---------------------------------------------------------- Tailwind-List Digest Archive --- Total Messages Posted Fri 09/24/04: 16 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:45 AM - HVLP (Paul Holmes) 2. 04:46 AM - Re: Tailwind W 10R (Bob Conner) 3. 06:35 AM - Re: BMW's? (mytyweav@earthlink.net) 4. 07:46 AM - Re: Tailwind W 10R (Bob Conner) 5. 08:18 AM - Re: Tailwind W 10R (Ruhnke, Mike) 6. 08:57 AM - Re: Tailwind W 10R (Dan) 7. 09:26 AM - Re: Tailwind W 10R (Luc H.) 8. 09:39 AM - Tailwind W10R (Jim and Donna Clement) 9. 12:42 PM - Re: Tailwind W10R (Bob Conner) 10. 02:05 PM - Re: Tailwind W10R (Jim and Donna Clement) 11. 02:39 PM - Re: Re: BMW's? (Estelle Danner) 12. 03:03 PM - Re: Tailwind W 10R (Joe Maj) 13. 04:42 PM - Re: Re: BMW's? (Richard) 14. 05:27 PM - Re: Re: BMW's? (Estelle Danner) 15. 06:00 PM - Re: Re: BMW's? (Bill newkirk) 16. 09:55 PM - Re: Re: BMW's? (mytyweav@earthlink.net) ________________________________ Message 1 _____________________________________ Time: 04:45:47 AM PST US From: "Paul Holmes" Subject: Tailwind-List: HVLP Earl and Jerry, The airbrush sounds like a good way to get into all the corners on the structure and save a lot of material. Paul pholmes@wmis.net ________________________________ Message 2 _____________________________________ Time: 04:46:04 AM PST US From: "Bob Conner" Subject: RE: Tailwind-List: Tailwind W 10R --> Tailwind-List message posted by: "Bob Conner" George I believe you need a lot more practice....................Bob 149 do not archive From: George Turner tailwind222@yahoo.com Subject: Tailwind-List: Tailwind W 10R Check this out. --------------------------------- vote.yahoo.com - Register online to vote today! W10-R.jpg ________________________________ Message 3 _____________________________________ Time: 06:35:27 AM PST US From: "mytyweav@earthlink.net" Subject: Tailwind-List: Re: BMW's? --> Tailwind-List message posted by: "mytyweav@earthlink.net" Alright!! Sounds like we can go do some riding.. I have an 2000 RT100 in Graphite...but I don't have heated grips yet. Weav Original Message: ----------------- From: Bill newkirk bilnewkirk@msn.com Subject: Re: Tailwind-List: Fw: Emailing:staying on top Bob Danner What model BMW do you have? I have an RT1150. Sun. morning it was cold enough in our California mountains to plug in the electric vest. Bill Newkirk, Prather, CA ----- Original Message ----- From: Estelle Danner To: tailwind-list@matronics.com Sent: Wednesday, September 22, 2004 5:30 AM Subject: Re: Tailwind-List: Fw: Emailing:staying on top --> Tailwind-List message posted by: "Estelle Danner" > Hey Fred i know that heater is hot ! i think it could burn the hair of you leg or melt the the rubber on your tennys a little off subject on mon. i went to duluth minn. on the bmw cycle i got some new riding gear at aerostich its the the last day of summer so i needed some gear that i can plug in and get some heat on the old body . i was going to go to the richard bong museum at superior. but time was getting late when the sun goes down the deer come out . 700 mile round trip great ride on the bike . fall color are just starting to turn in the north .im getting back in to things ok we have to finnish rich ellis engine mount todday and do clints on sat. there is allways something to do at the baraboo airport . big picnic last weekend at the airport great food and lots of good people well i got to go im going to hook my heater back up to i took it of this summer when i had to reweld my exhaust pipes nasty trying to weld the pipes after they have been ceriamic coated ugly weld looks ok now tho see ya bob danner ----- Original Message ----- From: "Fred Weaver" > To: > Sent: Tuesday, September 21, 2004 10:21 PM Subject: Re: Tailwind-List: Fw: Emailing:staying on top > --> Tailwind-List message posted by: "Fred Weaver" > > > Yeeeeehaaaaaa...... > Reminds me of a trip that "Terrible Tailwheel Ted" and I took to Baraboo.... > 18,000 ft, sniffing the O2, Cruizin' along at a lot of MPH(Well over 225), > sipping 7.6 GPH....but didn't have an opportunity to take a picture of the > instrument panel...Too busy taking pictures of Montana... Sure was cold, > until the heater valve stuck open... Then we gently fried until we could > get on the ground in North Dakota... Gwinner.. Yep Red, it was > Gwinner, ND...non stop from Bonners Ferry, Idaho in 4 hours flat.. > > Since then, the Cabin Heat Valve has been secured in the "CLOSED" > position.... :) I might change it this winter. hahahhaa..... > Weav > ----- Original Message ----- > From: "Jim and Donna Clement" <168x@merr.com> > To: > > Sent: Tuesday, September 21, 2004 7:48 AM > Subject: Tailwind-List: Fw: Emailing:staying on top > > > > > > ----- Original Message ----- > > From: "Jim and Donna Clement" <168x@merr.com> > > To: > > > Sent: Tuesday, September 21, 2004 9:43 AM > > Subject: Emailing:staying on top > > > > > > > George, top this. Somewhere between Baraboo and Salome AZ. Slightly > > broken. > > > Jim C > > > > > > > > > > > > > > > ================================================ ================================================ http://www.matronics.com/chat ================================================ tailwind-list@matronics.com http://www.matronics.com/subscription http://www.matronics.com/FAQ/Tailwind-List.htm http://www.matronics.com/search http://www.matronics.com/browse/tailwind-list http://www.matronics.com/digest/tailwind-list http://www.matronics.com/chat http://www.matronics.com/archives http://www.matronics.com/photoshare http://www.matronics.com/tailwind-list http://www.matronics.com/emaillists report> http://www.matronics.com/contribution ================================================ ________________________________ Message 4 _____________________________________ Time: 07:46:59 AM PST US From: "Bob Conner" Subject: RE: Tailwind-List: Tailwind W 10R George I like this one better. I bet Weav will too...................Bob 149 do not archive From: George Turner tailwind222@yahoo.com Subject: Tailwind-List: Tailwind W 10R Check this out. --------------------------------- vote.yahoo.com - Register online to vote today! W10-R.jpg ________________________________ Message 5 _____________________________________ Time: 08:18:01 AM PST US Subject: RE: Tailwind-List: Tailwind W 10R From: "Ruhnke, Mike" New back ground for my PC, yippie!!! What is the mph increase witht that configuration? Weaver you signed up to test fly? do not archive. -----Original Message----- From: owner-tailwind-list-server@matronics.com [mailto:owner-tailwind-list-server@matronics.com]On Behalf Of Bob Conner Subject: RE: Tailwind-List: Tailwind W 10R George I like this one better. I bet Weav will too...................Bob 149 do not archive >From: George Turner >Reply-To: tailwind-list@matronics.com >To: tailwind-list@matronics.com >Subject: Tailwind-List: Tailwind W 10R >Date: Thu, 23 Sep 2004 20:07:55 -0700 (PDT) > >Check this out. > > >--------------------------------- >vote.yahoo.com - Register online to vote today! ><< W10-R.jpg >> ________________________________ Message 6 _____________________________________ Time: 08:57:42 AM PST US From: "Dan" Subject: RE: Tailwind-List: Tailwind W 10R Don't need those pesky struts do we? -Danny -----Original Message----- From: owner-tailwind-list-server@matronics.com [mailto:owner-tailwind-list-server@matronics.com] On Behalf Of Bob Conner Subject: RE: Tailwind-List: Tailwind W 10R George I like this one better. I bet Weav will too...................Bob 149 do not archive >From: George Turner >Reply-To: tailwind-list@matronics.com >To: tailwind-list@matronics.com >Subject: Tailwind-List: Tailwind W 10R >Date: Thu, 23 Sep 2004 20:07:55 -0700 (PDT) > >Check this out. > > >--------------------------------- >vote.yahoo.com - Register online to vote today! ><< W10-R.jpg >> ________________________________ Message 7 _____________________________________ Time: 09:26:06 AM PST US From: "Luc H." <4luc@sbcglobal.net> Subject: Re: Tailwind-List: Tailwind W 10R Bob Good job on the crop. That photo was taken from a 172 at full throttle, Fred had to throttle back and hold a nose up attitude to stay next to us for that photo. We had taken off 15min before Fred that day, it took him less than 5min to intercept us with a climbing roll and then he flew around us like we were parked. Luc ----- Original Message ----- From: Bob Conner To: tailwind-list@matronics.com Sent: Friday, September 24, 2004 7:40 AM Subject: RE: Tailwind-List: Tailwind W 10R George I like this one better. I bet Weav will too...................Bob 149 do not archive >From: George Turner >Reply-To: tailwind-list@matronics.com >To: tailwind-list@matronics.com >Subject: Tailwind-List: Tailwind W 10R >Date: Thu, 23 Sep 2004 20:07:55 -0700 (PDT) > >Check this out. > > >--------------------------------- >vote.yahoo.com - Register online to vote today! ><< W10-R.jpg >> ________________________________ Message 8 _____________________________________ Time: 09:39:43 AM PST US From: "Jim and Donna Clement" <168x@merr.com> Subject: Tailwind-List: Tailwind W10R --> Tailwind-List message posted by: "Jim and Donna Clement" <168x@merr.com> Bob, Good job but do something with the tailwheel. Jim ________________________________ Message 9 _____________________________________ Time: 12:42:00 PM PST US From: "Bob Conner" Subject: RE: Tailwind-List: Tailwind W10R --> Tailwind-List message posted by: "Bob Conner" If I got rid of the taiwheel they would lose their rudder trim.................Bob 149 do not archive From: "Jim and Donna Clement" 168x@merr.com Subject: Tailwind-List: Tailwind W10R -- Tailwind-List message posted by: "Jim and Donna Clement" 168x@merr.com Bob,Good job but do something with the tailwheel.Jim ________________________________ Message 10 ____________________________________ Time: 02:05:41 PM PST US From: "Jim and Donna Clement" <168x@merr.com> Subject: Re: Tailwind-List: Tailwind W10R Good thinking. ----- Original Message ----- From: Bob Conner To: tailwind-list@matronics.com Sent: Friday, September 24, 2004 2:37 PM Subject: RE: Tailwind-List: Tailwind W10R --> Tailwind-List message posted by: "Bob Conner" If I got rid of the taiwheel they would lose their rudder trim.................Bob 149 do not archive >From: "Jim and Donna Clement" <168x@merr.com> >Reply-To: tailwind-list@matronics.com >To: >Subject: Tailwind-List: Tailwind W10R >Date: Fri, 24 Sep 2004 11:39:08 -0500 > >--> Tailwind-List message posted by: "Jim and Donna Clement" ><168x@merr.com> > >Bob, Good job but do something with the tailwheel. Jim > > > > > > > > > Matronics Forums. http://www.matronics.com/contribution ________________________________ Message 11 ____________________________________ Time: 02:39:28 PM PST US From: "Estelle Danner" Subject: Re: Tailwind-List: Re: BMW's? --> Tailwind-List message posted by: "Estelle Danner" hey cool you got to have them heated grips Fred. when you stop to take a wizz nothing is better than a warm pair of hands Bob ----- Original Message ----- From: Subject: Tailwind-List: Re: BMW's? > --> Tailwind-List message posted by: "mytyweav@earthlink.net" > > Alright!! Sounds like we can go do some riding.. I have an 2000 RT100 in > Graphite...but I don't have heated grips yet. > Weav > > > Original Message: > ----------------- > From: Bill newkirk bilnewkirk@msn.com > Date: Thu, 23 Sep 2004 21:16:35 -0700 > To: tailwind-list@matronics.com > Subject: Re: Tailwind-List: Fw: Emailing:staying on top > > > Bob Danner > What model BMW do you have? I have an RT1150. Sun. morning it was cold > enough in our California mountains to plug in the electric vest. > > Bill Newkirk, > Prather, CA > ----- Original Message ----- > From: Estelle Danner > To: tailwind-list@matronics.com > Sent: Wednesday, September 22, 2004 5:30 AM > Subject: Re: Tailwind-List: Fw: Emailing:staying on top > > > --> Tailwind-List message posted by: "Estelle Danner" > > > > Hey Fred i know that heater is hot ! i think it could burn the hair of you > leg or melt the the rubber on your tennys > a little off subject on mon. i went to duluth minn. on the bmw cycle i > got > some new riding gear at aerostich its the the last day of summer so i > needed > some gear that i can plug in and get some heat on the old body . i was > going > to go to the richard bong museum at superior. but time was getting late > when > the sun goes down the deer come out . 700 mile round trip great ride on > the > bike . fall color are just starting to turn in the north .im getting back > in > to things ok we have to finnish rich ellis engine mount todday and do > clints > on sat. there is allways something to do at the baraboo airport . big > picnic last weekend at the airport great food and lots of good people well > i got to go im going to hook my heater back up to i took it of this summer > when i had to reweld my exhaust pipes nasty trying to weld the pipes after > they have been ceriamic coated ugly weld looks ok now tho see ya bob > danner > ----- Original Message ----- > From: "Fred Weaver" > > > To: > > Sent: Tuesday, September 21, 2004 10:21 PM > Subject: Re: Tailwind-List: Fw: Emailing:staying on top > > > > --> Tailwind-List message posted by: "Fred Weaver" > > > > > > Yeeeeehaaaaaa...... > > Reminds me of a trip that "Terrible Tailwheel Ted" and I took to > Baraboo.... > > 18,000 ft, sniffing the O2, Cruizin' along at a lot of MPH(Well over > 225), > > sipping 7.6 GPH....but didn't have an opportunity to take a picture of > the > > instrument panel...Too busy taking pictures of Montana... Sure was > cold, > > until the heater valve stuck open... Then we gently fried until we > could > > get on the ground in North Dakota... Gwinner.. Yep Red, it was > > Gwinner, ND...non stop from Bonners Ferry, Idaho in 4 hours flat.. > > > > Since then, the Cabin Heat Valve has been secured in the "CLOSED" > > position.... :) I might change it this winter. hahahhaa..... > > Weav > > ----- Original Message ----- > > From: "Jim and Donna Clement" <168x@merr.com> > > To: > > > Sent: Tuesday, September 21, 2004 7:48 AM > > Subject: Tailwind-List: Fw: Emailing:staying on top > > > > > > > > > > ----- Original Message ----- > > > From: "Jim and Donna Clement" <168x@merr.com> > > > To: > > > > Sent: Tuesday, September 21, 2004 9:43 AM > > > Subject: Emailing:staying on top > > > > > > > > > > George, top this. Somewhere between Baraboo and Salome AZ. Slightly > > > broken. > > > > Jim C > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ================================================ > ================================================ > http://www.matronics.com/chat > ================================================ > tailwind-list@matronics.com > http://www.matronics.com/subscription > http://www.matronics.com/FAQ/Tailwind-List.htm Tailwind-List.htm> > http://www.matronics.com/search > http://www.matronics.com/browse/tailwind-list e/tailwind-list> > http://www.matronics.com/digest/tailwind-list t/tailwind-list> > http://www.matronics.com/chat > http://www.matronics.com/archives > http://www.matronics.com/photoshare > http://www.matronics.com/tailwind-list t> > http://www.matronics.com/emaillists > report> > http://www.matronics.com/contribution > ================================================ > > ________________________________ Message 12 ____________________________________ Time: 03:03:21 PM PST US d="scan'208"; a="342849381:sNHT14645324" From: "Joe Maj" Subject: Re: Tailwind-List: Tailwind W 10R --> Tailwind-List message posted by: "Joe Maj" Ever see the television ad for the arthritis drug with Eric Lindbergh and the Lancair he flew NYP? Plane zooming hither and yon... but wait somethings missing... the (fixed) landing gear. ----- Original Message ----- From: "James E. Wagner Jr." Subject: Re: Tailwind-List: Tailwind W 10R > --> Tailwind-List message posted by: "James E. Wagner Jr." > > I think C B S might want to use that pic. Wags > > > ----- Original Message ----- > From: > To: > Sent: Thursday, September 23, 2004 10:21 PM > Subject: RE: Tailwind-List: Tailwind W 10R > > > > --> Tailwind-List message posted by: "mytyweav@earthlink.net" > > > > > > > > you know George...... It was a nice plane.. and this shot proves it. > > We are checking validity from now on........... > > Weav > > Original Message: > > ----------------- > > From: George Turner tailwind222@yahoo.com > > Date: Thu, 23 Sep 2004 20:07:55 -0700 (PDT) > > To: tailwind-list@matronics.com > > Subject: Tailwind-List: Tailwind W 10R > > > > > > Check this out. > > > > > > --------------------------------- > > vote.yahoo.com - Register online to vote today! > > > > > > > > > > > > > > > > > > > > > > > > > > ________________________________ Message 13 ____________________________________ Time: 04:42:59 PM PST US From: "Richard" Subject: Re: Tailwind-List: Re: BMW's? --> Tailwind-List message posted by: "Richard" I'm hanging out with the right people. I am DONE riding a motorcycle in the cold. (Idaho in March) I should scan some pictures of the outfits I used to wear... ----- Original Message ----- From: Subject: Tailwind-List: Re: BMW's? > --> Tailwind-List message posted by: "mytyweav@earthlink.net" > > Alright!! Sounds like we can go do some riding.. I have an 2000 RT100 in > Graphite...but I don't have heated grips yet. > Weav > > > Original Message: > ----------------- > From: Bill newkirk bilnewkirk@msn.com > Date: Thu, 23 Sep 2004 21:16:35 -0700 > To: tailwind-list@matronics.com > Subject: Re: Tailwind-List: Fw: Emailing:staying on top > > > Bob Danner > What model BMW do you have? I have an RT1150. Sun. morning it was cold > enough in our California mountains to plug in the electric vest. > > Bill Newkirk, > Prather, CA > ----- Original Message ----- > From: Estelle Danner > To: tailwind-list@matronics.com > Sent: Wednesday, September 22, 2004 5:30 AM > Subject: Re: Tailwind-List: Fw: Emailing:staying on top > > > --> Tailwind-List message posted by: "Estelle Danner" > > > > Hey Fred i know that heater is hot ! i think it could burn the hair of you > leg or melt the the rubber on your tennys > a little off subject on mon. i went to duluth minn. on the bmw cycle i > got > some new riding gear at aerostich its the the last day of summer so i > needed > some gear that i can plug in and get some heat on the old body . i was > going > to go to the richard bong museum at superior. but time was getting late > when > the sun goes down the deer come out . 700 mile round trip great ride on > the > bike . fall color are just starting to turn in the north .im getting back > in > to things ok we have to finnish rich ellis engine mount todday and do > clints > on sat. there is allways something to do at the baraboo airport . big > picnic last weekend at the airport great food and lots of good people well > i got to go im going to hook my heater back up to i took it of this summer > when i had to reweld my exhaust pipes nasty trying to weld the pipes after > they have been ceriamic coated ugly weld looks ok now tho see ya bob > danner > ----- Original Message ----- > From: "Fred Weaver" > > > To: > > Sent: Tuesday, September 21, 2004 10:21 PM > Subject: Re: Tailwind-List: Fw: Emailing:staying on top > > > > --> Tailwind-List message posted by: "Fred Weaver" > > > > > > Yeeeeehaaaaaa...... > > Reminds me of a trip that "Terrible Tailwheel Ted" and I took to > Baraboo.... > > 18,000 ft, sniffing the O2, Cruizin' along at a lot of MPH(Well over > 225), > > sipping 7.6 GPH....but didn't have an opportunity to take a picture of > the > > instrument panel...Too busy taking pictures of Montana... Sure was > cold, > > until the heater valve stuck open... Then we gently fried until we > could > > get on the ground in North Dakota... Gwinner.. Yep Red, it was > > Gwinner, ND...non stop from Bonners Ferry, Idaho in 4 hours flat.. > > > > Since then, the Cabin Heat Valve has been secured in the "CLOSED" > > position.... :) I might change it this winter. hahahhaa..... > > Weav > > ----- Original Message ----- > > From: "Jim and Donna Clement" <168x@merr.com> > > To: > > > Sent: Tuesday, September 21, 2004 7:48 AM > > Subject: Tailwind-List: Fw: Emailing:staying on top > > > > > > > > > > ----- Original Message ----- > > > From: "Jim and Donna Clement" <168x@merr.com> > > > To: > > > > Sent: Tuesday, September 21, 2004 9:43 AM > > > Subject: Emailing:staying on top > > > > > > > > > > George, top this. Somewhere between Baraboo and Salome AZ. Slightly > > > broken. > > > > Jim C > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ================================================ > ================================================ > http://www.matronics.com/chat > ================================================ > tailwind-list@matronics.com > http://www.matronics.com/subscription > http://www.matronics.com/FAQ/Tailwind-List.htm Tailwind-List.htm> > http://www.matronics.com/search > http://www.matronics.com/browse/tailwind-list e/tailwind-list> > http://www.matronics.com/digest/tailwind-list t/tailwind-list> > http://www.matronics.com/chat > http://www.matronics.com/archives > http://www.matronics.com/photoshare > http://www.matronics.com/tailwind-list t> > http://www.matronics.com/emaillists > report> > http://www.matronics.com/contribution > ================================================ > > ________________________________ Message 14 ____________________________________ Time: 05:27:40 PM PST US From: "Estelle Danner" Subject: Re: Tailwind-List: Re: BMW's? --> Tailwind-List message posted by: "Estelle Danner" I hear you Richard im all done freezzing my butt off . i got the riding gear from aerostich they have a great catalog 1800-222-1994 a bit priceeee but what the heck if you are comfortable got to ride got to fly what else is there ? no heat on the old 68 thats 6 volt system cant even use the turn signals on that old crapper and the battery goes dead Bob ----- Original Message ----- From: "Richard" Subject: Re: Tailwind-List: Re: BMW's? > --> Tailwind-List message posted by: "Richard" > > I'm hanging out with the right people. > > I am DONE riding a motorcycle in the cold. (Idaho in March) > > I should scan some pictures of the outfits I used to wear... > ----- Original Message ----- > From: > To: > Sent: Friday, September 24, 2004 9:35 AM > Subject: Tailwind-List: Re: BMW's? > > > > --> Tailwind-List message posted by: "mytyweav@earthlink.net" > > > > > Alright!! Sounds like we can go do some riding.. I have an 2000 RT100 > in > > Graphite...but I don't have heated grips yet. > > Weav > > > > > > Original Message: > > ----------------- > > From: Bill newkirk bilnewkirk@msn.com > > Date: Thu, 23 Sep 2004 21:16:35 -0700 > > To: tailwind-list@matronics.com > > Subject: Re: Tailwind-List: Fw: Emailing:staying on top > > > > > > Bob Danner > > What model BMW do you have? I have an RT1150. Sun. morning it was cold > > enough in our California mountains to plug in the electric vest. > > > > Bill Newkirk, > > Prather, CA > > ----- Original Message ----- > > From: Estelle Danner > > To: tailwind-list@matronics.com > > Sent: Wednesday, September 22, 2004 5:30 AM > > Subject: Re: Tailwind-List: Fw: Emailing:staying on top > > > > > > --> Tailwind-List message posted by: "Estelle Danner" > > > > > > > Hey Fred i know that heater is hot ! i think it could burn the hair of > you > > leg or melt the the rubber on your tennys > > a little off subject on mon. i went to duluth minn. on the bmw cycle i > > got > > some new riding gear at aerostich its the the last day of summer so i > > needed > > some gear that i can plug in and get some heat on the old body . i was > > going > > to go to the richard bong museum at superior. but time was getting late > > when > > the sun goes down the deer come out . 700 mile round trip great ride on > > the > > bike . fall color are just starting to turn in the north .im getting > back > > in > > to things ok we have to finnish rich ellis engine mount todday and do > > clints > > on sat. there is allways something to do at the baraboo airport . big > > picnic last weekend at the airport great food and lots of good people > well > > i got to go im going to hook my heater back up to i took it of this > summer > > when i had to reweld my exhaust pipes nasty trying to weld the pipes > after > > they have been ceriamic coated ugly weld looks ok now tho see ya bob > > danner > > ----- Original Message ----- > > From: "Fred Weaver" > > > > > To: > > > Sent: Tuesday, September 21, 2004 10:21 PM > > Subject: Re: Tailwind-List: Fw: Emailing:staying on top > > > > > > > --> Tailwind-List message posted by: "Fred Weaver" > > > > > > > > > Yeeeeehaaaaaa...... > > > Reminds me of a trip that "Terrible Tailwheel Ted" and I took to > > Baraboo.... > > > 18,000 ft, sniffing the O2, Cruizin' along at a lot of MPH(Well over > > 225), > > > sipping 7.6 GPH....but didn't have an opportunity to take a picture of > > the > > > instrument panel...Too busy taking pictures of Montana... Sure was > > cold, > > > until the heater valve stuck open... Then we gently fried until we > > could > > > get on the ground in North Dakota... Gwinner.. Yep Red, it was > > > Gwinner, ND...non stop from Bonners Ferry, Idaho in 4 hours flat.. > > > > > > Since then, the Cabin Heat Valve has been secured in the "CLOSED" > > > position.... :) I might change it this winter. hahahhaa..... > > > Weav > > > ----- Original Message ----- > > > From: "Jim and Donna Clement" <168x@merr.com> > > > To: > > > > Sent: Tuesday, September 21, 2004 7:48 AM > > > Subject: Tailwind-List: Fw: Emailing:staying on top > > > > > > > > > > > > > > ----- Original Message ----- > > > > From: "Jim and Donna Clement" <168x@merr.com> > > > > To: > > > > > > Sent: Tuesday, September 21, 2004 9:43 AM > > > > Subject: Emailing:staying on top > > > > > > > > > > > > > George, top this. Somewhere between Baraboo and Salome AZ. > Slightly > > > > broken. > > > > > Jim C > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ================================================ > > ================================================ > > http://www.matronics.com/chat > > ================================================ > > tailwind-list@matronics.com > > > http://www.matronics.com/subscription > > > http://www.matronics.com/FAQ/Tailwind-List.htm > Tailwind-List.htm> > > http://www.matronics.com/search > > > http://www.matronics.com/browse/tailwind-list > e/tailwind-list> > > > http://www.matronics.com/digest/tailwind-list > t/tailwind-list> > > http://www.matronics.com/chat > > http://www.matronics.com/archives > > http://www.matronics.com/photoshare > > > http://www.matronics.com/tailwind-list > t> > > http://www.matronics.com/emaillists > > report> > > > http://www.matronics.com/contribution > > ================================================ > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ________________________________ Message 15 ____________________________________ Time: 06:00:28 PM PST US From: "Bill newkirk" Subject: Re: Tailwind-List: Re: BMW's? Seal-Send-Time: Fri, 24 Sep 2004 17:53:20 -0700 Weav; My wife and I will be riding thru Jackson this Sunday morning - noonish. Bill Newkirk ----- Original Message ----- From: mytyweav@earthlink.net To: tailwind-list@matronics.com Sent: Friday, September 24, 2004 6:35 AM Subject: Tailwind-List: Re: BMW's? --> Tailwind-List message posted by: "mytyweav@earthlink.net" > Alright!! Sounds like we can go do some riding.. I have an 2000 RT100 in Graphite...but I don't have heated grips yet. Weav Original Message: ----------------- From: Bill newkirk bilnewkirk@msn.com Date: Thu, 23 Sep 2004 21:16:35 -0700 To: tailwind-list@matronics.com Subject: Re: Tailwind-List: Fw: Emailing:staying on top Bob Danner What model BMW do you have? I have an RT1150. Sun. morning it was cold enough in our California mountains to plug in the electric vest. Bill Newkirk, Prather, CA ----- Original Message ----- From: Estelle Danner> To: tailwind-list@matronics.com> Sent: Wednesday, September 22, 2004 5:30 AM Subject: Re: Tailwind-List: Fw: Emailing:staying on top --> Tailwind-List message posted by: "Estelle Danner" >> Hey Fred i know that heater is hot ! i think it could burn the hair of you leg or melt the the rubber on your tennys a little off subject on mon. i went to duluth minn. on the bmw cycle i got some new riding gear at aerostich its the the last day of summer so i needed some gear that i can plug in and get some heat on the old body . i was going to go to the richard bong museum at superior. but time was getting late when the sun goes down the deer come out . 700 mile round trip great ride on the bike . fall color are just starting to turn in the north .im getting back in to things ok we have to finnish rich ellis engine mount todday and do clints on sat. there is allways something to do at the baraboo airport . big picnic last weekend at the airport great food and lots of good people well i got to go im going to hook my heater back up to i took it of this summer when i had to reweld my exhaust pipes nasty trying to weld the pipes after they have been ceriamic coated ugly weld looks ok now tho see ya bob danner ----- Original Message ----- From: "Fred Weaver" >> To: >> Sent: Tuesday, September 21, 2004 10:21 PM Subject: Re: Tailwind-List: Fw: Emailing:staying on top > --> Tailwind-List message posted by: "Fred Weaver" >> > > Yeeeeehaaaaaa...... > Reminds me of a trip that "Terrible Tailwheel Ted" and I took to Baraboo.... > 18,000 ft, sniffing the O2, Cruizin' along at a lot of MPH(Well over 225), > sipping 7.6 GPH....but didn't have an opportunity to take a picture of the > instrument panel...Too busy taking pictures of Montana... Sure was cold, > until the heater valve stuck open... Then we gently fried until we could > get on the ground in North Dakota... Gwinner.. Yep Red, it was > Gwinner, ND...non stop from Bonners Ferry, Idaho in 4 hours flat.. > > Since then, the Cabin Heat Valve has been secured in the "CLOSED" > position.... :) I might change it this winter. hahahhaa..... > Weav > ----- Original Message ----- > From: "Jim and Donna Clement" <168x@merr.com>> > To: >> > Sent: Tuesday, September 21, 2004 7:48 AM > Subject: Tailwind-List: Fw: Emailing:staying on top > > > > > > ----- Original Message ----- > > From: "Jim and Donna Clement" <168x@merr.com>> > > To: >> > > Sent: Tuesday, September 21, 2004 9:43 AM > > Subject: Emailing:staying on top > > > > > > > George, top this. Somewhere between Baraboo and Salome AZ. Slightly > > broken. > > > Jim C > > > > > > > > > > > > > > > http://www.matronics.com/chat> tailwind-list@matronics.com> http://www.matronics.com/subscription> http://www.matronics.com/FAQ/Tailwind-List.htm Tailwind-List.htm> http://www.matronics.com/search> http://www.matronics.com/browse/tailwind-list e/tailwind-list> http://www.matronics.com/digest/tailwind-list t/tailwind-list> http://www.matronics.com/chat> http://www.matronics.com/archives> http://www.matronics.com/photoshare> http://www.matronics.com/tailwind-list t> http://www.matronics.com/emaillists> report> http://www.matronics.com/contribution> http://www.matronics.com/chat tailwind-list@matronics.com http://www.matronics.com/subscription http://www.matronics.com/FAQ/Tailwind-List.htm http://www.matronics.com/search http://www.matronics.com/browse/tailwind-list http://www.matronics.com/digest/tailwind-list http://www.matronics.com/chat http://www.matronics.com/archives http://www.matronics.com/photoshare http://www.matronics.com/tailwind-list http://www.matronics.com/emaillists report> http://www.matronics.com/contribution ________________________________ Message 16 ____________________________________ Time: 09:55:58 PM PST US From: "mytyweav@earthlink.net" Subject: Re: Tailwind-List: Re: BMW's? --> Tailwind-List message posted by: "mytyweav@earthlink.net" Stop by the airport... I just "Might" be back. I'm still in Texas now but leaving in the morning. I hope to put about 12 hours on the Rans tomorrow. If only the weather will cooperate. Weav Original Message: ----------------- From: Bill newkirk bilnewkirk@msn.com Subject: Re: Tailwind-List: Re: BMW's? Weav; My wife and I will be riding thru Jackson this Sunday morning - noonish. Bill Newkirk ----- Original Message ----- From: mytyweav@earthlink.net To: tailwind-list@matronics.com Sent: Friday, September 24, 2004 6:35 AM Subject: Tailwind-List: Re: BMW's? --> Tailwind-List message posted by: "mytyweav@earthlink.net" > Alright!! Sounds like we can go do some riding.. I have an 2000 RT100 in Graphite...but I don't have heated grips yet. Weav Original Message: ----------------- From: Bill newkirk bilnewkirk@msn.com Date: Thu, 23 Sep 2004 21:16:35 -0700 To: tailwind-list@matronics.com Subject: Re: Tailwind-List: Fw: Emailing:staying on top Bob Danner What model BMW do you have? I have an RT1150. Sun. morning it was cold enough in our California mountains to plug in the electric vest. Bill Newkirk, Prather, CA ----- Original Message ----- From: Estelle Danner> To: tailwind-list@matronics.com> Sent: Wednesday, September 22, 2004 5:30 AM Subject: Re: Tailwind-List: Fw: Emailing:staying on top --> Tailwind-List message posted by: "Estelle Danner" >> Hey Fred i know that heater is hot ! i think it could burn the hair of you leg or melt the the rubber on your tennys a little off subject on mon. i went to duluth minn. on the bmw cycle i got some new riding gear at aerostich its the the last day of summer so i needed some gear that i can plug in and get some heat on the old body . i was going to go to the richard bong museum at superior. but time was getting late when the sun goes down the deer come out . 700 mile round trip great ride on the bike . fall color are just starting to turn in the north .im getting back in to things ok we have to finnish rich ellis engine mount todday and do clints on sat. there is allways something to do at the baraboo airport . big picnic last weekend at the airport great food and lots of good people well i got to go im going to hook my heater back up to i took it of this summer when i had to reweld my exhaust pipes nasty trying to weld the pipes after they have been ceriamic coated ugly weld looks ok now tho see ya bob danner ----- Original Message ----- From: "Fred Weaver" >> To: >> Sent: Tuesday, September 21, 2004 10:21 PM Subject: Re: Tailwind-List: Fw: Emailing:staying on top > --> Tailwind-List message posted by: "Fred Weaver" >> > > Yeeeeehaaaaaa...... > Reminds me of a trip that "Terrible Tailwheel Ted" and I took to Baraboo.... > 18,000 ft, sniffing the O2, Cruizin' along at a lot of MPH(Well over 225), > sipping 7.6 GPH....but didn't have an opportunity to take a picture of the > instrument panel...Too busy taking pictures of Montana... Sure was cold, > until the heater valve stuck open... Then we gently fried until we could > get on the ground in North Dakota... Gwinner.. Yep Red, it was > Gwinner, ND...non stop from Bonners Ferry, Idaho in 4 hours flat.. > > Since then, the Cabin Heat Valve has been secured in the "CLOSED" > position.... :) I might change it this winter. hahahhaa..... > Weav > ----- Original Message ----- > From: "Jim and Donna Clement" <168x@merr.com>> > To: >> > Sent: Tuesday, September 21, 2004 7:48 AM > Subject: Tailwind-List: Fw: Emailing:staying on top > > > > > > ----- Original Message ----- > > From: "Jim and Donna Clement" <168x@merr.com>> > > To: >> > > Sent: Tuesday, September 21, 2004 9:43 AM > > Subject: Emailing:staying on top > > > > > > > George, top this. Somewhere between Baraboo and Salome AZ. Slightly > > broken. > > > Jim C > > > > > > > > > > > > > > > ================================================ ================================================ http://www.matronics.com/chat> ================================================ tailwind-list@matronics.com> http://www.matronics.com/subscription> http://www.matronics.com/FAQ/Tailwind-List.htm Tailwind-List.htm> http://www.matronics.com/search> http://www.matronics.com/browse/tailwind-list e/tailwind-list> http://www.matronics.com/digest/tailwind-list t/tailwind-list> http://www.matronics.com/chat> http://www.matronics.com/archives> http://www.matronics.com/photoshare> http://www.matronics.com/tailwind-list t> http://www.matronics.com/emaillists> report> http://www.matronics.com/contribution> ================================================ ================================================ ================================================ http://www.matronics.com/chat ================================================ tailwind-list@matronics.com http://www.matronics.com/subscription http://www.matronics.com/FAQ/Tailwind-List.htm http://www.matronics.com/search http://www.matronics.com/browse/tailwind-list http://www.matronics.com/digest/tailwind-list http://www.matronics.com/chat http://www.matronics.com/archives http://www.matronics.com/photoshare http://www.matronics.com/tailwind-list http://www.matronics.com/emaillists report> http://www.matronics.com/contribution ================================================