----------------------------------------------------------
                           Tailwind-List Digest Archive
                                      ---
                     Total Messages Posted Wed 08/20/03: 1
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 02:03 PM - Re: Drain Holes  (Bruce Green)
 
 
 
________________________________  Message 1  _____________________________________


Time: 02:03:53 PM PST US
Subject: Re: Tailwind-List: Drain Holes
From: Bruce Green <mailindex@juno.com>

--> Tailwind-List message posted by: Bruce Green <mailindex@juno.com>

Mike,

I dont have a tailwind, but on my Eagle, the holes are as Bill said, on
either side if the ribs, and there are no gromets, just a soldering iron
melted hole through a double layer of fabric.  Obviously this isnt an
option if you are using cotton.

What system are you using?

Bruce Green
Eagle N110GM

On Tue, 19 Aug 2003 06:52:44 -0500 "William Bernard"
<billbernard@worldnet.att.net> writes:
> --> Tailwind-List message posted by: "William Bernard" 
> <billbernard@worldnet.att.net>
> 
> Mike, I put mine on either side of the ribs at the low point when 
> the
> aircraft is on the ground.
> 
> Bill
> ----- Original Message -----
> From: "Ruhnke, Mike" <ruhnkem@rayovac.com>
> To: "Tailwind-List (E-mail)" <tailwind-list@matronics.com>
> Subject: Tailwind-List: Drain Holes
> 
> 
> > --> Tailwind-List message posted by: "Ruhnke, Mike" 
> <ruhnkem@rayovac.com>
> >
> > I'm in the process of putting fabric on the old Tailwind and I'm 
> wondering
> what existing Tailwind owners have for drain holes in their tail 
> feathers,
> flaps and ailerons?
> >
> > Mike NW, Illinois
> >
> >
> 
> 
>
>
> 
> 
> 
> 
> 


The best thing to hit the internet in years - Juno SpeedBand!
Surf the web up to FIVE TIMES FASTER!