---------------------------------------------------------- Tailwind-List Digest Archive --- Total Messages Posted Wed 08/11/04: 7 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 06:44 PM - Re: windshield vibration/noise (red) 2. 07:01 PM - Re: windshield vibration/noise (Rich Ellis) 3. 07:11 PM - Re: 70P (Dan Youngquist) 4. 07:32 PM - Re: windshield vibration/noise (red) 5. 08:05 PM - wing fitting (Earl Luce) 6. 09:07 PM - Re: wing fitting (Dan) 7. 09:40 PM - Re: wing fitting (Larry H) ________________________________ Message 1 _____________________________________ Time: 06:44:55 PM PST US From: "red" Subject: Re: Tailwind-List: windshield vibration/noise ----- Original Message ----- From: red To: tailwind-list@matronics.com Sent: Tuesday, August 10, 2004 9:41 PM Subject: Tailwind-List: windshield vibration/noise Tailwinders, I got some vibration isolators from MSC that I put between the diagonal tubes and the windshield and it cut some cabin noise. The MSC p/n's are 62187315 and 62006192, you need two of the first and four of the second. They are adjustable and cost 1.17ea for the first and 1.53 each for the second. You have to take the threaded washer out of one end of each of the four to expose rubber so that it "sticks" to the tube and does not hurt the windshield. Sorry that 1/2 a message went out last night. Red Hamilton ________________________________ Message 2 _____________________________________ Time: 07:01:50 PM PST US From: Rich Ellis Subject: Re: Tailwind-List: windshield vibration/noise --> Tailwind-List message posted by: Rich Ellis Red ....... What dB reduction did you get with the vibration isolators from MSC? Rich --- red wrote: > > ----- Original Message ----- > From: red > To: tailwind-list@matronics.com > Sent: Tuesday, August 10, 2004 9:41 PM > Subject: Tailwind-List: windshield vibration/noise > > > Tailwinders, > I got some vibration isolators from MSC that I put > between the diagonal tubes and the windshield and it > cut some cabin noise. The MSC p/n's are 62187315 and > 62006192, you need two of the first and four of the > second. They are adjustable and cost 1.17ea for the > first and 1.53 each for the second. You have to take > the threaded washer out of one end of each of the > four to expose rubber so that it "sticks" to the > tube and does not hurt the windshield. > Sorry that 1/2 a message went out last night. > Red Hamilton ===== Richard L. Ellis, M.D. Gundersen Lutheran Health System Co-Director Norma J. Vinger Center for Breast Care 1900 South Avenue La Crosse, WI 54601 800.362.9567, ext. 52102 rjrellis@yahoo.com __________________________________ http://promotions.yahoo.com/new_mail ________________________________ Message 3 _____________________________________ Time: 07:11:04 PM PST US From: Dan Youngquist Subject: Tailwind-List: Re: 70P --> Tailwind-List message posted by: Dan Youngquist Hi all, Yesterday at the airport I ran into some folks who are based at Whidbey Air Park, where Lou Hagler crashed his W10 on 8/1. They didn't see it happen, but a pilot friend did. She said the engine appeared to be running fine, but the plane stalled & mushed down twice on climbout before it hit the tree and crashed. Seems like he was going way too slow, the big question is why. Anyone else know any more details? -Dan ________________________________ Message 4 _____________________________________ Time: 07:32:40 PM PST US From: "red" Subject: Re: Tailwind-List: windshield vibration/noise --> Tailwind-List message posted by: "red" Rich, Not yet, should have numbers after the week end. Red ----- Original Message ----- From: "Rich Ellis" Subject: Re: Tailwind-List: windshield vibration/noise > --> Tailwind-List message posted by: Rich Ellis > > Red ....... What dB reduction did you get with the > vibration isolators from MSC? Rich > > > --- red wrote: > > > > > ----- Original Message ----- > > From: red > > To: tailwind-list@matronics.com > > Sent: Tuesday, August 10, 2004 9:41 PM > > Subject: Tailwind-List: windshield vibration/noise > > > > > > Tailwinders, > > I got some vibration isolators from MSC that I put > > between the diagonal tubes and the windshield and it > > cut some cabin noise. The MSC p/n's are 62187315 and > > 62006192, you need two of the first and four of the > > second. They are adjustable and cost 1.17ea for the > > first and 1.53 each for the second. You have to take > > the threaded washer out of one end of each of the > > four to expose rubber so that it "sticks" to the > > tube and does not hurt the windshield. > > Sorry that 1/2 a message went out last night. > > Red Hamilton > > > ===== > Richard L. Ellis, M.D. > Gundersen Lutheran Health System > Co-Director > Norma J. Vinger Center for Breast Care > 1900 South Avenue > La Crosse, WI 54601 > 800.362.9567, ext. 52102 > rjrellis@yahoo.com > > > __________________________________ > http://promotions.yahoo.com/new_mail > > ________________________________ Message 5 _____________________________________ Time: 08:05:42 PM PST US From: "Earl Luce" Subject: Tailwind-List: wing fitting Hi gang , Take a look at thae wing fitting that I'm drawing for my manual for the buttercup . It is the same as the Tailwind . I'm going to do all the parts this way . Any suggestions ? Earl Luce --- ________________________________ Message 6 _____________________________________ Time: 09:07:28 PM PST US From: "Dan" Subject: RE: Tailwind-List: wing fitting Earl, Looks great! Looks like AutoCAD Inventor. Nothing beats those computer drawings. It may help your readers if you would increase the offset in your dimension lines, and make the arrows bigger maybe. This is easy to change in regular AutoCAD -dunno about Inventor. When you are looking at the printed page it could help us squinters to make out the dimensions. -Danny -----Original Message----- From: owner-tailwind-list-server@matronics.com [mailto:owner-tailwind-list-server@matronics.com] On Behalf Of Earl Luce Subject: Tailwind-List: wing fitting Hi gang , Take a look at thae wing fitting that I'm drawing for my manual for the buttercup . It is the same as the Tailwind . I'm going to do all the parts this way . Any suggestions ? Earl Luce --- ________________________________ Message 7 _____________________________________ Time: 09:40:18 PM PST US From: "Larry H" Subject: Re: Tailwind-List: wing fitting Earl, it appears to me that the 1.43 dimension is different from the top to the bottom. The bottom appears to be from the center of the hole out to whereever and the top dimension seems to be from outer edge of the fitting to the flat surface that is 90 degrees to the attach fittings. It is late and maybe my eyes are crooked ! I agree that bigger/darker arrow ends and numbers would be great. The drawing style, look, coloring is fantastic! Larry H. ----- Original Message ----- From: Earl Luce To: tailwind-list@matronics.com Sent: Wednesday, August 11, 2004 10:06 PM Subject: Tailwind-List: wing fitting Hi gang , Take a look at thae wing fitting that I'm drawing for my manual for the buttercup . It is the same as the Tailwind . I'm going to do all the parts this way . Any suggestions ? Earl Luce