---------------------------------------------------------- Tailwind-List Digest Archive --- Total Messages Posted Tue 03/08/05: 3 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:48 AM - Re: Rudder Cables (William Bernard) 2. 07:24 AM - Re: Rudder Cables (PullSomeGs@aol.com) 3. 08:39 AM - Cracked dope and urethane repair (flamini2) ________________________________ Message 1 _____________________________________ Time: 04:48:43 AM PST US From: "William Bernard" Subject: Re: Tailwind-List: Rudder Cables Skip, what went wrong? Too long? Too Short? Order Lost? Bill ----- Original Message ----- From: PullSomeGs@aol.com To: tailwind-list@matronics.com Sent: Monday, March 07, 2005 7:20 AM Subject: Tailwind-List: Rudder Cables Aircraft Spruce screwed up my rudder cable order... anyone know of a quicker option? I have a nicopress tool, but like the swaged MS ends much better. Thanks, Skip Stewart Airshows PullSomeGs@aol.com www.SkipStewartAirshows.com 901-355-4100 No virus found in this incoming message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.6.2 - Release Date: 3/4/05 No virus found in this outgoing message. Checked by AVG Anti-Virus. ________________________________ Message 2 _____________________________________ Time: 07:24:32 AM PST US From: PullSomeGs@aol.com Subject: Re: Tailwind-List: Rudder Cables Order was lost.. I gave it over the phone to a woman who was unsure what I was talking about. I gave her the page number in the catalog, the lenghts, ends, etc.. everything needed. She said she may have someone call me back for clarification. No call.. Waited two weeks and started to feel uneasy about it..so I called to check....never heard of it! Said another three to four weeks. Problem solved...Kimball Enterprises (makers of the Model 12) are sending them up today... Skip Stewart Airshows PullSomeGs@aol.com _www.SkipStewartAirshows.com_ (http://www.skipstewartairshows.com/) 901-355-4100 ________________________________ Message 3 _____________________________________ Time: 08:39:22 AM PST US From: "flamini2" Subject: Tailwind-List: Cracked dope and urethane repair Greetings from Kissimmee, Florida, It sure is nice to work on the Tailwind in the sunshine state. Dave and i put in 2 days hard work while the wives shopped and played. After Sat. nite's e-mail, Paul Barron stopped by from West Palm Beach and we had a mini Tailwind get-together. PS, to Paul, post some photos of the "Deere" for us. Dave and Paul talked nonstop about mods while i tried to actually do some. While i was sanding Forest Lovely called and joined in on the fun. i asked Forrest if his 35 year old recover job was still under warranty? That is Dave, sitting and Paul with the bare (no race # or RV-10 sign) Tailwind. The 3 photos of the fin are an illustration of the "Berelsman cracked urethane and dope fix" He worked 3M flexible bumper epoxy under the crack, then taped over the repair and flattened the patch until the epoxy hardened, pulled the tape off and you could almost just paint over it!! Dennis, no plane but still working on it and having a blast. and back in Chicago