Today's Message Index:
----------------------
1. 05:07 AM - Re: FAA inspector (Fred Weaver)
2. 06:25 AM - Re: FAA inspector (Stephen Doughty)
3. 07:49 AM - Re: FAA inspector (Bob Danner)
4. 10:32 AM - Baraboo (John Downing)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: FAA inspector |
--> Tailwind-List message posted by: "Fred Weaver" <Mytyweav@earthlink.net>
WOW!!! Wouldn't you know it? I leave my computer alone for a day or so and
All kinds of good stuff happens. Jim, another great achievment. Hope the
fuel flows nice and smooth. It should feel real good having another airplane
to fly. Looking forward to AZ...
Weav
PS.. Back in April, I took your advice... I had Heating and
Airconditioning installed here at the house and out in the shop too. Now,
when the temps are in the 20's and 30's, I just push a button and the
propane does a great job. Funny, I don't use hardly a fraction of the Oak I
used to burn. Loving my new thermostat....
----- Original Message -----
From: "Jim and Donna Clement" <168x@merr.com>
Subject: Tailwind-List: FAA inspector
> Ray Peterson from the FAA inspected my TW today and issued the
airworthiness
> certificate. The only thing he mentioned I should do is redline the oil
> temp. and pressure gauges. Somehow I forgot them, everything else had the
> proper markings. It is going to be 5 - 10 below zero the next couple of
days
> so I might wait until it warms up some before I fly it
> Jim C
>
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
--> Tailwind-List message posted by: "Stephen Doughty" <usaviator1@hotmail.com>
Hey Jim, good deal, you will have started, built and have flying in less
time that it has taken me to get mine on its gear! Looking forward to
seeing you this summer.
Hope everybody has a great and Merry Christmas, even you Eric. :)
Steve (now an A&P) -in Michigan
ps. hey Eric, how about breakfast after the holidays?
>From: "Jim and Donna Clement" <168x@merr.com>
>Reply-To: tailwind-list@matronics.com
>To: <tailwind-list@matronics.com>
>Subject: Tailwind-List: FAA inspector
>Date: Wed, 22 Dec 2004 22:10:23 -0600
>
>Ray Peterson from the FAA inspected my TW today and issued the
>airworthiness certificate. The only thing he mentioned I should do is
>redline the oil temp. and pressure gauges. Somehow I forgot them,
>everything else had the proper markings. It is going to be 5 - 10 below
>zero the next couple of days so I might wait until it warms up some before
>I fly it
>Jim C
><< ctor002.jpg >>
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: FAA inspector |
--> Tailwind-List message posted by: "Bob Danner" <edanner@jvlnet.com>
Hey Stephen dont feel left out Jim built two complete airplanes while i was
building mine . i got so confused a couple of time i didnt know witch one i
was trying to COPY ! Bob Danner
----- Original Message -----
From: "Stephen Doughty" <usaviator1@hotmail.com>
Subject: RE: Tailwind-List: FAA inspector
> --> Tailwind-List message posted by: "Stephen Doughty"
> <usaviator1@hotmail.com>
>
> Hey Jim, good deal, you will have started, built and have flying in less
> time that it has taken me to get mine on its gear! Looking forward to
> seeing you this summer.
>
> Hope everybody has a great and Merry Christmas, even you Eric. :)
>
> Steve (now an A&P) -in Michigan
>
> ps. hey Eric, how about breakfast after the holidays?
>
>
>>From: "Jim and Donna Clement" <168x@merr.com>
>>Reply-To: tailwind-list@matronics.com
>>To: <tailwind-list@matronics.com>
>>Subject: Tailwind-List: FAA inspector
>>Date: Wed, 22 Dec 2004 22:10:23 -0600
>>
>>Ray Peterson from the FAA inspected my TW today and issued the
>>airworthiness certificate. The only thing he mentioned I should do is
>>redline the oil temp. and pressure gauges. Somehow I forgot them,
>>everything else had the proper markings. It is going to be 5 - 10 below
>>zero the next couple of days so I might wait until it warms up some before
>>I fly it
>>Jim C
>><< ctor002.jpg >>
>
>
>
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
--> Tailwind-List message posted by: "John Downing" <frmrjohn@netonecom.net>
Eric; Maybe you should entertain the thought of contracting with the guy in
Baraboo to finish your plane, that way all you would have to do is load it
in a trailer and haul it over there and it would be there for the fly-in
next summer. Finished installing the baggage compartment panels today
without the carpet. Have a Merry Christmas Guys. JohnD
---
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|