---------------------------------------------------------- Tailwind-List Digest Archive --- Total Messages Posted Sun 07/04/04: 15 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 02:59 PM - Fw: Emailing: stab fabric TW9 (Jim and Donna Clement) 2. 03:09 PM - Emailing: stab ready for surface tape TW9 (Jim and Donna Clement) 3. 03:41 PM - Re: Emailing: stab ready for surface tape TW9 (James Connell) 4. 04:21 PM - Re: Fw: Emailing: stab fabric TW9 (Rich Ellis) 5. 05:05 PM - Re: Emailing: stab ready for surface tape TW9 (Jerry Hey) 6. 05:14 PM - Re: Fw: Emailing: stab fabric TW9 (Jim and Donna Clement) 7. 06:15 PM - Brian Alley's Composites Products (Mcculleyja@aol.com) 8. 06:15 PM - Re: Fw: Emailing: stab fabric TW9 (Rich Ellis) 9. 06:19 PM - Re: Fw: Emailing: stab fabric TW9 (Luc H.) 10. 06:22 PM - Re: Emailing: stab ready for surface tape TW9 (Bob Conner) 11. 06:38 PM - Re: Brian Alley's Composites Products (Luc H.) 12. 06:48 PM - Re: Emailing: stab ready for surface tape TW9 (IslPilot@aol.com) 13. 07:01 PM - Re: Emailing: stab ready for surface tape TW9 (Alex Frizzell) 14. 08:55 PM - Re: Brian Alley's Composites Products (Mcculleyja@aol.com) 15. 09:02 PM - Re: Brian Alley's Composites Products (Mcculleyja@aol.com) ________________________________ Message 1 _____________________________________ Time: 02:59:38 PM PST US From: "Jim and Donna Clement" <168x@merr.com> Subject: Tailwind-List: Fw: Emailing: stab fabric TW9 ----- Original Message ----- From: "Jim and Donna Clement" <168x@merr.com> Subject: Emailing: stab fabric TW9 > There is more waste this method but fabric is cheap. Jim C ________________________________ Message 2 _____________________________________ Time: 03:09:59 PM PST US From: "Jim and Donna Clement" <168x@merr.com> Subject: Tailwind-List: Emailing: stab ready for surface tape TW9 Which forum works out best for pictures. I have had a few people say they can't see them on Yahoo. Jim C I prefer Matronics ________________________________ Message 3 _____________________________________ Time: 03:41:22 PM PST US From: "James Connell" Subject: Re: Tailwind-List: Emailing: stab ready for surface tape TW9 --> Tailwind-List message posted by: "James Connell" Jim C. both work for me..great pictures..an invaluable resource for all builders, keep them coming . hope Jerry is keeping them for his upcoming on line manual. regards jim connell. ----- Original Message ----- From: Jim and Donna Clement <168x@merr.com> Subject: Tailwind-List: Emailing: stab ready for surface tape TW9 > > Which forum works out best for pictures. I have had a few people say they > can't see them on Yahoo. Jim C I > prefer Matronics > ________________________________ Message 4 _____________________________________ Time: 04:21:25 PM PST US From: Rich Ellis Subject: Re: Tailwind-List: Fw: Emailing: stab fabric TW9 --> Tailwind-List message posted by: Rich Ellis Jim, I received your photos from both Yahoo and Matronics. I would suggest that you continue to send to both forums, otherwise there will be some that can't view photos because they only get photos though one of the forums websites. Plan to be in Baraboo tomorrow morning. Looks like Clint in ready for his landing gear also. Rich --- Jim and Donna Clement <168x@merr.com> wrote: > > ----- Original Message ----- > From: "Jim and Donna Clement" <168x@merr.com> > To: > Sent: Sunday, July 04, 2004 4:49 PM > Subject: Emailing: stab fabric TW9 > > > > There is more waste this method but fabric is > cheap. Jim C > ATTACHMENT part 2 image/jpeg name=stab fabric 3.jpg > ATTACHMENT part 3 image/jpeg name=stab fabric.jpg ===== Richard L. Ellis, M.D. Gundersen Lutheran Health System Co-Director Norma J. Vinger Center for Breast Care 1900 South Avenue La Crosse, WI 54601 800.362.9567, ext. 52102 rjrellis@yahoo.com __________________________________ http://promotions.yahoo.com/new_mail ________________________________ Message 5 _____________________________________ Time: 05:05:56 PM PST US Subject: Re: Tailwind-List: Emailing: stab ready for surface tape TW9 From: Jerry Hey --> Tailwind-List message posted by: Jerry Hey Yes, every picture and comment is saved and will be on the site. Maybe (I hope) the series will continue thru painting. Jerry On Sunday, July 4, 2004, at 06:47 PM, James Connell wrote: > --> Tailwind-List message posted by: "James Connell" > > > Jim C. both work for me..great pictures..an invaluable resource for > all > builders, keep them coming . hope Jerry is keeping them for his > upcoming on > line manual. regards jim connell. > ----- Original Message ----- > From: Jim and Donna Clement <168x@merr.com> > To: > Sent: Monday, July 05, 2004 8:08 AM > Subject: Tailwind-List: Emailing: stab ready for surface tape TW9 > > >> >> Which forum works out best for pictures. I have had a few people say >> they >> can't see them on Yahoo. Jim C I >> prefer Matronics >> > > > _- > ======================================================================= > > _- > ======================================================================= > > _- > ======================================================================= > > _- > ======================================================================= > > > > ________________________________ Message 6 _____________________________________ Time: 05:14:25 PM PST US From: "Jim and Donna Clement" <168x@merr.com> Subject: Re: Tailwind-List: Fw: Emailing: stab fabric TW9 --> Tailwind-List message posted by: "Jim and Donna Clement" <168x@merr.com> Rich, It will be one or the other. For us that have dial up, it takes a long time to send and receive pictures. I prefer Matronics, shouldn't be a problem for those on the Yahoo Forum to sign up to Matronics also. Jim C ----- Original Message ----- From: "Rich Ellis" Subject: Re: Tailwind-List: Fw: Emailing: stab fabric TW9 > --> Tailwind-List message posted by: Rich Ellis > > Jim, > > I received your photos from both Yahoo and Matronics. > I would suggest that you continue to send to both > forums, otherwise there will be some that can't view > photos because they only get photos though one of the > forums websites. > > Plan to be in Baraboo tomorrow morning. Looks like > Clint in ready for his landing gear also. Rich > > --- Jim and Donna Clement <168x@merr.com> wrote: > > > > ----- Original Message ----- > > From: "Jim and Donna Clement" <168x@merr.com> > > To: > > Sent: Sunday, July 04, 2004 4:49 PM > > Subject: Emailing: stab fabric TW9 > > > > > > > There is more waste this method but fabric is > > cheap. Jim C > > > ATTACHMENT part 2 image/jpeg name=stab fabric 3.jpg > > > > ATTACHMENT part 3 image/jpeg name=stab fabric.jpg > > > ===== > Richard L. Ellis, M.D. > Gundersen Lutheran Health System > Co-Director > Norma J. Vinger Center for Breast Care > 1900 South Avenue > La Crosse, WI 54601 > 800.362.9567, ext. 52102 > rjrellis@yahoo.com > > > __________________________________ > http://promotions.yahoo.com/new_mail > > ________________________________ Message 7 _____________________________________ Time: 06:15:27 PM PST US From: Mcculleyja@aol.com Subject: Tailwind-List: Brian Alley's Composites Products 3.4 NONSENSE BODY: String of nonsense text --> Tailwind-List message posted by: Mcculleyja@aol.com A few days ago I flew my Tailwind to Summersville, W.VA to visit Brian Alley and see his fabulous facility where he is creating numerous carbon fiber products for Tailwinds while also working full time on completing a turbine powered pressurized Lancair for its owner. The pics that most on this list have seen of Brian's cowling, instrument panel, wheel pants and spinner plus backing plate show beautiful results but to see and feel the real items was a distinct pleasure. Those who get to Oshkosh will no doubt agree when you hold the items and feel the light weight and stiffness plus the finished surface leaving nothing more than priming and painting to do. He is also planning on many other products as time permits. I regret that my oversize Tailwind needs a larger cowling than the standard W-10 firewall dimensions, so I will have to live with my own non-professional cowling --unless all you larger fellows who fit too snugly in W-10's eventually start building O&O size Tailwinds and create a market for Brian to produce his cowling in the larger size. Thanks Brian for your time and the tour of your operation. My return flight home made the 200 miles in 1 hour from takeoff to landing on only 7 gallons. That's what makes all the tedious years building a Tailwind rapidly fade from the memory, to be replaced with memorable performance that spam can owners only dream about even after they spend huge sums to buy the best available. So keep building, guys & gals! Jim ________________________________ Message 8 _____________________________________ Time: 06:15:27 PM PST US From: Rich Ellis Subject: Re: Tailwind-List: Fw: Emailing: stab fabric TW9 --> Tailwind-List message posted by: Rich Ellis Jim, I assumed you had high-speed internet access. If you don't, as you indicated, go with the one you want otherwise you will be at your computer all day (and nite). Sure enjoy and learn alot from your photos, as I am sure others do also. Rich --- Jim and Donna Clement <168x@merr.com> wrote: > --> Tailwind-List message posted by: "Jim and Donna > Clement" <168x@merr.com> > > Rich, It will be one or the other. For us that have > dial up, it takes a long > time to send and receive pictures. I prefer > Matronics, shouldn't be a > problem for those on the Yahoo Forum to sign up to > Matronics also. Jim C > > ----- Original Message ----- > From: "Rich Ellis" > To: > Sent: Sunday, July 04, 2004 6:21 PM > Subject: Re: Tailwind-List: Fw: Emailing: stab > fabric TW9 > > > > --> Tailwind-List message posted by: Rich Ellis > > > > > Jim, > > > > I received your photos from both Yahoo and > Matronics. > > I would suggest that you continue to send to both > > forums, otherwise there will be some that can't > view > > photos because they only get photos though one of > the > > forums websites. > > > > Plan to be in Baraboo tomorrow morning. Looks like > > Clint in ready for his landing gear also. Rich > > > > --- Jim and Donna Clement <168x@merr.com> wrote: > > > > > > ----- Original Message ----- > > > From: "Jim and Donna Clement" <168x@merr.com> > > > To: > > > Sent: Sunday, July 04, 2004 4:49 PM > > > Subject: Emailing: stab fabric TW9 > > > > > > > > > > There is more waste this method but fabric is > > > cheap. Jim C > > > > > ATTACHMENT part 2 image/jpeg name=stab fabric > 3.jpg > > > > > > > ATTACHMENT part 3 image/jpeg name=stab > fabric.jpg > > > > > > > > ===== > > Richard L. Ellis, M.D. > > Gundersen Lutheran Health System > > Co-Director > > Norma J. Vinger Center for Breast Care > > 1900 South Avenue > > La Crosse, WI 54601 > > 800.362.9567, ext. 52102 > > rjrellis@yahoo.com > > > > > > > > __________________________________ > providers! > > http://promotions.yahoo.com/new_mail > > > > > > > > > > > > > > > > > > > > > > > > > > Contributions > any other > Forums. > > http://www.matronics.com/chat > > http://www.matronics.com/subscription > http://www.matronics.com/FAQ/Tailwind-List.htm > http://www.matronics.com/archives > http://www.matronics.com/photoshare > http://www.matronics.com/emaillists > > > > > > ===== Richard L. Ellis, M.D. Gundersen Lutheran Health System Co-Director Norma J. Vinger Center for Breast Care 1900 South Avenue La Crosse, WI 54601 800.362.9567, ext. 52102 rjrellis@yahoo.com __________________________________ http://promotions.yahoo.com/new_mail ________________________________ Message 9 _____________________________________ Time: 06:19:45 PM PST US From: "Luc H." <4luc@sbcglobal.net> Subject: Re: Tailwind-List: Fw: Emailing: stab fabric TW9 --> Tailwind-List message posted by: "Luc H." <4luc@sbcglobal.net> As most people are on both list it would be very annoying to get multiple posting of the same photo's. I have DSL and virtually no limits on size, but I don't want to pick through duplicates that arrive sometimes hours apart. Those on dial up with small storage accounts will really hate it. Both work fine as long as your not receiving daily archives. I vote for Matronics. Luc ----- Original Message ----- From: "Rich Ellis" Subject: Re: Tailwind-List: Fw: Emailing: stab fabric TW9 --> Tailwind-List message posted by: Rich Ellis Jim, I received your photos from both Yahoo and Matronics. I would suggest that you continue to send to both forums, otherwise there will be some that can't view photos because they only get photos though one of the forums websites. Plan to be in Baraboo tomorrow morning. Looks like Clint in ready for his landing gear also. Rich --- Jim and Donna Clement <168x@merr.com> wrote: > > ----- Original Message ----- > From: "Jim and Donna Clement" <168x@merr.com> > To: > Sent: Sunday, July 04, 2004 4:49 PM > Subject: Emailing: stab fabric TW9 > > > > There is more waste this method but fabric is > cheap. Jim C > ATTACHMENT part 2 image/jpeg name=stab fabric 3.jpg > ATTACHMENT part 3 image/jpeg name=stab fabric.jpg ===== Richard L. Ellis, M.D. Gundersen Lutheran Health System Co-Director Norma J. Vinger Center for Breast Care 1900 South Avenue La Crosse, WI 54601 800.362.9567, ext. 52102 rjrellis@yahoo.com __________________________________ http://promotions.yahoo.com/new_mail ________________________________ Message 10 ____________________________________ Time: 06:22:10 PM PST US From: "Bob Conner" Subject: RE: Tailwind-List: Emailing: stab ready for surface tape TW9 --> Tailwind-List message posted by: "Bob Conner" I don't have any trouble seeing them on Yahoo................Bob 149 From: "Jim and Donna Clement" 168x@merr.com Subject: Tailwind-List: Emailing: stab ready for surface tape TW9 Which forum works out best for pictures. I have had a few people say they can't see them on Yahoo.Jim CI prefer Matronics stabreadyforsurfacetape.jpg ________________________________ Message 11 ____________________________________ Time: 06:38:09 PM PST US From: "Luc H." <4luc@sbcglobal.net> Subject: Re: Tailwind-List: Brian Alley's Composites Products --> Tailwind-List message posted by: "Luc H." <4luc@sbcglobal.net> Jim & Rick What is your over sized firewall dimensions and what is Ricks O&O firewall dimensions?? Luc --> Tailwind-List message posted by: Mcculleyja@aol.com I regret that my oversize Tailwind needs a larger cowling than the standard W-10 firewall dimensions, so I will have to live with my own non-professional cowling --unless all you larger fellows who fit too snugly in W-10's eventually start building O&O size Tailwinds and create a market for Brian to produce his cowling in the larger size. Jim ________________________________ Message 12 ____________________________________ Time: 06:48:04 PM PST US From: IslPilot@aol.com Subject: Re: Tailwind-List: Emailing: stab ready for surface tape TW9 They are great on Yahoo. Paul ________________________________ Message 13 ____________________________________ Time: 07:01:55 PM PST US From: "Alex Frizzell" Subject: Re: Tailwind-List: Emailing: stab ready for surface tape TW9 Seal-Send-Time: Sun, 4 Jul 2004 21:01:41 -0500 Jim, I get both and am on dial-up, little slow on both but pictures come through just fine. I am going to try and save all these pictures on disc when I get a little time. keep up the good work, she's looking good. Alex ----- Original Message ----- From: Jim and Donna Clement To: tailwind-list@matronics.com Sent: Sunday, July 04, 2004 5:08 PM Subject: Tailwind-List: Emailing: stab ready for surface tape TW9 Which forum works out best for pictures. I have had a few people say they can't see them on Yahoo. Jim C I prefer Matronics ________________________________ Message 14 ____________________________________ Time: 08:55:32 PM PST US From: Mcculleyja@aol.com Subject: Re: Tailwind-List: Brian Alley's Composites Products --> Tailwind-List message posted by: Mcculleyja@aol.com In a message dated 7/4/04 9:38:45 PM Eastern Daylight Time, 4luc@sbcglobal.net writes: > What is your over sized firewall dimensions and what is Ricks O&O firewall > dimensions?? > Luc > ________________________________ Message 15 ____________________________________ Time: 09:02:47 PM PST US From: Mcculleyja@aol.com Subject: Re: Tailwind-List: Brian Alley's Composites Products --> Tailwind-List message posted by: Mcculleyja@aol.com Luc, Width at top is 39.5 inches. Width at bottom is 37 inches. Height is 26 inches. Jim --> Tailwind-List message posted by: "Luc H." <4luc@sbcglobal.net> Jim & Rick What is your over sized firewall dimensions and what is Ricks O&O firewall dimensions?? Luc