---------------------------------------------------------- Tailwind-List Digest Archive --- Total Messages Posted Thu 06/30/05: 5 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 06:22 AM - Re: Tailight (Paul Baron) 2. 06:54 AM - Windshield was Re: Tailight (Eric Schlanser) 3. 07:30 AM - Re: Tailight (Jim Wickert) 4. 03:31 PM - Re: Windshield was Re: Tailight (Paul Baron) 5. 03:31 PM - Re: Tailight (Paul Baron) ________________________________ Message 1 _____________________________________ Time: 06:22:53 AM PST US Subject: Re: Tailwind-List: Tailight <001901c576db$e4733cc0$0401a8c0@new> <027201c57738$07b36b40$ce275142@FalconLaptop> From: Paul Baron --> Tailwind-List message posted by: Paul Baron That is what I am using now Gordon. The 3/16" matl. No problems so far! Paul F. Baron Latitude 45, Inc. 231-237-4500 Sent with SnapperMail www.snappermail.com ...... Original Message ....... On Wed, 29 Jun 2005 17:57:19 -0700 "GORDON PARKER" wrote: > > >Has any one used the polycarbonate that Shields makes? I think they are in Indiana and make boat and race car windshields out of this stuff. Their site is www.racingshields.com, Says its super hard coated-anti fog -chemical resistant. I am considering changing out mine and going to 3/16 something. Any suggestions- Gordon 9168Q > ________________________________ Message 2 _____________________________________ Time: 06:54:16 AM PST US s=s1024; d=yahoo.com; b=VIaTBzd6FpWBdQjKE7HiDeR+jOt/iViD6vjDm5KQe/gsLQuI79gy2EFIGtOzHse7vG0kfl9STDRePnFz9zM+m8rHeq7jQEkiGrHc/z7QRpw9LxS8pBKdOrf1gEpI3DfElr8Z4aARMxTwI7sxKFe83k4GR2cn/LyZC16S7PKXhzU= ; From: Eric Schlanser Subject: Windshield was Re: Tailwind-List: Tailight Paul, Did you get it from Shields or from Total Plastics in Grand Rapids? Eric Paul Baron wrote: --> Tailwind-List message posted by: Paul Baron That is what I am using now Gordon. The 3/16" matl. No problems so far! Paul F. Baron Latitude 45, Inc. 231-237-4500 Sent with SnapperMail www.snappermail.com ...... Original Message ....... On Wed, 29 Jun 2005 17:57:19 -0700 "GORDON PARKER" wrote: > > >Has any one used the polycarbonate that Shields makes? I think they are in Indiana and make boat and race car windshields out of this stuff. Their site is www.racingshields.com, Says its super hard coated-anti fog -chemical resistant. I am considering changing out mine and going to 3/16 something. Any suggestions- Gordon 9168Q > ________________________________ Message 3 _____________________________________ Time: 07:30:57 AM PST US From: Jim Wickert Subject: Re: Tailwind-List: Tailight --> Tailwind-List message posted by: Jim Wickert Paul Are you heat forming it or using it in flat panels? If heat forming what has been the temp you are using. Thanks Jim W -----Original Message----- From: Paul Baron Subject: Re: Tailwind-List: Tailight --> Tailwind-List message posted by: Paul Baron That is what I am using now Gordon. The 3/16" matl. No problems so far! Paul F. Baron Latitude 45, Inc. 231-237-4500 Sent with SnapperMail www.snappermail.com ...... Original Message ....... On Wed, 29 Jun 2005 17:57:19 -0700 "GORDON PARKER" wrote: > > >Has any one used the polycarbonate that Shields makes? I think they are in Indiana and make boat and race car windshields out of this stuff. Their site is www.racingshields.com, Says its super hard coated-anti fog -chemical resistant. I am considering changing out mine and going to 3/16 something. Any suggestions- Gordon 9168Q > ________________________________ Message 4 _____________________________________ Time: 03:31:03 PM PST US Subject: Re: Windshield was Re: Tailwind-List: Tailight <20050630135355.60652.qmail@web50810.mail.yahoo.com> From: Paul Baron --> Tailwind-List message posted by: Paul Baron Erix- I got it from Total Plastics but same brand. Paul F. Baron Latitude 45, Inc. 231-237-4500 Sent with SnapperMail www.snappermail.com ...... Original Message ....... On Thu, 30 Jun 2005 06:53:55 -0700 (PDT) "Eric Schlanser" wrote: >Paul, Did you get it from Shields or from Total Plastics in Grand Rapids? Eric > >Paul Baron wrote: > Use the ________________________________ Message 5 _____________________________________ Time: 03:31:03 PM PST US Subject: Re: Tailwind-List: Tailight <23416133.1120141826294.JavaMail.root@wamui-darkeyed.atl.sa.earthlink.net> <23416133.1120141826294.JavaMail.root@wamui-darkeyed.atl.sa.earthlink.net> From: Paul Baron --> Tailwind-List message posted by: Paul Baron Jim - I tried heat forming scraps after talking to friends at the marina that do it all the time. It seemed too critical in temp range and in distortion and little micro bubbles. Just put it on cold. Paul F. Baron Latitude 45, Inc. 231-237-4500 Sent with SnapperMail www.snappermail.com ...... Original Message ....... On Thu, 30 Jun 2005 10:30:26 -0400 (EDT) "Jim Wickert" wrote: >--> Tailwind-List message posted by: Jim Wickert > >Paul > >Are you heat forming it or using it in flat panels? If heat forming what has been the temp you are using. Thanks >Jim W > >-----Original Message----- >From: Paul Baron >Sent: Jun 30, 2005 9:21 AM >To: tailwind-list@matronics.com >Subject: Re: Tailwind-List: Tailight > >--> Tailwind-List message posted by: Paul Baron > >That is what I am using now Gordon. The 3/16" matl. No problems so far! > >Paul F. Baron >Latitude 45, Inc. >231-237-4500 > >Sent with SnapperMail >www.snappermail.com > >...... Original Message ....... >On Wed, 29 Jun 2005 17:57:19 -0700 "GORDON PARKER" >wrote: >> >> >>Has any one used the polycarbonate that Shields makes? I think they are >in Indiana and make boat and race car windshields out of this stuff. Their >site is www.racingshields.com, Says its super hard coated-anti fog >-chemical resistant. I am considering changing out mine and going to 3/16 >something. Any suggestions- Gordon 9168Q >> > > > > > > > > > > > >