----------------------------------------------------------
                           Tailwind-List Digest Archive
                                      ---
                     Total Messages Posted Tue 03/11/03: 3
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 05:02 AM - Re: Fw: welding rod  (David Stroud)
     2. 05:41 PM - Fuse Front Dimensions  (David Lamphere)
     3. 06:15 PM - Re: Fuse Front Dimensions  (Jerry Hey)
 
 
 
________________________________  Message 1  _____________________________________


Time: 05:02:26 AM PST US
From: "David Stroud" <davestroud@rogers.com>
Subject: Re: Tailwind-List: Fw: welding rod

--> Tailwind-List message posted by: "David Stroud" <davestroud@rogers.com>

If you go to this site and slide down to about the 12th file, you'll find a complete
price list from Dillsburg Aero in PDF format.
http://www.mykitplane.com/Planes/filesList2.cfm?AlbumID=5
Nicely enough, they are right on our way to Sun n Fun.

Dave Stroud
L 16 B replica (Christavia)
C-FDWS   Ottawa, Canada


----- Original Message ----- 
From: "Luc Hermange" <lucskywalker@earthlink.net>
Subject: Re: Tailwind-List: Fw: welding rod


> --> Tailwind-List message posted by: "Luc Hermange" <lucskywalker@earthlink.net>
> 
> Earl, what type of rod do you use?
> 
> Charlie Vogelsong / Dillsburg Aero is the largest supplier of 4130 in the
> world. If you want to read a really good article on Charlie and Dillsburg
> Aero go to http://airbum.com/articles/ArticleDillsburgAero.html
> 
> When you order tubing from Charlie you'd better know EXACTLY what you want
> (gauge numbers are not understood there, so convert to decimal before
> ordering) he is a no nonsense type of guy.






________________________________  Message 2  _____________________________________


Time: 05:41:28 PM PST US
From: "David Lamphere" <lamphere@earthlink.net>
Subject: Tailwind-List: Fuse Front Dimensions

--> Tailwind-List message posted by: "David Lamphere" <lamphere@earthlink.net>

Would someone tell me what the dimensions are for the fuselage at the
firewall?
I want to be able to install one of Jerry's motor mounts if need be.

The "stock" plans show 37in ctr to ctr between the top longerons, 34in ctr
to ctr between the bottom longerons, and 25in ctr to ctr between the btm
longerons and the top longerons.

Thanks,
Dave Lamphere






________________________________  Message 3  _____________________________________


Time: 06:15:18 PM PST US
Subject: Re: Tailwind-List: Fuse Front Dimensions
From: Jerry Hey <j-winddesigns@thegrid.net>

--> Tailwind-List message posted by: Jerry Hey <j-winddesigns@thegrid.net>

That is correct.   The engine mount attaches to gussets at each corner.  
   Jerry
On Tuesday, March 11, 2003, at 05:45  PM, David Lamphere wrote:

> --> Tailwind-List message posted by: "David Lamphere"  
> <lamphere@earthlink.net>
>
> Would someone tell me what the dimensions are for the fuselage at the
> firewall?
> I want to be able to install one of Jerry's motor mounts if need be.
>
> The "stock" plans show 37in ctr to ctr between the top longerons, 34in  
> ctr
> to ctr between the bottom longerons, and 25in ctr to ctr between the  
> btm
> longerons and the top longerons.
>
> Thanks,
> Dave Lamphere
>
>
> _- 
> ======================================================================
> _- 
> ======================================================================
> _- 
> ======================================================================
> _- 
> ======================================================================
>
>