---------------------------------------------------------- Tailwind-List Digest Archive --- Total Messages Posted Wed 02/04/04: 6 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 02:44 PM - nose pant (Jim and Donna Clement) 2. 02:51 PM - Re ebay nose pant (George Turner) 3. 05:39 PM - Emailing: seats 002 (Jim and Donna Clement) 4. 05:50 PM - Emailing: seats 004 (Jim and Donna Clement) 5. 05:53 PM - Emailing: seats 003 (Jim and Donna Clement) 6. 09:36 PM - Re: Emailing: seats 003 (Earl Luce) ________________________________ Message 1 _____________________________________ Time: 02:44:22 PM PST US From: "Jim and Donna Clement" <168x@merr.com> Subject: Tailwind-List: nose pant --> Tailwind-List message posted by: "Jim and Donna Clement" <168x@merr.com> RVA nose wheel pant on eBay, item 2457180516 2 hours until close. ________________________________ Message 2 _____________________________________ Time: 02:51:34 PM PST US From: George Turner Subject: Tailwind-List: Re ebay nose pant http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2457180516 Jim and Donna Clement <168x@merr.com> wrote:--> Tailwind-List message posted by: "Jim and Donna Clement" <168x@merr.com> RVA nose wheel pant on eBay, item 2457180516 2 hours until close. --------------------------------- ________________________________ Message 3 _____________________________________ Time: 05:39:39 PM PST US From: "Jim and Donna Clement" <168x@merr.com> Subject: Tailwind-List: Emailing: seats 002 Holes in bottom of seat rails slip over the bent welded bolt. ________________________________ Message 4 _____________________________________ Time: 05:50:51 PM PST US From: "Jim and Donna Clement" <168x@merr.com> Subject: Tailwind-List: Emailing: seats 004 The cross tube about 4" back can be omitted. Best tubing size is, bottom side rails 3/4x.035 cross tubes, 5/8x.028 or .035 seat backs, 1/2"x.028 or .035 ________________________________ Message 5 _____________________________________ Time: 05:53:53 PM PST US From: "Jim and Donna Clement" <168x@merr.com> Subject: Tailwind-List: Emailing: seats 003 Putting 3 or 4 holes in the bottom rails make it adjustable ________________________________ Message 6 _____________________________________ Time: 09:36:19 PM PST US From: "Earl Luce" Subject: Re: Tailwind-List: Emailing: seats 003 --> Tailwind-List message posted by: "Earl Luce" Jim, What is the cross bar for about 4" behind the front tube ? Isn't this where you use to weld a strap ? Earl ----- Original Message ----- From: "Jim and Donna Clement" <168x@merr.com> Subject: Tailwind-List: Emailing: seats 003 > Putting 3 or 4 holes in the bottom rails make it adjustable