----------------------------------------------------------
                           Tailwind-List Digest Archive
                                      ---
                     Total Messages Posted Wed 06/29/05: 3
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 05:57 PM - Re: Tailight  (GORDON PARKER)
     2. 07:13 PM - Re: Tailight  (Eric Schlanser)
     3. 10:29 PM - Re: Tailight  (GORDON PARKER)
 
 
 
________________________________  Message 1  _____________________________________


Time: 05:57:51 PM PST US
From: "GORDON PARKER" <gptailwind@msn.com>
Subject: Re: Tailwind-List: Tailight


  Has any one used the polycarbonate  that Shields makes? I think they are in Indiana and make boat and race car windshields out of this stuff.  Their site is www.racingshields.com<http://www.racingshields.com/>,  Says its super hard coated-anti fog -chemical resistant. I am considering changing out mine and going to 3/16 something.  Any suggestions- Gordon 9168Q
________________________________  Message 2  _____________________________________


Time: 07:13:40 PM PST US
  s=s1024; d=yahoo.com;
  b=VRznmwm06QEbSZLP7uOOkrQFyBf3D7atX3zVdSaLJLdwLrURtR9HonkKs1wwK/FGPmPNwBUFE7Dn139+NOrM/vm5ch1ffUl+plifPwqsaZSlUtgxl+dIka5++2aVr4pCSIJjLZBxXEBgJX57ILFcDZdZYWO9UseCEyvZ7vIiwqM=
;
From: Eric Schlanser <eschlanser@yahoo.com>
Subject: Re: Tailwind-List: Tailight

--> Tailwind-List message posted by: Eric Schlanser <eschlanser@yahoo.com>

Seems a bit much for a taillight. I think Jim C's
suggestion of a light bulb is enough. 

You might think of using it for a windshield. That
would be good. But at $265 for a 48"x64"x3/16" piece I
think they are rather pricey. I got my coated
polycarbonate sheet for about half that at a local
plastics dealer. Where are you? Eric - SW Michigan

--- GORDON PARKER <gptailwind@msn.com> wrote:

> 
>   Has any one used the polycarbonate  that Shields
> makes? I think they are in Indiana and make boat and
> race car windshields out of this stuff.  Their site
> is
>
www.racingshields.com<http://www.racingshields.com/>,
>  Says its super hard coated-anti fog -chemical
> resistant. I am considering changing out mine and
> going to 3/16 something.  Any suggestions- Gordon
9168Q


________________________________  Message 3  _____________________________________


Time: 10:29:55 PM PST US
From: "GORDON PARKER" <gptailwind@msn.com>
Subject: Re: Tailwind-List: Tailight

--> Tailwind-List message posted by: "GORDON PARKER" <gptailwind@msn.com>


Eric--I live way  in the northwest corner of Washington.  30 miles west of 
Arlington.  I ran into that web site and thought it sounded pretty good 
except for the price.  I liked the part of being chemical (gas) resistant 
and also fog proof.  Gordon 9168Q