Today's Message Index:
----------------------
1. 02:20 AM - List of Contributors Coming Soon! (Matt Dralle)
2. 11:27 AM - Re: We're still pluging away (Eric Schlanser)
3. 11:32 AM - Re: We're still pluging away (coolmate_04@cashette.com)
4. 11:32 AM - Re: We're still pluging away (coolmate_04@cashette.com)
5. 11:32 AM - Re: We're still pluging away (coolmate_04@cashette.com)
6. 11:37 AM - Elevator trim alternatives (Eric Schlanser)
7. 11:38 AM - Re: List of Contributors Coming Soon! (coolmate_04@cashette.com)
8. 11:45 AM - Re: We're still plugging away (Malcolm.Lovelace@coopertools.com)
9. 12:46 PM - [PLEASE READ] Lists Pummelled by Cashette.com Debacle... (Matt Dralle)
10. 12:58 PM - Re: We're still plugging away (Eric Schlanser)
11. 01:10 PM - Re: We're still plugging away (flamini2)
12. 01:17 PM - Re: We're still plugging away (flamini2)
13. 06:23 PM - Outbid on Ebay Tailwind (George Turner)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | List of Contributors Coming Soon! |
--> Tailwind-List message posted by: Matt Dralle <dralle@matronics.com>
Dear Listers,
There are only a couple more days left until the official end of this
year's Matronics List Fund Raiser. At the end of the month I compile and
post a list of all the members that made a Contribution to support the
Lists. Won't you take a moment and make sure your name is on that
list? Its your support that keeps these Lists up and running 24x7x365.
The List Contribution Site is easy and fast and most importantly
secure. You can make your donation with a credit card, PayPal, or by
sending in a personal check. For complete information, please see the URL
below:
http://www.matronics.com/contribution
Thank you!!
Matt Dralle
Email List Administrator
Matt G Dralle | Matronics | PO Box 347 | Livermore | CA | 94551
925-606-1001 V | 925-606-6281 F | dralle@matronics.com Email
http://www.matronics.com/ WWW | Featuring Products For Aircraft
do not archive
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws;
s=s1024; d=yahoo.com;
b=egi2xsuYPpDAUHhbGQm7Xl5T/Go35YMBUJ4DAedoagAUnKMXu9VsUGMQz4kftKKz1REdgYotjInhgrAjFF5x4El7WjmzasPOvoYe/y2IOsBsfnKjDRnje0wjrNAohadXJvlifmgX8qF2tcFitHFB0wzStxRMGxYrKP+h4XQHlwY=
;
| Subject: | Re: We're still pluging away |
CJ,
Can you describe your flap actuating mechanism and autopilot installation?
My W-10 plans version flap handle is taking up valuable real estate between the
seats.
Eric Schlanser, Kalamazoo, MI
Hey guys,
We're still plugging away down here in Memphis. N540CJ is coming along nicely.
46 build days into the project now and we have built, and fit the wings, welded
the fuse, built the tail feathers, elevators, rudder, stick, rudder pedals,
98% of the control system, a seat and a door. We would have two seats and two
doors but we ran out of argon today, and the welding stores aren't open. We should
receive our engine mount, and gear legs next week. Around then our engine
should be back from overhaul. We will be receiving our fuel tank, instrument
panel, cowling, spinner, and wheel pants from Brian Alley soon. We will be installing
a lightweight electric flap motor, and a Blue Mountain EFIS Sport with
autopilot. That should make those long flights to the airshows more comfortable.
Here are a few pictures of the fuse with the wings attached.
CJ Kirby
memphistailwind@bellsouth.net
N540CJ
> ATTACHMENT part 2 image/jpeg name=101_0168.jpg
> ATTACHMENT part 3 image/jpeg name=101_0167.jpg
---------------------------------
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: We're still pluging away |
--> Tailwind-List message posted by: "coolmate_04@cashette.com" <no-reply@cashette.com>
Dear Friend:
Thank you for your email. Your message has not reached my Inbox because you are
not yet on my Approved List. To reach my Inbox, please click on this link. When
I respond to your message, you will be automatically added to my Approved List!
Warm regards,
coolmate_04@cashette.com
__________________________
Note from Cashette:
If you don't see any link above, copy and paste the link below to your browser:
http://home.cashette.com/myCashette/newUser.do?ms=edanner%40jvlnet.com&mr=coolmate_04%40cashette.com&rid=coolmate_04&name=Bob+Danner&sec=fdZM&dt=1101756850018
If you are a business, click Business.
-----Original Message:-----
From: "Bob Danner" edanner@jvlnet.com
Subject: Re: Tailwind-List: We're still pluging away
Sent date: Sun Nov 28 16:55:34 PST 2004
__________________________
Cashette stops spam. 100% effective and free! Go to http://home.cashette.com
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: We're still pluging away |
--> Tailwind-List message posted by: "coolmate_04@cashette.com" <no-reply@cashette.com>
Dear Friend:
Thank you for your email. Your message has not reached my Inbox because you are
not yet on my Approved List. To reach my Inbox, please click on this link. When
I respond to your message, you will be automatically added to my Approved List!
Warm regards,
coolmate_04@cashette.com
__________________________
Note from Cashette:
If you don't see any link above, copy and paste the link below to your browser:
http://home.cashette.com/myCashette/newUser.do?ms=CARRXW10%40msn.com&mr=coolmate_04%40cashette.com&rid=coolmate_04&name=Alex+Frizzell&sec=nCem&dt=1101756850038
If you are a business, click Business.
-----Original Message:-----
From: "Alex Frizzell" CARRXW10@msn.com
Subject: Re: Tailwind-List: We're still pluging away
Sent date: Sun Nov 28 16:14:32 PST 2004
__________________________
Cashette stops spam. 100% effective and free! Go to http://home.cashette.com
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: We're still pluging away |
--> Tailwind-List message posted by: "coolmate_04@cashette.com" <no-reply@cashette.com>
Dear Friend:
Thank you for your email. Your message has not reached my Inbox because you are
not yet on my Approved List. To reach my Inbox, please click on this link. When
I respond to your message, you will be automatically added to my Approved List!
Warm regards,
coolmate_04@cashette.com
__________________________
Note from Cashette:
If you don't see any link above, copy and paste the link below to your browser:
http://home.cashette.com/myCashette/newUser.do?ms=CARRXW10%40msn.com&mr=coolmate_04%40cashette.com&rid=coolmate_04&name=Alex+Frizzell&sec=nCem&dt=1101756850049
If you are a business, click Business.
-----Original Message:-----
From: "Alex Frizzell" CARRXW10@msn.com
Subject: Re: Tailwind-List: We're still pluging away
Sent date: Sun Nov 28 17:13:21 PST 2004
__________________________
Cashette stops spam. 100% effective and free! Go to http://home.cashette.com
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws;
s=s1024; d=yahoo.com;
b=0I3YKXVNR8sgrXigs8Epl5MEC8a2Aq++dkeOoHIHO/34ADTh0eKEZNl/Gi3FxxN0CzYvieVdNWqVSAc76leDiDmG7KsmGEuuUeIO7QXOLhCv729ucgVSaERwWt6Zsh/jnND6XCYF01ejt1jMyDLr+1E/wZKb59Sjifu3uwO7V+8=
;
| Subject: | Elevator trim alternatives |
The W-10 plans version elevator trim looks like an afterthought. I would like to
get rid of my plans version W-10 elevator trim in favor of something less obtrusive.
I have been studying Brian Alley's trim handle and the original W-8 trim
handle. They are better but still both are in between the seats attached to
the flap handle in an area of valuable real estate in the cabin.
Has anyone else installed an electric or manual elevator trim setup on a W-10 Tailwind
with the plans control stick that eliminates the plans setup in favor
of something less obtrusive?
Eric Schlanser, Kalamazoo, MI
---------------------------------
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: List of Contributors Coming Soon! |
--> Tailwind-List message posted by: "coolmate_04@cashette.com" <no-reply@cashette.com>
Dear Friend:
Thank you for your email. Your message has not reached my Inbox because you are
not yet on my Approved List. To reach my Inbox, please click on this link. When
I respond to your message, you will be automatically added to my Approved List!
Warm regards,
coolmate_04@cashette.com
__________________________
Note from Cashette:
If you don't see any link above, copy and paste the link below to your browser:
http://home.cashette.com/myCashette/newUser.do?ms=dralle%40matronics.com&mr=coolmate_04%40cashette.com&rid=coolmate_04&name=Matt+Dralle&sec=yU%2BS&dt=1101757207182
If you are a business, click Business.
-----Original Message:-----
From: Matt Dralle dralle@matronics.com
Subject: Tailwind-List: List of Contributors Coming Soon!
Sent date: Mon Nov 29 02:15:00 PST 2004
__________________________
Cashette stops spam. 100% effective and free! Go to http://home.cashette.com
Message 8
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | We're still plugging away |
--> Tailwind-List message posted by: Malcolm.Lovelace@CooperTools.com
Eric how much room do you need. I can get my big rear (200#) and Ron's rear
(230#) in my Tailwind and work the flap handle with no problem. Remember
KISS.
Malcolm
> -----Original Message-----
> From: Eric Schlanser [SMTP:eschlanser@yahoo.com]
> Sent: Monday, November 29, 2004 2:27 PM
> To: tailwind-list@matronics.com
> Subject: Re: Tailwind-List: We're still pluging away
>
> CJ,
>
> Can you describe your flap actuating mechanism and autopilot installation?
>
>
> My W-10 plans version flap handle is taking up valuable real estate
> between the seats.
>
> Eric Schlanser, Kalamazoo, MI
>
> Hey guys,
> We're still plugging away down here in Memphis. N540CJ is coming
> along nicely. 46 build days into the project now and we have built, and
> fit the wings, welded the fuse, built the tail feathers, elevators,
> rudder, stick, rudder pedals, 98% of the control system, a seat and a
> door. We would have two seats and two doors but we ran out of argon today,
> and the welding stores aren't open. We should receive our engine mount,
> and gear legs next week. Around then our engine should be back from
> overhaul. We will be receiving our fuel tank, instrument panel, cowling,
> spinner, and wheel pants from Brian Alley soon. We will be installing a
> lightweight electric flap motor, and a Blue Mountain EFIS Sport with
> autopilot. That should make those long flights to the airshows more
> comfortable. Here are a few pictures of the fuse with the wings attached.
> CJ Kirby
> memphistailwind@bellsouth.net <mailto:memphistailwind@bellsouth.net>
> N540CJ
>
>
> > ATTACHMENT part 2 image/jpeg name=101_0168.jpg
>
>
> > ATTACHMENT part 3 image/jpeg name=101_0167.jpg
>
>
> _____
>
> <http://us.rd.yahoo.com/mail_us/taglines/mobile/*http://mobile.yahoo.com/m
> aildemo> Get it on your mobile phone.
Message 9
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | [PLEASE READ] Lists Pummelled by Cashette.com Debacle... |
--> Tailwind-List message posted by: Matt Dralle <dralle@matronics.com>
Listers,
Just a quick note to say that I've caught the great Cashette.Com debacle of
2004 and have tried to clean out all of the pending List email queues of
all the "you are not yet on my Approved List" messages. There were about
117 of them queued when I noticed what was going on.
In a nutshell, this guy signed up for all of the Lists and had a "register
with my site" spam filter enabled on his account. When his account started
receiving List messages, it started sending back, "you need to register"
messages back to the various Lists which in turn went to the Lists which in
turn got sent to the same spam filter which in turn sent back a message
indicating that the List needed to register, and so on and so on until, I
suppose, the Internet just blew up! Sheeze, some of these spam systems are
so brain dead!
Anyway, I've cleaned out all of the messages generated by this thing and
put in a permanent block from this cashette.com website so that this
shouldn't be a problem any longer.
Back to Airplane Discussions! :-)
Matt Dralle
List Administrator
Matt G Dralle | Matronics | PO Box 347 | Livermore | CA | 94551
925-606-1001 V | 925-606-6281 F | dralle@matronics.com Email
http://www.matronics.com/ WWW | Featuring Products For Aircraft
do not archive
Message 10
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws;
s=s1024; d=yahoo.com;
b=VldSvBgzynEx3PLERbIeMNmy/5Xp3v7puOQt8R2LaNKMJfXx4i8PTT/TOQPxXZe5Lx6Bo41nbFshaZStg6x/Wj9slZ4iEh0HsWoRgI9Pmy9xMHBswhvpCH0b/A+l6BxEquOlNJR1NELMFJuqcenS1KkmGmwTD1SyLe9cVU9XgGA=
;
| Subject: | We're still plugging away |
Malcolm, I am curious about CJ's installation. I will keep my flap handle as it's
done and shouldn't be a problem with my skinny butt.
Thanks for the uh, interesting information. And I don't want to have that mental
picture and remember KISS at the same time thanks just the same. Hahaha.
Eric - do not archive
- the only stupid question is the one that wasn't asked.
Malcolm.Lovelace@coopertools.com wrote:
--> Tailwind-List message posted by: Malcolm.Lovelace@CooperTools.com
Eric how much room do you need. I can get my big rear (200#) and Ron's rear
(230#) in my Tailwind and work the flap handle with no problem. Remember
KISS.
Malcolm
> -----Original Message-----
> From: Eric Schlanser [SMTP:eschlanser@yahoo.com]
> Sent: Monday, November 29, 2004 2:27 PM
> To: tailwind-list@matronics.com
> Subject: Re: Tailwind-List: We're still pluging away
>
> CJ,
>
> Can you describe your flap actuating mechanism and autopilot installation?
>
>
> My W-10 plans version flap handle is taking up valuable real estate
> between the seats.
>
> Eric Schlanser, Kalamazoo, MI
>
> Hey guys,
> We're still plugging away down here in Memphis. N540CJ is coming
> along nicely. 46 build days into the project now and we have built, and
> fit the wings, welded the fuse, built the tail feathers, elevators,
> rudder, stick, rudder pedals, 98% of the control system, a seat and a
> door. We would have two seats and two doors but we ran out of argon today,
> and the welding stores aren't open. We should receive our engine mount,
> and gear legs next week. Around then our engine should be back from
> overhaul. We will be receiving our fuel tank, instrument panel, cowling,
> spinner, and wheel pants from Brian Alley soon. We will be installing a
> lightweight electric flap motor, and a Blue Mountain EFIS Sport with
> autopilot. That should make those long flights to the airshows more
> comfortable. Here are a few pictures of the fuse with the wings attached.
> CJ Kirby
> memphistailwind@bellsouth.net
> N540CJ
>
>
> > ATTACHMENT part 2 image/jpeg name=101_0168.jpg
>
>
> > ATTACHMENT part 3 image/jpeg name=101_0167.jpg
>
>
> _____
>
> > aildemo> Get it on your mobile phone.
---------------------------------
Message 11
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: We're still plugging away |
Erik,
See the photo, it may help.
Dennis Flamini N564DF race #53 Chicago
----- Original Message -----
From: Eric Schlanser
To: tailwind-list@matronics.com
Sent: Monday, November 29, 2004 2:58 PM
Subject: RE: Tailwind-List: We're still plugging away
Malcolm, I am curious about CJ's installation. I will keep my flap handle as
it's done and shouldn't be a problem with my skinny butt.
Thanks for the uh, interesting information. And I don't want to have that mental
picture and remember KISS at the same time thanks just the same. Hahaha.
Eric - do not archive
- the only stupid question is the one that wasn't asked.
Malcolm.Lovelace@coopertools.com wrote:
--> Tailwind-List message posted by: Malcolm.Lovelace@CooperTools.com
Eric how much room do you need. I can get my big rear (200#) and Ron's rear
(230#) in my Tailwind and work the flap handle with no problem. Remember
KISS.
Malcolm
> -----Original Message-----
> From: Eric Schlanser [SMTP:eschlanser@yahoo.com]
> Sent: Monday, November 29, 2004 2:27 PM
> To: tailwind-list@matronics.com
> Subject: Re: Tailwind-List: We're still pluging away
>
> CJ,
>
> Can you describe your flap actuating mechanism and autopilot installation?
>
>
> My W-10 plans version flap handle is taking up valuable real estate
> between the seats.
>
> Eric Schlanser, Kalamazoo, MI
>
> Hey guys,
> We're still plugging away down here in Memphis. N540CJ is coming
along nicely. 46 build days into the project now and we have built, and
> fit the wings, welded the fuse, built the tail feathers, elevators,
> rudder, stick, rudder pedals, 98% of the control system, a seat and a
> door. We would have two seats and two doors but we ran out of argon today,
> and the welding stores aren't open. We should receive our engine mount,
> and gear legs next week. Around then our engine should be back from
> overhaul. We will be receiving our fuel tank, instrument panel, cowling,
> spinner, and wheel pants from Brian Alley soon. We will be installing a
> lightweight electric flap motor, and a Blue Mountain EFIS Sport with
> autopilot. That should make those long flights to the airshows more
> comfortable. Here are a few pictures of the fuse with the wings attached.
> CJ Kirby
> memphistailwind@bellsouth.net < BR>> List
Message 12
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: We're still plugging away |
Eric,
This is mine modified to move the trim handle forward, only reqd if you do not
want to touch your
co-pilots rearend.
Dennis Flamini N564DF race #53 Chicago
----- Original Message -----
From: Eric Schlanser
To: tailwind-list@matronics.com
Sent: Monday, November 29, 2004 2:58 PM
Subject: RE: Tailwind-List: We're still plugging away
Malcolm, I am curious about CJ's installation. I will keep my flap handle as
it's done and shouldn't be a problem with my skinny butt.
Thanks for the uh, interesting information. And I don't want to have that mental
picture and remember KISS at the same time thanks just the same. Hahaha.
Eric - do not archive
- the only stupid question is the one that wasn't asked.
Malcolm.Lovelace@coopertools.com wrote:
--> Tailwind-List message posted by: Malcolm.Lovelace@CooperTools.com
Eric how much room do you need. I can get my big rear (200#) and Ron's rear
(230#) in my Tailwind and work the flap handle with no problem. Remember
KISS.
Malcolm
> -----Original Message-----
> From: Eric Schlanser [SMTP:eschlanser@yahoo.com]
> Sent: Monday, November 29, 2004 2:27 PM
> To: tailwind-list@matronics.com
> Subject: Re: Tailwind-List: We're still pluging away
>
> CJ,
>
> Can you describe your flap actuating mechanism and autopilot installation?
>
>
> My W-10 plans version flap handle is taking up valuable real estate
> between the seats.
>
> Eric Schlanser, Kalamazoo, MI
>
> Hey guys,
> We're still plugging away down here in Memphis. N540CJ is coming
along nicely. 46 build days into the project now and we have built, and
> fit the wings, welded the fuse, built the tail feathers, elevators,
> rudder, stick, rudder pedals, 98% of the control system, a seat and a
> door. We would have two seats and two doors but we ran out of argon today,
> and the welding stores aren't open. We should receive our engine mount,
> and gear legs next week. Around then our engine should be back from
> overhaul. We will be receiving our fuel tank, instrument panel, cowling,
> spinner, and wheel pants from Brian Alley soon. We will be installing a
> lightweight electric flap motor, and a Blue Mountain EFIS Sport with
> autopilot. That should make those long flights to the airshows more
> comfortable. Here are a few pictures of the fuse with the wings attached.
> CJ Kirby
> memphistailwind@bellsouth.net < BR>> List
Message 13
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws;
s=s1024; d=yahoo.com;
b=DQ1BggeoPX8a3sCZG0Qfg1457k0dgUDwPmgVabHgE/+aHFL2+gSFky2HV/35/XYpPbrSv+v4hl0qlH/BjPtlZuGBIMHqcFGKV+PHEd/si7vQy+xCcw3UcSAKlxxDjZGwaJHfPFy3pubwuxQbnB8MEpvDDrVUysIACE/7BWbROSM=
;
| Subject: | Outbid on Ebay Tailwind |
Lost the bid on this one.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=5937567519&ssPageName=ADME:B:DS:US:6
George
Do not archive.
---------------------------------
---------------------------------
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|