----------------------------------------------------------
                           Tailwind-List Digest Archive
                                      ---
                     Total Messages Posted Mon 04/26/04: 1
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 04:16 PM - Re: Does anyone need wing materials?  (Bob Triplett)
 
 
 
________________________________  Message 1  _____________________________________


Time: 04:16:19 PM PST US
From: Bob Triplett <tailwind@chibardun.net>
Subject: Re: Tailwind-List: Does anyone need wing materials?

How much are you asking for the materials?

Bruce E. Butts wrote:

> --> Tailwind-List message posted by: "Bruce E. Butts" 
> <bbutts@columbus.rr.com>
>
> I recently acquired the Tailwind fuselage that was listed on EBay 
> (Thanks to George Turner for the heads up on that).  When I picked up 
> the fuselage, I found that three pieces of 14 foot long by 5 and 9/16 
> inch wide and 3/4 inch thick spruce came with it and 8 sheets of 3/32 
> mahogany plywood to cover the wings and probably enough smaller pieces 
> of spruce to make all the ribs too. 
> I am building metal wings so I do not need the spruce and plywood.  
> Does anyone need wing materials?
>
> I am in Columbus Ohio and while I am thrilled to have the fuselage, I 
> will have to completely reorganize my shop to store the spruce and 
> plywood properly.  So if someone needs it and is willing to come get 
> it, I am willing to sell it to recoup a little of my expense.
>
> Bruce E. Butts
>
>>  
>>
>
>