---------------------------------------------------------- Tailwind-List Digest Archive --- Total Messages Posted Sat 05/22/04: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 06:52 PM - Re: Fairings (IslPilot@aol.com) 2. 09:23 PM - Re: Re: Fairings (red) ________________________________ Message 1 _____________________________________ Time: 06:52:43 PM PST US From: IslPilot@aol.com Subject: Tailwind-List: Re: Fairings I have been sniffing epoxy and playing with modeling clay all day trying to get the perfect streamlining job on my wheel fairings. Not hardly.....hard to get good symmetry when your klutzy. I was doing 185 mph with the 150hp 0-320 with just the gear legs faired and no wheel fairings. We will report back on the results. A harder and longer part of the project than I anticipated. Paul N557CL Charlevoix, MI ________________________________ Message 2 _____________________________________ Time: 09:23:27 PM PST US From: "red" Subject: Re: Tailwind-List: Re: Fairings Paul, It took me most of the winter to do the fairing installations and make the cuffs. I thought it would be three weeks or so--took 3 1/2 months. Hope that you are faster than I was. Red NX374WT ----- Original Message ----- From: IslPilot@aol.com To: tailwind-list@matronics.com Sent: Saturday, May 22, 2004 6:49 PM Subject: Tailwind-List: Re: Fairings I have been sniffing epoxy and playing with modeling clay all day trying to get the perfect streamlining job on my wheel fairings. Not hardly.....hard to get good symmetry when your klutzy. I was doing 185 mph with the 150hp 0-320 with just the gear legs faired and no wheel fairings. We will report back on the results. A harder and longer part of the project than I anticipated. Paul N557CL Charlevoix, MI