---------------------------------------------------------- Tailwind-List Digest Archive --- Total Messages Posted Tue 08/03/04: 11 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 03:38 AM - Re: Therapy (Malcolm.Lovelace@coopertools.com) 2. 04:27 AM - Re: George Turner Camera (George Turner) 3. 06:08 AM - Re: Baraboo (Dave Conrad) 4. 12:42 PM - Re: Baraboo (GORDON PARKER) 5. 03:17 PM - Re: Baraboo (DaveM) 6. 04:19 PM - sandblast (Paul Holmes) 7. 04:35 PM - Re: sandblast (Jim and Donna Clement) 8. 08:10 PM - N number ID (Dave Conrad) 9. 09:24 PM - Re: Baraboo (red) 10. 09:33 PM - Re: [TailwindForum] 917WT Gone (flamini2) 11. 09:40 PM - Re: Baraboo (red) ________________________________ Message 1 _____________________________________ Time: 03:38:58 AM PST US From: Malcolm.Lovelace@coopertools.com Subject: RE: Tailwind-List: Therapy --> Tailwind-List message posted by: Malcolm.Lovelace@CooperTools.com John, thanks for all the fun, I had a great time. Jim C. thanks again for a great time at Baraboo. All of us Tailwinders are blessed to have a great friend like you and Donna. I can't wait until next year. Malcolm > -----Original Message----- > From: john [SMTP:frmrjohn@netonecom.net] > Sent: Monday, August 02, 2004 10:42 PM > To: tailwind > Subject: Tailwind-List: Therapy > > --> Tailwind-List message posted by: "john" > > Thanks to the Baraboo Gang for the wonderful weekend. After helping Jim > blast the dust out of his hanger it was a fun weekend. Bob came by the > trailer about 9:00 pm and we had a short and enjoyable chat. Very sorry > to > hear of Estelles'passing, our condulences are with you. Had a great ride > in > Malcolms' W-10. Richard and I did a jungle breakfast for the guys on sat > and sunday, hope no one got to meet Sam and Elly. Thanks Danny for the > help > on the Coffee. We hope to be better prepared to do this next, as Jim has > given us his blessing. Made it home in the ole farm truck without mishap, > from Oshkosh sunday evening, Aug 1st, about 9;00 pm. Farmerjohn Don't > Archive > > > > > > > > ________________________________ Message 2 _____________________________________ Time: 04:27:56 AM PST US From: George Turner Subject: Re: Tailwind-List: George Turner Camera Dennis and others: It is very kind of you to offer to help pay for another camera, but, I do not feel right about accepting your gifts. I can replace the camera from E-bay, used, at a low price. Thanks just the same. If any have already sent money, I will use it toward the camera, and thanks. George flamini2 wrote: George let us know when to stop sending you money. Dennis Flamini N564DF race #53 Chicago --------------------------------- ________________________________ Message 3 _____________________________________ Time: 06:08:49 AM PST US Subject: Re: Tailwind-List: Baraboo From: Dave Conrad --> Tailwind-List message posted by: Dave Conrad Red, Very nice to have met you. You pay very close attention to the details and it shows on the great looking Tailwind that you have. Dave Conrad P.S. How much for a set of those exhaust pipe tips you built? I think several of the Tailwinders would be interested if you made some up. On Monday, August 2, 2004, at 11:22 PM, red wrote: > --> Tailwind-List message posted by: "red" > > Tailwinders, > Congratulations, Malcolm won an Bronze Lindy for his beautiful 81ML at > Oshkosh. > Thanks to all at Baraboo and OSH for the help and company. > To Jim for the shop use, help and supplies, to Dan for being so > helpful, to > Dave Conrad for a helping hand, to George for being social director, > to Earl > Luce for showing me how to move the rear spar carry-through without > recovering the fuselage, to Laura Luce for watching our Tailwind when > we > went sightseeing, to Jim Stanton for history and information, to > Fearless > Fred for entertainment, Donna for transport and company, and to > everyone and > anyone that I may have forgotten here. > Our condolences to Bob Danner on the loss that we all share. > Red and Marilyn > > > ----- Original Message ----- > From: > To: > Sent: Monday, August 02, 2004 1:13 PM > Subject: RE: Tailwind-List: Baraboo-My other ride > > >> --> Tailwind-List message posted by: Malcolm.Lovelace@CooperTools.com >> >> Dan, >> >> Glad you enjoyed it, now get your Tailwind in the air. I made it home >> Saturday afternoon after spending Friday night in Valpo, Ind. Let me >> know >> when you get your airplane back to the airport. I will fly down some >> Saturday. >> >> Malcolm >> >>> -----Original Message----- >>> From: Dan [SMTP:dannyjoe@insightbb.com] >>> Sent: Sunday, August 01, 2004 4:16 PM >>> To: TailwindForum@yahoogroups.com; tailwind-list@matronics.com >>> Subject: Tailwind-List: Baraboo-My other ride >>> >>> I want to thank Malcolm Lovelace also for a ride. Malcolm's award > winning >>> nose dragger doesn't have 180 H.P. but the tail dragger he is >>> building > now >>> might, he didn't say-but it ain't no slouch and what's 160 H.P. >>> chopped >>> liver? We took off and had 207 on the gps by the length of the >>> field. > I >>> don't remember if that is kts or mph but we were truckin right >>> along. I >>> noticed Malcolm fiddled with the trim 2 or 3 times and I guess he > figured >>> it was just the extra weight (lard) in there with him, but he finally >>> noticed he had left 5 degrees flaps in from take-off!! Needless to >>> say > it >>> made a difference when he got the flaps off. I might add that >>> Malcolm > and >>> Fred both fly with just the thumb and first finger. At speed all >>> that > is >>> necessary for any stick input is a slight pressure change, the kind >>> of >>> pressure change that barely changes the skin color where your fingers >>> touch the stick. I gotta have a 10 now. Tailwinds are rock solid. >>> People just don't know, they just don't know. Malcolm, thanks man, >>> for >>> the ride and for putting such a beautiful and great flying plane into > the >>> world. >>> >>> -Danny >>> >> >> >> >> >> >> >> >> >> > > > _- > ======================================================================= > > _- > ======================================================================= > > _- > ======================================================================= > > _- > ======================================================================= > > > > ________________________________ Message 4 _____________________________________ Time: 12:42:44 PM PST US From: "GORDON PARKER" Subject: Re: Tailwind-List: Baraboo Seal-Send-Time: Tue, 3 Aug 2004 11:21:39 -0700 Red and Dav M-- Did you receive your package from Arlington? I got Mine. Gordon ________________________________ Message 5 _____________________________________ Time: 03:17:39 PM PST US From: "DaveM" Subject: Re: Tailwind-List: Baraboo Thanks. I went to the awards ceremony and carried mine back in the airplane--more weight and we were slightly heavy as it was ; ) Dave ----- Original Message ----- From: GORDON PARKER To: tailwind-list@matronics.com Sent: Tuesday, August 03, 2004 11:21 AM Subject: Re: Tailwind-List: Baraboo Red and Dav M-- Did you receive your package from Arlington? I got Mine. Gordon ________________________________ Message 6 _____________________________________ Time: 04:19:40 PM PST US From: "Paul Holmes" Subject: Tailwind-List: sandblast Whats the preferred grit type and size for preparing a fuselage for priming? Glass beads? Aluminum oxide? Other? Thanks in advance. Paul Holmes, Horton, MI pholmes@wmis.net ________________________________ Message 7 _____________________________________ Time: 04:35:12 PM PST US From: "Jim and Donna Clement" <168x@merr.com> Subject: Re: Tailwind-List: sandblast Paul, I don't recall the grit number but it is about a medium and is sandblasting sand. It is $3.50 a 100# bag at the lumberyard at Portage. The sand pit is only 3 miles from Portage so it might be hard to match that price. If you try to recycle the sand you might get by with about 6-7 bags, if you let it blow everywhere it will take about 12-14. Jim ----- Original Message ----- From: Paul Holmes To: Tailwind-list Sent: Tuesday, August 03, 2004 6:18 PM Subject: Tailwind-List: sandblast Whats the preferred grit type and size for preparing a fuselage for priming? Glass beads? Aluminum oxide? Other? Thanks in advance. Paul Holmes, Horton, MI pholmes@wmis.net ________________________________ Message 8 _____________________________________ Time: 08:10:19 PM PST US Subject: Tailwind-List: N number ID From: Dave Conrad Tailwind at Yahoo --> Tailwind-List message posted by: Dave Conrad Guys, Just type in the N # in Google. you can find out in a flash who owns anything. Dave Conrad ________________________________ Message 9 _____________________________________ Time: 09:24:23 PM PST US From: "red" Subject: Re: Tailwind-List: Baraboo Gordon, I did get mine, just before we departed to B'boo. Red ----- Original Message ----- From: GORDON PARKER To: tailwind-list@matronics.com Sent: Tuesday, August 03, 2004 11:21 AM Subject: Re: Tailwind-List: Baraboo Red and Dav M-- Did you receive your package from Arlington? I got Mine. Gordon ________________________________ Message 10 ____________________________________ Time: 09:33:38 PM PST US From: "flamini2" Subject: Tailwind-List: Re: [TailwindForum] 917WT Gone Dave, Sorry to hear about the TW but so happy you are ok!! Found this photo on the net. Dennis Flamini N564DF race #53 Chicago ----- Original Message ----- From: Subject: Re: [TailwindForum] 917WT Gone > Thanks Lou, > I plan to cut inspection holes in the wings to examine the spars. Even then, I may just build new wings. > > David > > > http://us.click.yahoo.com/Z1wmxD/DREIAA/yQLSAA/1yWplB/TM > > The Tailwind Forum group site is: http://groups.yahoo.com/group/TailwindForum > > > <*> To visit your group on the web, go to: > http://groups.yahoo.com/group/TailwindForum/ > > <*> To unsubscribe from this group, send an email to: > TailwindForum-unsubscribe@yahoogroups.com > > http://docs.yahoo.com/info/terms/ > > ________________________________ Message 11 ____________________________________ Time: 09:40:49 PM PST US From: "red" Subject: Re: Tailwind-List: Baraboo --> Tailwind-List message posted by: "red" Dave, I could make some up. The ones on 374WT are mild steel, all of the trial parts are. I got some stainless to make whatever I end up with. Out of stainless, depends on what I find as the best deal on the tubing. On the mild steel, we could do it for $30pr plus shipping for some like I had on it at B'boo. Red ----- Original Message ----- From: "Dave Conrad" Subject: Re: Tailwind-List: Baraboo > --> Tailwind-List message posted by: Dave Conrad > > Red, Very nice to have met you. You pay very close attention to the > details and it shows on the great looking Tailwind that you have. Dave > Conrad > P.S. How much for a set of those exhaust pipe tips you built? I think > several of the Tailwinders would be interested if you made some up. > On Monday, August 2, 2004, at 11:22 PM, red wrote: > > > --> Tailwind-List message posted by: "red" > > > > Tailwinders, > > Congratulations, Malcolm won an Bronze Lindy for his beautiful 81ML at > > Oshkosh. > > Thanks to all at Baraboo and OSH for the help and company. > > To Jim for the shop use, help and supplies, to Dan for being so > > helpful, to > > Dave Conrad for a helping hand, to George for being social director, > > to Earl > > Luce for showing me how to move the rear spar carry-through without > > recovering the fuselage, to Laura Luce for watching our Tailwind when > > we > > went sightseeing, to Jim Stanton for history and information, to > > Fearless > > Fred for entertainment, Donna for transport and company, and to > > everyone and > > anyone that I may have forgotten here. > > Our condolences to Bob Danner on the loss that we all share. > > Red and Marilyn > > > > > > ----- Original Message ----- > > From: > > To: > > Sent: Monday, August 02, 2004 1:13 PM > > Subject: RE: Tailwind-List: Baraboo-My other ride > > > > > >> --> Tailwind-List message posted by: Malcolm.Lovelace@CooperTools.com > >> > >> Dan, > >> > >> Glad you enjoyed it, now get your Tailwind in the air. I made it home > >> Saturday afternoon after spending Friday night in Valpo, Ind. Let me > >> know > >> when you get your airplane back to the airport. I will fly down some > >> Saturday. > >> > >> Malcolm > >> > >>> -----Original Message----- > >>> From: Dan [SMTP:dannyjoe@insightbb.com] > >>> Sent: Sunday, August 01, 2004 4:16 PM > >>> To: TailwindForum@yahoogroups.com; tailwind-list@matronics.com > >>> Subject: Tailwind-List: Baraboo-My other ride > >>> > >>> I want to thank Malcolm Lovelace also for a ride. Malcolm's award > > winning > >>> nose dragger doesn't have 180 H.P. but the tail dragger he is > >>> building > > now > >>> might, he didn't say-but it ain't no slouch and what's 160 H.P. > >>> chopped > >>> liver? We took off and had 207 on the gps by the length of the > >>> field. > > I > >>> don't remember if that is kts or mph but we were truckin right > >>> along. I > >>> noticed Malcolm fiddled with the trim 2 or 3 times and I guess he > > figured > >>> it was just the extra weight (lard) in there with him, but he finally > >>> noticed he had left 5 degrees flaps in from take-off!! Needless to > >>> say > > it > >>> made a difference when he got the flaps off. I might add that > >>> Malcolm > > and > >>> Fred both fly with just the thumb and first finger. At speed all > >>> that > > is > >>> necessary for any stick input is a slight pressure change, the kind > >>> of > >>> pressure change that barely changes the skin color where your fingers > >>> touch the stick. I gotta have a 10 now. Tailwinds are rock solid. > >>> People just don't know, they just don't know. Malcolm, thanks man, > >>> for > >>> the ride and for putting such a beautiful and great flying plane into > > the > >>> world. > >>> > >>> -Danny > >>> > >> > >> > >> > >> > >> > >> > >> > >> > >> > > > > > > > > > > > > > > _- > > ======================================================================= > > > > _- > > ======================================================================= > > > > _- > > ======================================================================= > > > > _- > > ======================================================================= > > > > > > > > > > > >