Today's Message Index:
----------------------
1. 05:44 AM - Re: Fuel tank (William Bernard)
2. 06:49 PM - Re: Fuel tank (Dennis Flamini)
3. 06:59 PM - Re: Fuel tank (IslPilot@aol.com)
4. 07:12 PM - Re: Fuel tank (Dennis Flamini)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Dennis, ACS sells a rubber channel that will fit over a 1" metal strap. I used
this in my Tailwind. Another alternative is some felt strips from the weather
stripping section of the hardware store.
Bill
----- Original Message -----
From: Dennis Flamini
To: tailwind-list@matronics.c
Sent: Thursday, March 03, 2005 5:18 PM
Subject: Tailwind-List: Fuel tank
i am putting the tank in my biplane and was wondering what to put between the
stainless straps and the alum. also between the
alum and the steel tube cross members.
Thanks,
Dennis in Chicago
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.6.2 - Release Date: 3/4/05
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
thanks Bill and others,
i am in Florida working on the Tailwind for the Sun 100 race with the new owner,
David Berelsman.
It will look better than it ever did when i owned it!!
Photos when i get back to
Chicago.
----- Original Message -----
From: William Bernard
To: tailwind-list@matronics.com
Sent: Saturday, March 05, 2005 7:48 AM
Subject: Re: Tailwind-List: Fuel tank
Dennis, ACS sells a rubber channel that will fit over a 1" metal strap. I used
this in my Tailwind. Another alternative is some felt strips from the weather
stripping section of the hardware store.
Bill
----- Original Message -----
From: Dennis Flamini
To: tailwind-list@matronics.c
Sent: Thursday, March 03, 2005 5:18 PM
Subject: Tailwind-List: Fuel tank
i am putting the tank in my biplane and was wondering what to put between the
stainless straps and the alum. also between the
alum and the steel tube cross members.
Thanks,
Dennis in Chicago
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.6.2 - Release Date: 3/4/05
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.6.2 - Release Date: 3/4/05
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Dennis:
Where are you working on the plane in FL? Sitting bored in FLL waiting on
the next trip.
Paul
CVX
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Paul,
We are at Kissimmee airport East hangers, 5J.
Will be working today and tomorrow only then back to Chicago.
We should be painting about the third week in March.
i was feeling good today working on the Tailwind with T-6's and a
Spitfire and lots of jets and helicopters and experimentals
all day, must be one of the busiest nonsch airport around.
Dennis in Kissimmee from Chicago.
----- Original Message -----
From: IslPilot@aol.com
To: tailwind-list@matronics.com
Sent: Saturday, March 05, 2005 8:58 PM
Subject: Re: Tailwind-List: Fuel tank
Dennis:
Where are you working on the plane in FL? Sitting bored in FLL waiting on the
next trip.
Paul
CVX
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|