PM PST US From: Davstamsta@aol.com Subject: Re: Tailwind-List: Exhaust Systems --> Tailwind-List message posted by: Davstamsta@aol.com Paul, I just received my exhaust from John Forsling. It is a work of art! He was great to work with and his price is quite fair. I ordered his 3-d kit where you get a bunch of pvc pipe and some superglue to make up the tail pipe for a custom fit. His turnaround time was great. Also does nice heat exchangers and an air-oil seperater. David Stamsta Michigan - W10 N917WT ________________________________ Message 4 _____________________________________ Time: 07:58:08 PM PST US From: "john" Subject: Tailwind-List: wings --> Tailwind-List message posted by: "john" Jim; What size holes are you putting in the bottom of the wings to install the nuts that hold the flap and aileron attach bolts in place? It looks like I should locate these before I attach the upper wing plywood. I have epoxyed the washers in place as you suggested. Thankyou JohnD. ________________________________ Message 5 _____________________________________ Time: 08:15:19 PM PST US From: George Turner Subject: Re: Tailwind-List: wings --> Tailwind-List message posted by: George Turner John: Jim C. is at His Airpark home, Indian Hills, Salome, Az until the fist of March, without email access. George....Phoenix john wrote:--> Tailwind-List message posted by: "john" Jim; What size holes are you putting in the bottom of the wings to install the nuts that hold the flap and aileron attach bolts in place? It looks like I should locate these before I attach the upper wing plywood. I have epoxyed the washers in place as you suggested. Thankyou JohnD. --------------------------------- ________________________________ Message 6 _____________________________________ Time: 08:17:47 PM PST US From: Rick and Cindy Subject: Tailwind-List: O-O W&B --> Tailwind-List message posted by: Rick and Cindy Drafted a preliminary weight and balance for O-O II tonight. LOOKS LIKE IT'S GONNA WORK!! Rick O-O II N241SW