Today's Message Index:
----------------------
1. 06:22 AM - Re: Tailight (Paul Baron)
2. 06:54 AM - Windshield was Re: Tailight (Eric Schlanser)
3. 07:30 AM - Re: Tailight (Jim Wickert)
4. 03:31 PM - Re: Windshield was Re: Tailight (Paul Baron)
5. 03:31 PM - Re: Tailight (Paul Baron)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
<BAY107-DAV16D9A23733FA7604F66F49C9E80@phx.gbl>
<001901c576db$e4733cc0$0401a8c0@new>
<027201c57738$07b36b40$ce275142@FalconLaptop>
<BAY107-DAV14889A81AB8B6E1BDFF3DDD6E30@phx.gbl>
--> Tailwind-List message posted by: Paul Baron <IslPilot@aol.com>
That is what I am using now Gordon. The 3/16" matl. No problems so far!
Paul F. Baron
Latitude 45, Inc.
231-237-4500
Sent with SnapperMail
www.snappermail.com
...... Original Message .......
On Wed, 29 Jun 2005 17:57:19 -0700 "GORDON PARKER" <gptailwind@msn.com>
wrote:
>
>
>Has any one used the polycarbonate that Shields makes? I think they are
in Indiana and make boat and race car windshields out of this stuff. Their
site is www.racingshields.com, Says its super hard coated-anti fog
-chemical resistant. I am considering changing out mine and going to 3/16
something. Any suggestions- Gordon 9168Q
>
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
s=s1024; d=yahoo.com;
b=VIaTBzd6FpWBdQjKE7HiDeR+jOt/iViD6vjDm5KQe/gsLQuI79gy2EFIGtOzHse7vG0kfl9STDRePnFz9zM+m8rHeq7jQEkiGrHc/z7QRpw9LxS8pBKdOrf1gEpI3DfElr8Z4aARMxTwI7sxKFe83k4GR2cn/LyZC16S7PKXhzU=
;
Paul, Did you get it from Shields or from Total Plastics in Grand Rapids? Eric
Paul Baron <IslPilot@aol.com> wrote:
--> Tailwind-List message posted by: Paul Baron
That is what I am using now Gordon. The 3/16" matl. No problems so far!
Paul F. Baron
Latitude 45, Inc.
231-237-4500
Sent with SnapperMail
www.snappermail.com
...... Original Message .......
On Wed, 29 Jun 2005 17:57:19 -0700 "GORDON PARKER"
wrote:
>
>
>Has any one used the polycarbonate that Shields makes? I think they are
in Indiana and make boat and race car windshields out of this stuff. Their
site is www.racingshields.com, Says its super hard coated-anti fog
-chemical resistant. I am considering changing out mine and going to 3/16
something. Any suggestions- Gordon 9168Q
>
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> Tailwind-List message posted by: Jim Wickert <jimw_btg@earthlink.net>
Paul
Are you heat forming it or using it in flat panels? If heat forming what has been
the temp you are using. Thanks
Jim W
-----Original Message-----
From: Paul Baron <IslPilot@aol.com>
Subject: Re: Tailwind-List: Tailight
--> Tailwind-List message posted by: Paul Baron <IslPilot@aol.com>
That is what I am using now Gordon. The 3/16" matl. No problems so far!
Paul F. Baron
Latitude 45, Inc.
231-237-4500
Sent with SnapperMail
www.snappermail.com
...... Original Message .......
On Wed, 29 Jun 2005 17:57:19 -0700 "GORDON PARKER" <gptailwind@msn.com>
wrote:
>
>
>Has any one used the polycarbonate that Shields makes? I think they are
in Indiana and make boat and race car windshields out of this stuff. Their
site is www.racingshields.com, Says its super hard coated-anti fog
-chemical resistant. I am considering changing out mine and going to 3/16
something. Any suggestions- Gordon 9168Q
>
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
<20050630135355.60652.qmail@web50810.mail.yahoo.com>
--> Tailwind-List message posted by: Paul Baron <IslPilot@aol.com>
Erix- I got it from Total Plastics but same brand.
Paul F. Baron
Latitude 45, Inc.
231-237-4500
Sent with SnapperMail
www.snappermail.com
...... Original Message .......
On Thu, 30 Jun 2005 06:53:55 -0700 (PDT) "Eric Schlanser"
<eschlanser@yahoo.com> wrote:
>Paul, Did you get it from Shields or from Total Plastics in Grand Rapids?
Eric
>
>Paul Baron <IslPilot@aol.com> wrote:
> Use the
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
<23416133.1120141826294.JavaMail.root@wamui-darkeyed.atl.sa.earthlink.net>
<23416133.1120141826294.JavaMail.root@wamui-darkeyed.atl.sa.earthlink.net>
--> Tailwind-List message posted by: Paul Baron <IslPilot@aol.com>
Jim -
I tried heat forming scraps after talking to friends at the marina that
do it all the time. It seemed too critical in temp range and in distortion
and little micro bubbles. Just put it on cold.
Paul F. Baron
Latitude 45, Inc.
231-237-4500
Sent with SnapperMail
www.snappermail.com
...... Original Message .......
On Thu, 30 Jun 2005 10:30:26 -0400 (EDT) "Jim Wickert"
<jimw_btg@earthlink.net> wrote:
>--> Tailwind-List message posted by: Jim Wickert <jimw_btg@earthlink.net>
>
>Paul
>
>Are you heat forming it or using it in flat panels? If heat forming what
has been the temp you are using. Thanks
>Jim W
>
>-----Original Message-----
>From: Paul Baron <IslPilot@aol.com>
>Sent: Jun 30, 2005 9:21 AM
>To: tailwind-list@matronics.com
>Subject: Re: Tailwind-List: Tailight
>
>--> Tailwind-List message posted by: Paul Baron <IslPilot@aol.com>
>
>That is what I am using now Gordon. The 3/16" matl. No problems so far!
>
>Paul F. Baron
>Latitude 45, Inc.
>231-237-4500
>
>Sent with SnapperMail
>www.snappermail.com
>
>...... Original Message .......
>On Wed, 29 Jun 2005 17:57:19 -0700 "GORDON PARKER" <gptailwind@msn.com>
>wrote:
>>
>>
>>Has any one used the polycarbonate that Shields makes? I think they are
>in Indiana and make boat and race car windshields out of this stuff. Their
>site is www.racingshields.com, Says its super hard coated-anti fog
>-chemical resistant. I am considering changing out mine and going to 3/16
>something. Any suggestions- Gordon 9168Q
>>
>
>
>
>
>
>
>
>
>
>
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|