---------------------------------------------------------- Tailwind-List Digest Archive --- Total Messages Posted Fri 03/04/05: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 03:27 AM - Re: Fuel tank () 2. 08:40 AM - Re: Fuel tank (james wright) ________________________________ Message 1 _____________________________________ Time: 03:27:08 AM PST US From: Subject: Re: Tailwind-List: Fuel tank Yes. ----- Original Message ----- From: Dennis Flamini To: tailwind-list@matronics.com Sent: Thursday, March 03, 2005 9:49 PM Subject: Re: Tailwind-List: Fuel tank Are you the Pat that banner towed with my Pacer? Dennis in Chicago ----- Original Message ----- From: patmc2002@sbcglobal.net To: tailwind-list@matronics.com Sent: Thursday, March 03, 2005 9:37 PM Subject: Re: Tailwind-List: Fuel tank Dennis, On my Sonnerai I cut up old bicycle inner tubes into strips and put them between the straps and tubes and any supports that the tank rests on. I pulled the sheet metal of the front end after 4 years so I could take a real good look and everything looked like I just installed it. Pat Mc. ----- Original Message ----- From: Dennis Flamini To: tailwind-list@matronics.c Sent: Thursday, March 03, 2005 5:18 PM Subject: Tailwind-List: Fuel tank i am putting the tank in my biplane and was wondering what to put between the stainless straps and the alum. also between the alum and the steel tube cross members. Thanks, Dennis in Chicago ________________________________ Message 2 _____________________________________ Time: 08:40:18 AM PST US From: "james wright" Subject: Re: Tailwind-List: Fuel tank AIRCRAFT SPRUCE SELLS STAINLESS STRAPS AND A RUBBER-PAD MADE TO FIT THE STRAP I HAVE USED IT---- Original Message ----- From: Dennis Flamini To: tailwind-list@matronics.c Sent: Thursday, March 03, 2005 5:18 PM Subject: Tailwind-List: Fuel tank i am putting the tank in my biplane and was wondering what to put between the stainless straps and the alum. also between the alum and the steel tube cross members. Thanks, Dennis in Chicago