Today's Message Index:
----------------------
1. 02:59 PM - Fw: Emailing: stab fabric TW9 (Jim and Donna Clement)
2. 03:09 PM - Emailing: stab ready for surface tape TW9 (Jim and Donna Clement)
3. 03:41 PM - Re: Emailing: stab ready for surface tape TW9 (James Connell)
4. 04:21 PM - Re: Fw: Emailing: stab fabric TW9 (Rich Ellis)
5. 05:05 PM - Re: Emailing: stab ready for surface tape TW9 (Jerry Hey)
6. 05:14 PM - Re: Fw: Emailing: stab fabric TW9 (Jim and Donna Clement)
7. 06:15 PM - Brian Alley's Composites Products (Mcculleyja@aol.com)
8. 06:15 PM - Re: Fw: Emailing: stab fabric TW9 (Rich Ellis)
9. 06:19 PM - Re: Fw: Emailing: stab fabric TW9 (Luc H.)
10. 06:22 PM - Re: Emailing: stab ready for surface tape TW9 (Bob Conner)
11. 06:38 PM - Re: Brian Alley's Composites Products (Luc H.)
12. 06:48 PM - Re: Emailing: stab ready for surface tape TW9 (IslPilot@aol.com)
13. 07:01 PM - Re: Emailing: stab ready for surface tape TW9 (Alex Frizzell)
14. 08:55 PM - Re: Brian Alley's Composites Products (Mcculleyja@aol.com)
15. 09:02 PM - Re: Brian Alley's Composites Products (Mcculleyja@aol.com)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Fw: Emailing: stab fabric TW9 |
----- Original Message -----
From: "Jim and Donna Clement" <168x@merr.com>
Subject: Emailing: stab fabric TW9
> There is more waste this method but fabric is cheap. Jim C
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Emailing: stab ready for surface tape TW9 |
Which forum works out best for pictures. I have had a few people say they
can't see them on Yahoo. Jim C I
prefer Matronics
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Emailing: stab ready for surface tape TW9 |
--> Tailwind-List message posted by: "James Connell" <conneljr@bigpond.net.au>
Jim C. both work for me..great pictures..an invaluable resource for all
builders, keep them coming . hope Jerry is keeping them for his upcoming on
line manual. regards jim connell.
----- Original Message -----
From: Jim and Donna Clement <168x@merr.com>
Subject: Tailwind-List: Emailing: stab ready for surface tape TW9
>
> Which forum works out best for pictures. I have had a few people say they
> can't see them on Yahoo. Jim C I
> prefer Matronics
>
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Fw: Emailing: stab fabric TW9 |
--> Tailwind-List message posted by: Rich Ellis <rjrellis@yahoo.com>
Jim,
I received your photos from both Yahoo and Matronics.
I would suggest that you continue to send to both
forums, otherwise there will be some that can't view
photos because they only get photos though one of the
forums websites.
Plan to be in Baraboo tomorrow morning. Looks like
Clint in ready for his landing gear also. Rich
--- Jim and Donna Clement <168x@merr.com> wrote:
>
> ----- Original Message -----
> From: "Jim and Donna Clement" <168x@merr.com>
> To: <tailwind-list@matronics.com>
> Sent: Sunday, July 04, 2004 4:49 PM
> Subject: Emailing: stab fabric TW9
>
>
> > There is more waste this method but fabric is
> cheap. Jim C
> ATTACHMENT part 2 image/jpeg name=stab fabric 3.jpg
> ATTACHMENT part 3 image/jpeg name=stab fabric.jpg
=====
Richard L. Ellis, M.D.
Gundersen Lutheran Health System
Co-Director
Norma J. Vinger Center for Breast Care
1900 South Avenue
La Crosse, WI 54601
800.362.9567, ext. 52102
rjrellis@yahoo.com
__________________________________
http://promotions.yahoo.com/new_mail
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Emailing: stab ready for surface tape TW9 |
--> Tailwind-List message posted by: Jerry Hey <j-winddesigns@thegrid.net>
Yes, every picture and comment is saved and will be on the site.
Maybe (I hope) the series will continue thru painting. Jerry
On Sunday, July 4, 2004, at 06:47 PM, James Connell wrote:
> --> Tailwind-List message posted by: "James Connell"
> <conneljr@bigpond.net.au>
>
> Jim C. both work for me..great pictures..an invaluable resource for
> all
> builders, keep them coming . hope Jerry is keeping them for his
> upcoming on
> line manual. regards jim connell.
> ----- Original Message -----
> From: Jim and Donna Clement <168x@merr.com>
> To: <tailwind-list@matronics.com>
> Sent: Monday, July 05, 2004 8:08 AM
> Subject: Tailwind-List: Emailing: stab ready for surface tape TW9
>
>
>>
>> Which forum works out best for pictures. I have had a few people say
>> they
>> can't see them on Yahoo. Jim C I
>> prefer Matronics
>>
>
>
> _-
> =======================================================================
> > _-
> =======================================================================
> > _-
> =======================================================================
> > _-
> =======================================================================
> >
>
>
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Fw: Emailing: stab fabric TW9 |
--> Tailwind-List message posted by: "Jim and Donna Clement" <168x@merr.com>
Rich, It will be one or the other. For us that have dial up, it takes a long
time to send and receive pictures. I prefer Matronics, shouldn't be a
problem for those on the Yahoo Forum to sign up to Matronics also. Jim C
----- Original Message -----
From: "Rich Ellis" <rjrellis@yahoo.com>
Subject: Re: Tailwind-List: Fw: Emailing: stab fabric TW9
> --> Tailwind-List message posted by: Rich Ellis <rjrellis@yahoo.com>
>
> Jim,
>
> I received your photos from both Yahoo and Matronics.
> I would suggest that you continue to send to both
> forums, otherwise there will be some that can't view
> photos because they only get photos though one of the
> forums websites.
>
> Plan to be in Baraboo tomorrow morning. Looks like
> Clint in ready for his landing gear also. Rich
>
> --- Jim and Donna Clement <168x@merr.com> wrote:
> >
> > ----- Original Message -----
> > From: "Jim and Donna Clement" <168x@merr.com>
> > To: <tailwind-list@matronics.com>
> > Sent: Sunday, July 04, 2004 4:49 PM
> > Subject: Emailing: stab fabric TW9
> >
> >
> > > There is more waste this method but fabric is
> > cheap. Jim C
>
> > ATTACHMENT part 2 image/jpeg name=stab fabric 3.jpg
>
>
> > ATTACHMENT part 3 image/jpeg name=stab fabric.jpg
>
>
> =====
> Richard L. Ellis, M.D.
> Gundersen Lutheran Health System
> Co-Director
> Norma J. Vinger Center for Breast Care
> 1900 South Avenue
> La Crosse, WI 54601
> 800.362.9567, ext. 52102
> rjrellis@yahoo.com
>
>
> __________________________________
> http://promotions.yahoo.com/new_mail
>
>
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Brian Alley's Composites Products |
3.4 NONSENSE BODY: String of nonsense text
--> Tailwind-List message posted by: Mcculleyja@aol.com
A few days ago I flew my Tailwind to Summersville, W.VA to visit Brian Alley
and see his fabulous facility where he is creating numerous carbon fiber
products for Tailwinds while also working full time on completing a turbine powered
pressurized Lancair for its owner.
The pics that most on this list have seen of Brian's cowling, instrument
panel, wheel pants and spinner plus backing plate show beautiful results but to
see and feel the real items was a distinct pleasure. Those who get to Oshkosh
will no doubt agree when you hold the items and feel the light weight and
stiffness plus the finished surface leaving nothing more than priming and painting
to do. He is also planning on many other products as time permits.
I regret that my oversize Tailwind needs a larger cowling than the standard
W-10 firewall dimensions, so I will have to live with my own non-professional
cowling --unless all you larger fellows who fit too snugly in W-10's eventually
start building O&O size Tailwinds and create a market for Brian to produce
his cowling in the larger size.
Thanks Brian for your time and the tour of your operation. My return flight
home made the 200 miles in 1 hour from takeoff to landing on only 7 gallons.
That's what makes all the tedious years building a Tailwind rapidly fade from
the memory, to be replaced with memorable performance that spam can owners
only dream about even after they spend huge sums to buy the best available. So
keep building, guys & gals!
Jim
Message 8
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Fw: Emailing: stab fabric TW9 |
--> Tailwind-List message posted by: Rich Ellis <rjrellis@yahoo.com>
Jim,
I assumed you had high-speed internet access. If you
don't, as you indicated, go with the one you want
otherwise you will be at your computer all day (and
nite).
Sure enjoy and learn alot from your photos, as I am
sure others do also. Rich
--- Jim and Donna Clement <168x@merr.com> wrote:
> --> Tailwind-List message posted by: "Jim and Donna
> Clement" <168x@merr.com>
>
> Rich, It will be one or the other. For us that have
> dial up, it takes a long
> time to send and receive pictures. I prefer
> Matronics, shouldn't be a
> problem for those on the Yahoo Forum to sign up to
> Matronics also. Jim C
>
> ----- Original Message -----
> From: "Rich Ellis" <rjrellis@yahoo.com>
> To: <tailwind-list@matronics.com>
> Sent: Sunday, July 04, 2004 6:21 PM
> Subject: Re: Tailwind-List: Fw: Emailing: stab
> fabric TW9
>
>
> > --> Tailwind-List message posted by: Rich Ellis
> <rjrellis@yahoo.com>
> >
> > Jim,
> >
> > I received your photos from both Yahoo and
> Matronics.
> > I would suggest that you continue to send to both
> > forums, otherwise there will be some that can't
> view
> > photos because they only get photos though one of
> the
> > forums websites.
> >
> > Plan to be in Baraboo tomorrow morning. Looks like
> > Clint in ready for his landing gear also. Rich
> >
> > --- Jim and Donna Clement <168x@merr.com> wrote:
> > >
> > > ----- Original Message -----
> > > From: "Jim and Donna Clement" <168x@merr.com>
> > > To: <tailwind-list@matronics.com>
> > > Sent: Sunday, July 04, 2004 4:49 PM
> > > Subject: Emailing: stab fabric TW9
> > >
> > >
> > > > There is more waste this method but fabric is
> > > cheap. Jim C
> >
> > > ATTACHMENT part 2 image/jpeg name=stab fabric
> 3.jpg
> >
> >
> > > ATTACHMENT part 3 image/jpeg name=stab
> fabric.jpg
> >
> >
> >
> > =====
> > Richard L. Ellis, M.D.
> > Gundersen Lutheran Health System
> > Co-Director
> > Norma J. Vinger Center for Breast Care
> > 1900 South Avenue
> > La Crosse, WI 54601
> > 800.362.9567, ext. 52102
> > rjrellis@yahoo.com
> >
> >
> >
> > __________________________________
> providers!
> > http://promotions.yahoo.com/new_mail
> >
> >
> >
> >
> >
> >
> >
> >
> >
>
>
>
>
>
>
>
> Contributions
> any other
> Forums.
>
> http://www.matronics.com/chat
>
> http://www.matronics.com/subscription
> http://www.matronics.com/FAQ/Tailwind-List.htm
> http://www.matronics.com/archives
> http://www.matronics.com/photoshare
> http://www.matronics.com/emaillists
>
>
>
>
>
>
=====
Richard L. Ellis, M.D.
Gundersen Lutheran Health System
Co-Director
Norma J. Vinger Center for Breast Care
1900 South Avenue
La Crosse, WI 54601
800.362.9567, ext. 52102
rjrellis@yahoo.com
__________________________________
http://promotions.yahoo.com/new_mail
Message 9
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Fw: Emailing: stab fabric TW9 |
--> Tailwind-List message posted by: "Luc H." <4luc@sbcglobal.net>
As most people are on both list it would be very annoying to get multiple
posting of the same photo's. I have DSL and virtually no limits on size, but
I don't want to pick through duplicates that arrive sometimes hours apart.
Those on dial up with small storage accounts will really hate it.
Both work fine as long as your not receiving daily archives. I vote for
Matronics.
Luc
----- Original Message -----
From: "Rich Ellis" <rjrellis@yahoo.com>
Subject: Re: Tailwind-List: Fw: Emailing: stab fabric TW9
--> Tailwind-List message posted by: Rich Ellis <rjrellis@yahoo.com>
Jim,
I received your photos from both Yahoo and Matronics.
I would suggest that you continue to send to both
forums, otherwise there will be some that can't view
photos because they only get photos though one of the
forums websites.
Plan to be in Baraboo tomorrow morning. Looks like
Clint in ready for his landing gear also. Rich
--- Jim and Donna Clement <168x@merr.com> wrote:
>
> ----- Original Message -----
> From: "Jim and Donna Clement" <168x@merr.com>
> To: <tailwind-list@matronics.com>
> Sent: Sunday, July 04, 2004 4:49 PM
> Subject: Emailing: stab fabric TW9
>
>
> > There is more waste this method but fabric is
> cheap. Jim C
> ATTACHMENT part 2 image/jpeg name=stab fabric 3.jpg
> ATTACHMENT part 3 image/jpeg name=stab fabric.jpg
=====
Richard L. Ellis, M.D.
Gundersen Lutheran Health System
Co-Director
Norma J. Vinger Center for Breast Care
1900 South Avenue
La Crosse, WI 54601
800.362.9567, ext. 52102
rjrellis@yahoo.com
__________________________________
http://promotions.yahoo.com/new_mail
Message 10
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Emailing: stab ready for surface tape TW9 |
--> Tailwind-List message posted by: "Bob Conner" <bdconner@hotmail.com>
I don't have any trouble seeing them on Yahoo................Bob 149
From: "Jim and Donna Clement" 168x@merr.com
Subject: Tailwind-List: Emailing: stab ready for surface tape TW9
Which forum works out best for pictures. I have had a few people say they
can't see them on Yahoo.Jim CI
prefer Matronics
stabreadyforsurfacetape.jpg
Message 11
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Brian Alley's Composites Products |
--> Tailwind-List message posted by: "Luc H." <4luc@sbcglobal.net>
Jim & Rick
What is your over sized firewall dimensions and what is Ricks O&O firewall
dimensions??
Luc
--> Tailwind-List message posted by: Mcculleyja@aol.com
I regret that my oversize Tailwind needs a larger cowling than the standard
W-10 firewall dimensions, so I will have to live with my own
non-professional
cowling --unless all you larger fellows who fit too snugly in W-10's
eventually
start building O&O size Tailwinds and create a market for Brian to produce
his cowling in the larger size. Jim
Message 12
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Emailing: stab ready for surface tape TW9 |
They are great on Yahoo.
Paul
Message 13
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Emailing: stab ready for surface tape TW9 |
Seal-Send-Time: Sun, 4 Jul 2004 21:01:41 -0500
Jim, I get both and am on dial-up, little slow on both but pictures come through
just fine. I am going to try and save all these pictures on disc when I get
a little time. keep up the good work, she's looking good.
Alex
----- Original Message -----
From: Jim and Donna Clement
To: tailwind-list@matronics.com
Sent: Sunday, July 04, 2004 5:08 PM
Subject: Tailwind-List: Emailing: stab ready for surface tape TW9
Which forum works out best for pictures. I have had a few people say they
can't see them on Yahoo. Jim C I
prefer Matronics
Message 14
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Brian Alley's Composites Products |
--> Tailwind-List message posted by: Mcculleyja@aol.com
In a message dated 7/4/04 9:38:45 PM Eastern Daylight Time,
4luc@sbcglobal.net writes:
> What is your over sized firewall dimensions and what is Ricks O&O firewall
> dimensions??
> Luc
>
Message 15
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Brian Alley's Composites Products |
--> Tailwind-List message posted by: Mcculleyja@aol.com
Luc,
Width at top is 39.5 inches. Width at bottom is 37 inches. Height is 26
inches.
Jim
--> Tailwind-List message posted by: "Luc H." <4luc@sbcglobal.net>
Jim & Rick
What is your over sized firewall dimensions and what is Ricks O&O firewall
dimensions??
Luc
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|