---------------------------------------------------------- Tailwind-List Digest Archive --- Total Messages Posted Mon 04/25/05:2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 05:42 AM - Re: Buttercup Project (Kayberg@aol.com) 2. 03:53 PM - Re: Buttercup Project (Earl Luce) ________________________________ Message 1 _____________________________________ Time: 05:42:13 AM PST US From: Kayberg@aol.com Subject: Re: Tailwind-List: Buttercup Project In a message dated 4/23/2005 7:29:59 PM Eastern Daylight Time, wittmanguru@yahoo.com writes: Hi Gang , I built a Buttercup fuselage for a customer in Illinois, near Champain . He had a set back and can't finish it . The project is on the gear , brand new Clevelands in the box, spars from ACS in the box , all ribs are built, seats, tail feathers, control stick, flap handle , rudder pedals,ect. He is picking it up friday to take it home . Let me know if anyone is interested . Earl Luce earl@luceair.com Earl, Do you have an idea of the cost ? Doug Koenigsberg ________________________________ Message 2 _____________________________________ Time: 03:53:14 PM PST US s=s1024; d=yahoo.com; b=g8n9jXVPcUF7oNWr5GlDJScxrlwGlMyStCotFQqb3Znr1z6X/dNTETIL9idZ74KyJeS3S2MP7pw2kHLVsLUI6mFF4ObWxY55u9OdPp6sRceglbCRbdCGA6vLof65wsPxTAaFDU2GkNOmoPlUa9YP0nmgdE120W3gTdSjwL4YKBE= ; From: Earl Luce Subject: Re: Tailwind-List: Buttercup Project Hi Doug, I think he is asking $10 K . John Severson 217-688-3715. Kayberg@aol.com wrote: In a message dated 4/23/2005 7:29:59 PM Eastern Daylight Time, wittmanguru@yahoo.com writes: Hi Gang , I built a Buttercup fuselage for a customer in Illinois, near Champain . He had a set back and can't finish it . The project is on the gear , brand new Clevelands in the box, spars from ACS in the box , all ribs are built, seats, tail feathers, control stick, flap handle , rudder pedals,ect. He is picking it up friday to take it home . Let me know if anyone is interested . Earl Luce earl@luceair.com Earl, Do you have an idea of the cost ? Doug Koenigsberg