----------------------------------------------------------
                           Tailwind-List Digest Archive
                                      ---
                     Total Messages Posted Wed 10/29/03: 4
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 10:18 AM - Clements style light  (Paul Holmes)
     2. 11:56 AM - Re: Clements style light  (Jim and Donna Clement)
     3. 12:03 PM - Re: Clements style light  (Jim and Donna Clement)
     4. 02:14 PM - Re: Fw: ebay engine  (David Lamphere)
 
 
 
________________________________  Message 1  _____________________________________


Time: 10:18:24 AM PST US
From: "Paul Holmes" <pholmes@wmis.net>
Subject: Tailwind-List: Clements style light

--> Tailwind-List message posted by: "Paul Holmes" <pholmes@wmis.net>

What postion light do you use and how big is the notch in the tip for the light?
How about the plastic cover?
Paul Holmes pholmes@wmis.net






________________________________  Message 2  _____________________________________


Time: 11:56:01 AM PST US
From: "Jim and Donna Clement" <168x@merr.com>
Subject: Re: Tailwind-List: Clements style light

--> Tailwind-List message posted by: "Jim and Donna Clement" <168x@merr.com>

Paul' The notch is 4" in length and from the leading edge to the front face
of the spar. You can use about any automotive bulb that will fit in the
space. One that works well is a tubular bulb with a loop sticking out each
end. I forget the number but it is used in some dome lights.  Jim


----- Original Message -----
From: "Paul Holmes" <pholmes@wmis.net>
Subject: Tailwind-List: Clements style light


> --> Tailwind-List message posted by: "Paul Holmes" <pholmes@wmis.net>
>
> What postion light do you use and how big is the notch in the tip for the
light? How about the plastic cover?
> Paul Holmes pholmes@wmis.net
>
>






________________________________  Message 3  _____________________________________


Time: 12:03:20 PM PST US
From: "Jim and Donna Clement" <168x@merr.com>
Subject: Re: Tailwind-List: Clements style light

--> Tailwind-List message posted by: "Jim and Donna Clement" <168x@merr.com>

Forgot the plastic lens question, you have to make it from a piece of
colored Plexiglas. Heat it to 315-320 and wrap it around a form, then glue a
end cap on. Nothing to it, in about three days you will have two lens.
Practice on some scrap clear plex first. It's a lot easier to screw some
factory lights on the end.  Jim

----- Original Message -----
From: "Paul Holmes" <pholmes@wmis.net>
Subject: Tailwind-List: Clements style light


> --> Tailwind-List message posted by: "Paul Holmes" <pholmes@wmis.net>
>
> What postion light do you use and how big is the notch in the tip for the
light? How about the plastic cover?
> Paul Holmes pholmes@wmis.net
>
>






________________________________  Message 4  _____________________________________


Time: 02:14:50 PM PST US
From: "David Lamphere" <lamphere@earthlink.net>
Subject: Re: Tailwind-List: Fw: ebay engine

--> Tailwind-List message posted by: "David Lamphere" <lamphere@earthlink.net>

If it matters (which I am not sure it will after any rebuild) this is a
150hp engine.
Dave

----- Original Message -----
From: "Jim and Donna Clement" <168x@merr.com>
Subject: Tailwind-List: Fw: ebay engine


> --> Tailwind-List message posted by: "Jim and Donna Clement"
<168x@merr.com>
>
>
> ----- Original Message -----
> From: "Jim and Donna Clement" <168x@merr.com>
> To: "Jim Clement" <168x@merr.com>
> Subject: ebay engine
>
>
> >
> >
>
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2439353286&cat
> > egory=26437
> >
>
>