----------------------------------------------------------
                           Tailwind-List Digest Archive
                                      ---
                     Total Messages Posted Tue 08/17/04: 3
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 04:41 AM - Re: wing fitting  (Ruhnke, Mike)
     2. 04:13 PM - Re: wing fitting  (Mel Lewis)
     3. 07:23 PM - Re: wing fitting  (Earl Luce)
 
 
 
________________________________  Message 1  _____________________________________


Time: 04:41:06 AM PST US
Subject: RE: Tailwind-List: wing fitting
From: "Ruhnke, Mike" <ruhnkem@rayovac.com>

Loved working with that stuff!!!


-----Original Message-----
From: owner-tailwind-list-server@matronics.com [mailto:owner-tailwind-list-server@matronics.com]On Behalf Of Jack Steele
Subject: Re: Tailwind-List: wing fitting


Mke,  nothing wrong with FPL 16.  I used it on my wings 27 years ago and still
flying.

  Jack Steele


________________________________  Message 2  _____________________________________


Time: 04:13:13 PM PST US
From: "Mel Lewis" <mell@r-quest.com>
Subject: Re: Tailwind-List: wing fitting

Hi Earl,
Was that drawing done with SolidWorks?
-Mel-
  ----- Original Message -----
  From: Earl Luce
  To: tailwind-list@matronics.com
  Sent: Wednesday, August 11, 2004 8:06 PM
  Subject: Tailwind-List: wing fitting


  Hi gang ,
      Take a look at thae wing fitting that I'm drawing for my manual for the buttercup
. It is the same as the Tailwind . I'm going to do all the parts this
way . Any suggestions ?
  Earl Luce


  ---
  Version: 6.0.735 / Virus Database: 489 - Release Date: 8/6/2004
________________________________  Message 3  _____________________________________


Time: 07:23:24 PM PST US
From: "Earl Luce" <luceair@frontiernet.net>
Subject: Re: Tailwind-List: wing fitting

Mel ,   
    Yes on Solid Works . I am trying to get both the Tailwind and Buttercup on
it .
Earl L
  ----- Original Message -----
  From: Mel Lewis
  To: tailwind-list@matronics.com
  Sent: Tuesday, August 17, 2004 7:14 PM
  Subject: Re: Tailwind-List: wing fitting


  Hi Earl,
  Was that drawing done with SolidWorks?
  -Mel-
    ----- Original Message -----
    From: Earl Luce
    To: tailwind-list@matronics.com
    Sent: Wednesday, August 11, 2004 8:06 PM
    Subject: Tailwind-List: wing fitting


    Hi gang ,
        Take a look at thae wing fitting that I'm drawing for my manual for the
buttercup . It is the same as the Tailwind . I'm going to do all the parts this
way . Any suggestions ?
    Earl Luce


    ---
    Version: 6.0.735 / Virus Database: 489 - Release Date: 8/6/2004