Today's Message Index:
----------------------
1. 01:52 AM - Re: Test (Fred Weaver)
2. 08:02 AM - Re: SUPER POST JIM (Hjelle)
3. 09:46 AM - Re: Re:Contributors to the list?? (Eric Schlanser)
4. 07:28 PM - Re: Culvers (Fred Weaver)
5. 07:29 PM - Re: Culvers (Fred Weaver)
6. 07:35 PM - Re: Rich's pics (Fred Weaver)
7. 08:04 PM - More Culvers (Fred Weaver)
8. 08:44 PM - Re: [TailwindForum] More Culvers (Fred Weaver)
9. 09:12 PM - Culver's stuff (Fred Weaver)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> Tailwind-List message posted by: "Fred Weaver" <Mytyweav@earthlink.net>
Hey George! All your stuff sounds just like Caleeforneeia......except our
temps are a little lower. Haven't felt an earthquake in years. Always
thought they were a good time. Wishin' it would rain some more, no mudslides
and I guess since the fires in SOUTHERN California went away, we haven't
even had a good weenie roast.
BTW, I have noticed the same delay in getting mail to the forum... Frankly,
it's pissing me off...........
Yeeeeehaaaaaa,
Weav
Flying lots too..... I expect to see lots of hours on your tach when I
visit.....
----- Original Message -----
From: "George Turner" <tailwind222@yahoo.com>
Subject: Re: Tailwind-List: Test
> --> Tailwind-List message posted by: George Turner <tailwind222@yahoo.com>
>
> Fred, thanks, my Yahoo email is taking up to a day to travel. I have a
good one on the way. Look for it. George....Phoenix......78 degrees..no
snow, earthquakes, mudslides, fires, rain....just super flying weather all
the time, until summer.
>
> Fred Weaver <Mytyweav@earthlink.net> wrote:--> Tailwind-List message
posted by: "Fred Weaver"
>
> Worked Great George....
>
> ----- Original Message -----
> From: "George Turner"
> To:
> Subject: Tailwind-List: Test
>
>
> ---------------------------------
>
>
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: SUPER POST JIM |
--> Tailwind-List message posted by: "Hjelle" <hjelle@dotnet.com>
Back in the 30's, Wittman switched engines on the "Chief". The
original engine was an American Cirrus of about 100HP. He replaced it
with a Cirrus Hermes of 115HP. The Hermes engine ended up in my dad's
barn for years and before it was put on display at EAA I had the task of
cleaning it up. The engine has a long RECTANGULAR intake manifold and I
asked Steve why. He told me that he originally had built a round
manifold but when he ran the engine it wouldn't it wouldn't pull as much
rpm as with the smaller engine. He hastily built the rectangular one
you can see today and it worked. My opinion is that the round intake
made the air flow too straight causing the fuel to drop out of
atomization. Note the shape of virtually any automotive intake port, it
is rectangular. Using the same logic on exhaust manifold, leads me to
believe round pipes will exit the gases the easiest. Changing the shape
of the outlet will change the back pressure and the tone. The trick is
to reduce the db without reducing the hp.
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re:Contributors to the list?? |
--> Tailwind-List message posted by: Eric Schlanser <eschlanser@yahoo.com>
Fred...I too would rather see the group use the Matronics list. The search engine
is way better. The picture posting is the only advantage and now yahoo dumps
those from the archive. So as far as I am concerned, matronics is as good on
pictures too. Eric - sending Matt a contribution as soon as I can
do not archive
Fred Weaver <Mytyweav@earthlink.net> wrote:
--> Tailwind-List message posted by: "Fred Weaver"
Eric.....I posted this as somewhat of a joke since I like to pick on you but
the truth is... A LOT of the guys that use this list the most, OR SHOULD
don't give Matt a dime. I once had to go over to Matt's house to look at his
RV project. I had an opportunity to see firsthand all the equipment it takes
to do the job. Everyone would be amazed at the level of complexity and high
quality of the equipment it takes to make these lists happen. Then, add to
that all the newer software that continues to enhance the level of security
and features like the new chat thing. The Matronics archives are definitely
easier to browse than Fricken Yahoo...AND WITHOUT ALL THOSE DAMN BANNERS on
EVERY SINGLE POST. The only feature that the Forum has that we all seem to
like is the ability to attach a photo to an email post. I doubt that will
ever change with Matronics' lists but if we just practiced sending photos to
the fileshare thing we would get good at it AND they would never leave the
archives.
I guess this post got a little long but I have to say that since we got on
Yahoo Groups, my level of spam has exploded. I also noticed that Yahoo at
will, changed my personal account settings (along with others) and that we
need to be vigilant with what they do with our settings. I'm sick and tired
of ALL the damn spam.
So, in closing my little rant session here........ I would just like to
encourage all of our Tailwind listers to take a minute and do a paypal thing
for 10 or 20 bucks to Matronics... It's fricken painless....
Weav
----- Original Message -----
From: "Eric Schlanser"
Subject: Re: Tailwind-List: Re:Contributors to the list??
> --> Tailwind-List message posted by: Eric Schlanser
>
> Gee Fred, thanks for the reminder. You California guys really watch out
for each other.
>
> do not archive
> Fred Weaver wrote:
> --> Tailwind-List message posted by: Fred Weaver
>
> hey Eric.... Did you forget to pay your dues??
>
>
> > Schertz, William
> > Schieber, Cedrdic
> > Schilling, Karl
> > Schlafly, Fred
> > Schlatterer, Bill
> > Schmidt, Gregory
> > Schmidt, John & Patty
> > Schneider, Werner
> > Schnitzlein, C.E.
> > Schoenberger, H.Robert
> > Schrimmer, Mark
> > Schroeder, Fire
> > Schroeder, John
> > Schumacher, Roger
> >
>
> do not archive
>
>
> ---------------------------------
>
>
---------------------------------
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> Tailwind-List message posted by: "Fred Weaver" <Mytyweav@earthlink.net>
Hey Larry!!! This truly is Good News! Where in the hell is Rockwall? Somewhere
between Arizona and DFW?
God, this is great, we don't have to go all the way to Baraboo to enjoy some of
their great food....but it's a great excuse to go to Baraboo for sure!
Humble Weav....
----- Original Message -----
From: Larry H
To: TailwindForum@yahoogroups.com
Sent: Saturday, December 06, 2003 5:56 PM
Subject: [TailwindForum] Culvers
Hi Jim,
You would be proud, we now have a Culvers in my town, Rockwall Tx. My wife insisted
that I go and try a cone of custard tonight. At least if you ever take
the long way across Texas you can be at home in Culvers here in the good ole lone
star state !
Oh yea the rest of you keep working on the Tailwinds.
Larry H.
ADVERTISEMENT
To unsubscribe from this group, send an email to:
TailwindForum-unsubscribe@yahoogroups.com
The Tailwind Forum group site is: http://groups.yahoo.com/group/TailwindForum
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> Tailwind-List message posted by: "Fred Weaver" <Mytyweav@earthlink.net>
I guess I shoulda read this one first... Have a better idea of where Rockwall
is now...
Nav Weav
----- Original Message -----
From: flamini2
To: TailwindForum@yahoogroups.com
Sent: Saturday, December 06, 2003 6:01 PM
Subject: Re: [TailwindForum] Culvers
Larry,
i flew over your house 23 times so far this year on my way from Chicago to DFW!!!
Maybe we can meet?
Dennis in Chicago, Dallas next week.
----- Original Message -----
From: Larry H
To: TailwindForum@yahoogroups.com
Sent: Saturday, December 06, 2003 7:56 PM
Subject: [TailwindForum] Culvers
Hi Jim,
You would be proud, we now have a Culvers in my town, Rockwall Tx. My wife
insisted that I go and try a cone of custard tonight. At least if you ever take
the long way across Texas you can be at home in Culvers here in the good ole
lone star state !
Oh yea the rest of you keep working on the Tailwinds.
Larry H.
To unsubscribe from this group, send an email to:
TailwindForum-unsubscribe@yahoogroups.com
The Tailwind Forum group site is: http://groups.yahoo.com/group/TailwindForum
ADVERTISEMENT
To unsubscribe from this group, send an email to:
TailwindForum-unsubscribe@yahoogroups.com
The Tailwind Forum group site is: http://groups.yahoo.com/group/TailwindForum
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> Tailwind-List message posted by: "Fred Weaver" <Mytyweav@earthlink.net>
hahahahaha...... Atta way Bob! Geez, I really had to struggle to get to see/view
those pictures so I know what you went thru. hey Rich, can you hear us??
It would have been way too fricken easy to put/post them to an email..
I have gotta figure out a cool way to say "Crazy Connor" as "Crazier Connor" just
doesn't work. hahahhaha...
Bob, you are way up there in my book. Love the Karts and I'm especially respectfull
of the way you attacked the cowl project. We need to hook up and blast around.
I may just have to fly down to Texas so we can go to Culvers too...
Weav
----- Original Message -----
From: Bob Conner
To: TailwindForum@yahoogroups.com
Sent: Saturday, December 06, 2003 1:28 PM
Subject: Re: [TailwindForum] Jim C seat photos
Fred I thought I was the only one having trouble veiwing the pics. I sign in
and it still won't let me see the photos. It drives me crazy. Wait I'm already
crazy. It drives me crazier...........Bob
>From: "Fred Weaver"
>Reply-To: TailwindForum@yahoogroups.com
>To:
>Subject: Re: [TailwindForum] Jim C seat photos
>Date: Sat, 6 Dec 2003 13:16:17 -0800
>
>Rich.... Sure was a pain in the ass to get to the pics but I made it.. As
>usual, Yahoo revised something and it would not acknowledge that I was part
>of the "group"... So, it would not let me access the photo portion of the
>site. Ok....I had to go clicking around to find out which "groups" I was
>subscribed to.. Wouldn't you know it, I wasn't in the Tailwind group(again).
>So a few clicks later it says I actually am a part of the Tailwind forum and
>then it allowed me to open the fricken pictures. I'm seriously getting fed
>up with the Yahooo way of doing things.
>The seats?? They look typical Jim... Nice and light as well as comfortable.
>They also appear to be the slider type for adjustment. Is that right Jim?
>With the long tails out the back, it appears you are going back to the
>slider style.. And that nice wide back will be great to ride in for those
>long hauls down to AZ....
>Weav
>
>----- Original Message -----
>From: "rjrellis"
>To:
>Sent: Saturday, December 06, 2003 1:02 PM
>Subject: [TailwindForum] Jim C seat photos
>
>
> > Given the response for the Jim C seat photos, I uploaded the pictures
> > to the 'Photos' (see sidebar on the left while on the TailwindForum
> > website) section under Jim C photo album. Rich
> >
> >
> >
> > To unsubscribe from this group, send an email to:
> > TailwindForum-unsubscribe@yahoogroups.com
> >
> > The Tailwind Forum group site is:
>http://groups.yahoo.com/group/TailwindForum
> >
> >
> >
> >
>
Wonder if the latest virus has gotten to your computer? Find out. Run the FREE
McAfee online computer scan now!
ADVERTISEMENT
To unsubscribe from this group, send an email to:
TailwindForum-unsubscribe@yahoogroups.com
The Tailwind Forum group site is: http://groups.yahoo.com/group/TailwindForum
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> Tailwind-List message posted by: "Fred Weaver" <Mytyweav@earthlink.net>
You know...... It's really one of those special things we get to do when we visit
Wisconsin... What do I like about Culvers? Those folks just have the nicest
people working for them, and they have a spotless facility and finally, I don't
think there is anything you could order that you wouldn't really enjoy. Those
fricken Baraboo pilots have it made. They are down there almost every day
at lunch hour..... We only get to partake a few days out of each year. I guess
that way, we don't get so jaded...hahhhahhaha.. Jim C is right though...and
Rick C confirmed it this year, that damned Double butter whatever it is cheeseburger
is just the most awesome thing you could get on a plate.........and of
course, there are the french fries there to surround it...
Life is good,
Weav
Hey Jerry Hey!.... Are you listening?? You are only a couple hours away now........
Damn!!!!!!!
----- Original Message -----
From: Larry H
To: TailwindForum@yahoogroups.com
Sent: Saturday, December 06, 2003 7:53 PM
Subject: Re: [TailwindForum] Re: Culvers
Actually we are about 20 miles east of Dallas off of I-30.
I guess I should be like Jim and go down and try and collect some coupons for
the flood of Tailwind guys that will be coming here now ! I just need to convince
them of all the customers I will be bringing in the near future. I think
I will just go and tell them I know Jim C, then I will have a chance !
Larry
----- Original Message -----
From: Fred Weaver
To: TailwindForum@yahoogroups.com
Cc: tailwind-list@matronics.com
Sent: Saturday, December 06, 2003 9:23 PM
Subject: [TailwindForum] Re: Culvers
Hey Larry!!! This truly is Good News! Where in the hell is Rockwall? Somewhere
between Arizona and DFW?
God, this is great, we don't have to go all the way to Baraboo to enjoy some
of their great food....but it's a great excuse to go to Baraboo for sure!
Humble Weav....
----- Original Message -----
From: Larry H
To: TailwindForum@yahoogroups.com
Sent: Saturday, December 06, 2003 5:56 PM
Subject: [TailwindForum] Culvers
Hi Jim,
You would be proud, we now have a Culvers in my town, Rockwall Tx. My wife
insisted that I go and try a cone of custard tonight. At least if you ever take
the long way across Texas you can be at home in Culvers here in the good ole
lone star state !
Oh yea the rest of you keep working on the Tailwinds.
Larry H.
To unsubscribe from this group, send an email to:
TailwindForum-unsubscribe@yahoogroups.com
The Tailwind Forum group site is: http://groups.yahoo.com/group/TailwindForum
To unsubscribe from this group, send an email to:
TailwindForum-unsubscribe@yahoogroups.com
The Tailwind Forum group site is: http://groups.yahoo.com/group/TailwindForum
ADVERTISEMENT
To unsubscribe from this group, send an email to:
TailwindForum-unsubscribe@yahoogroups.com
The Tailwind Forum group site is: http://groups.yahoo.com/group/TailwindForum
Message 8
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: [TailwindForum] More Culvers |
--> Tailwind-List message posted by: "Fred Weaver" <Mytyweav@earthlink.net>
I think this is a great idea Dave. It will help support the Baraboo Gang and also
let corporate/Culvers know what is going on nationwide with these flying guys
to support their franchise. I can hardly wait to read what Rick C has to say....or
Luc if he wakes up long enough to respond..
Jerry doesn't count.... he lives out there now. :)
----- Original Message -----
From: Dave Conrad
To: TailwindForum@yahoogroups.com
Sent: Saturday, December 06, 2003 8:26 PM
Subject: Re: [TailwindForum] More Culvers
I'll print all this Culver's stuff and send it to them, Next year at Baraboo
we'll be able to reserve the place for a day. (after a proper shit shoot at Jim"s
hangar of course.) By the way we have 2 excellent Culver's in Wausau, One
not to far from the airport. a car is usually available. Dave Conrad
On Saturday, December 6, 2003, at 10:13 PM, Larry H wrote:
I guess it is awesome that those Baraboo guys get to fly tailwinds, build tailwinds,
sit around in Jim's hangar and tell lies, fly tailwinds and go to Culvers,
but us guys here in Texas get to talk about building tailwinds, watch tailwinds
fly over, sit around my hangar and tell lies, now go to Culvers, and
the winner is WE GET FRESH, FRIED, BAKED, BOILED, GRILLED GIANT GULF SHRIMP "FRESH".
We swim out and and catch them ourselves inbetween all that other stuff
we do ! !
Larry H.
----- Original Message -----
From: Fred Weaver
To: TailwindForum@yahoogroups.com
Cc: tailwind-list@matronics.com
Sent: Saturday, December 06, 2003 10:00 PM
Subject: [TailwindForum] More Culvers
You know...... It's really one of those special things we get to do when we
visit Wisconsin... What do I like about Culvers? Those folks just have the
nicest people working for them, and they have a spotless facility and finally,
I don't think there is anything you could order that you wouldn't really enjoy.
Those fricken Baraboo pilots have it made. They are down there almost every
day at lunch hour..... We only get to partake a few days out of each year.
I guess that way, we don't get so jaded...hahhhahhaha.. Jim C is right though...and
Rick C confirmed it this year, that damned Double butter whatever it is
cheeseburger is just the most awesome thing you could get on a plate.........and
of course, there are the french fries there to surround it...
Life is good,
Weav
Hey Jerry Hey!.... Are you listening?? You are only a couple hours away now........
Damn!!!!!!!
----- Original Message -----
From: Larry H
To: TailwindForum@yahoogroups.com
Sent: Saturday, December 06, 2003 7:53 PM
Subject: Re: [TailwindForum] Re: Culvers
Actually we are about 20 miles east of Dallas off of I-30.
I guess I should be like Jim and go down and try and collect some coupons for
the flood of Tailwind guys that will be coming here now ! I just need to convince
them of all the customers I will be bringing in the near future. I think
I will just go and tell them I know Jim C, then I will have a chance !
Larry
----- Original Message -----
From: Fred Weaver
To: TailwindForum@yahoogroups.com
Cc: tailwind-list@matronics.com
Sent: Saturday, December 06, 2003 9:23 PM
Subject: [TailwindForum] Re: Culvers
Hey Larry!!! This truly is Good News! Where in the hell is Rockwall? Somewhere
between Arizona and DFW?
God, this is great, we don't have to go all the way to Baraboo to enjoy some
of their great food....but it's a great excuse to go to Baraboo for sure!
Humble Weav....
----- Original Message -----
From: Larry H
To: TailwindForum@yahoogroups.com
Sent: Saturday, December 06, 2003 5:56 PM
Subject: [TailwindForum] Culvers
Hi Jim,
You would be proud, we now have a Culvers in my town, Rockwall Tx. My wife
insisted that I go and try a cone of custard tonight. At least if you ever take
the long way across Texas you can be at home in Culvers here in the good ole
lone star state !
Oh yea the rest of you keep working on the Tailwinds.
Larry H.
To unsubscribe from this group, send an email to:
TailwindForum-unsubscribe@yahoogroups.com
The Tailwind Forum group site is: http://groups.yahoo.com/group/TailwindForum
To unsubscribe from this group, send an email to:
TailwindForum-unsubscribe@yahoogroups.com
The Tailwind Forum group site is: http://groups.yahoo.com/group/TailwindForum
To unsubscribe from this group, send an email to:
TailwindForum-unsubscribe@yahoogroups.com
The Tailwind Forum group site is: http://groups.yahoo.com/group/TailwindForum
To unsubscribe from this group, send an email to:
TailwindForum-unsubscribe@yahoogroups.com
The Tailwind Forum group site is: http://groups.yahoo.com/group/TailwindForum
<image.tiff>
To unsubscribe from this group, send an email to:
TailwindForum-unsubscribe@yahoogroups.com
The Tailwind Forum group site is: http://groups.yahoo.com/group/TailwindForum
Message 9
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> Tailwind-List message posted by: "Fred Weaver" <Mytyweav@earthlink.net>
Even a W8 can limp into DLL with low fuel...........and the pilot will still get
a ride to Culvers for some chow. That guy could even have a subaru and get a
ride. Or, big ass square tubing or worse yet, a reduction drive working with
a Corvair.... And they would still get a ride into town for lunch. I remember
when an acquaintance of mine (scared to say a friend, hahhahhaha) flew into
Baraboo with a big Yellow High wing shitbox and the guys took him into town(Culvers)
for a burger... Seems like he said he was from the "Bay Area" and Jim
started probing...... Sure enough, he figured out who Barry was... hahahhahhaha....
The rest of the story is out there for Jim.
I think Culvers holds some real interesting history somewhere within it's walls......
Wishin' I had a cheeseburger.........
Weav
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|