---------------------------------------------------------- Tailwind-List Digest Archive --- Total Messages Posted Tue 09/20/05: 21 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 07:13 AM - Cabin Venting (Ruhnke, Mike) 2. 07:36 AM - Re: Cabin Venting (DaveM) 3. 07:45 AM - Re: Cabin Venting (Fred Weaver) 4. 07:59 AM - Re: Cabin Venting (Ruhnke, Mike) 5. 07:59 AM - Re: Cabin Venting (Lovelace, Malcolm) 6. 08:06 AM - Re: Cabin Venting (Fred Weaver) 7. 08:29 AM - Re: Cabin Venting (Ruhnke, Mike) 8. 11:31 AM - Re: Cabin Venting (red) 9. 11:36 AM - Re: Cabin Venting (IslPilot@aol.com) 10. 11:39 AM - Re: Cabin Venting (Fred Weaver) 11. 11:45 AM - Re: Cabin Venting (IslPilot@aol.com) 12. 11:49 AM - Re: Cabin Venting (Lovelace, Malcolm) 13. 11:57 AM - Re: Cabin Venting (Fred Weaver) 14. 11:58 AM - Re: Cabin Venting (Fred Weaver) 15. 12:01 PM - Re: Wingless Wonders (IslPilot@aol.com) 16. 12:07 PM - Re: Cabin Venting (owner-tailwind-list-server@matronics.com) 17. 12:08 PM - Re: Cabin Venting (Keith Dornseif) 18. 12:25 PM - Re: Wingless Wonders (Fred Weaver) 19. 07:59 PM - Re: Cabin Venting (George Turner) 20. 10:20 PM - Re: Cabin Venting (red) 21. 11:35 PM - Re: Cabin Venting (Ted Strange) ________________________________ Message 1 _____________________________________ Time: 07:13:56 AM PST US Subject: Tailwind-List: Cabin Venting From: "Ruhnke, Mike" What is the best way to add ventilation to the cabin? Mike NW Illinois ________________________________ Message 2 _____________________________________ Time: 07:36:44 AM PST US From: "DaveM" Subject: Re: Tailwind-List: Cabin Venting The little pop out vents that Jim Clement puts on his work well and when closed are no drag. But the air comes in around your legs. It is better if the cooling air is about chest level. You can also buy plastic NCAA vents that are riveted to the boot cowl skin--work pretty well, air flow is similar to Jim's vents. But for really hot days and good ventilation, the 3" round pop out plastic ones that you can get from the aircraft suppliers and go in a hole in the side window work great, and are adjustable for as much or little air as you want. But when popped out to catch all that air they do add a bit of drag. I have seen similar air catchers in the wing root area on some tailwinds. If you really want to get fancy, you can do like the RV guys do--use an NCAA vent to capture the air from the boot cowl area and duct it up to panel adjustable vent openings. I think Van's sells all the stuff you will need. More expensive and heavier too. My opinions. Dave N168A (Clement side vents) N202Q (great side window vents and boot cowl NCAA vents) ----- Original Message ----- From: Ruhnke, Mike To: tailwind-list@matronics.com Sent: Tuesday, September 20, 2005 7:13 AM Subject: Tailwind-List: Cabin Venting What is the best way to add ventilation to the cabin? Mike NW Illinois ________________________________ Message 3 _____________________________________ Time: 07:45:08 AM PST US From: "Fred Weaver" Subject: Re: Tailwind-List: Cabin Venting Yo Runk.... scoops do the best job. Whatever you do, don't do the NACA ducts. The sides of the Tailwind are in a static zone and the air won't come in unless you slip the plane a little. Here again is where Clement shines. He makes a cool little scoop that opens and closes without a lot of gadgetry. I'm betting he will take a couple of pictures for you. Weav ----- Original Message ----- From: Ruhnke, Mike To: tailwind-list@matronics.com Sent: Tuesday, September 20, 2005 7:13 AM Subject: Tailwind-List: Cabin Venting What is the best way to add ventilation to the cabin? Mike NW Illinois ________________________________ Message 4 _____________________________________ Time: 07:59:25 AM PST US Subject: RE: Tailwind-List: Cabin Venting From: "Ruhnke, Mike" Thanks for the advice Weav. Glad to see your still around! No posts in a while... I was getting worried. Don't archive -----Original Message----- From: owner-tailwind-list-server@matronics.com [mailto:owner-tailwind-list-server@matronics.com]On Behalf Of Fred Weaver Subject: Re: Tailwind-List: Cabin Venting Yo Runk.... scoops do the best job. Whatever you do, don't do the NACA ducts. The sides of the Tailwind are in a static zone and the air won't come in unless you slip the plane a little. Here again is where Clement shines. He makes a cool little scoop that opens and closes without a lot of gadgetry. I'm betting he will take a couple of pictures for you. Weav ----- Original Message ----- From: Ruhnke, Mike Subject: Tailwind-List: Cabin Venting What is the best way to add ventilation to the cabin? Mike NW Illinois ________________________________ Message 5 _____________________________________ Time: 07:59:41 AM PST US Subject: RE: Tailwind-List: Cabin Venting From: "Lovelace, Malcolm" --> Tailwind-List message posted by: "Lovelace, Malcolm" I have small NACA ducts on mine and they work great. I have all the air I need. Malcolm > -----Original Message----- > From: Fred Weaver [SMTP:Mytyweav@earthlink.net] > Sent: Tuesday, September 20, 2005 10:45 AM > To: tailwind-list@matronics.com > Subject: Re: Tailwind-List: Cabin Venting > > Yo Runk.... scoops do the best job. Whatever you do, don't do the NACA ducts. The sides of the Tailwind are in a static zone and the air won't come in unless you slip the plane a little. Here again is where Clement shines. He makes a cool little scoop that opens and closes without a lot of gadgetry. I'm betting he will take a couple of pictures for you. > Weav > > ----- Original Message ----- > From: Ruhnke, Mike > To: tailwind-list@matronics.com > Sent: Tuesday, September 20, 2005 7:13 AM > Subject: Tailwind-List: Cabin Venting > > What is the best way to add ventilation to the cabin? > > Mike NW Illinois > ________________________________ Message 6 _____________________________________ Time: 08:06:00 AM PST US From: "Fred Weaver" Subject: Re: Tailwind-List: Cabin Venting Mike.... Not many Tailwind guys hanging out on the Matronics list. For some unknown reason, they prefer the Yahoo format. ----- Original Message ----- From: Ruhnke, Mike To: tailwind-list@matronics.com Sent: Tuesday, September 20, 2005 7:58 AM Subject: RE: Tailwind-List: Cabin Venting Thanks for the advice Weav. Glad to see your still around! No posts in a while... I was getting worried. Don't archive -----Original Message----- From: owner-tailwind-list-server@matronics.com [mailto:owner-tailwind-list-server@matronics.com]On Behalf Of Fred Weaver Sent: Tuesday, September 20, 2005 9:45 AM To: tailwind-list@matronics.com Subject: Re: Tailwind-List: Cabin Venting Yo Runk.... scoops do the best job. Whatever you do, don't do the NACA ducts. The sides of the Tailwind are in a static zone and the air won't come in unless you slip the plane a little. Here again is where Clement shines. He makes a cool little scoop that opens and closes without a lot of gadgetry. I'm betting he will take a couple of pictures for you. Weav ----- Original Message ----- From: Ruhnke, Mike To: tailwind-list@matronics.com Sent: Tuesday, September 20, 2005 7:13 AM Subject: Tailwind-List: Cabin Venting What is the best way to add ventilation to the cabin? Mike NW Illinois ________________________________ Message 7 _____________________________________ Time: 08:29:44 AM PST US Subject: RE: Tailwind-List: Cabin Venting From: "Ruhnke, Mike" Well enough of you good-ole boys are still around to provide excellent advice. Without fail whenever I have a question you guys have several answers! Can't tell you how much easier having this tailwind list makes building on of these things. Do not archive -----Original Message----- From: owner-tailwind-list-server@matronics.com [mailto:owner-tailwind-list-server@matronics.com]On Behalf Of Fred Weaver Subject: Re: Tailwind-List: Cabin Venting Mike.... Not many Tailwind guys hanging out on the Matronics list. For some unknown reason, they prefer the Yahoo format. ----- Original Message ----- From: Ruhnke, Mike Subject: RE: Tailwind-List: Cabin Venting Thanks for the advice Weav. Glad to see your still around! No posts in a while... I was getting worried. Don't archive -----Original Message----- From: owner-tailwind-list-server@matronics.com [mailto:owner-tailwind-list-server@matronics.com]On Behalf Of Fred Weaver Subject: Re: Tailwind-List: Cabin Venting Yo Runk.... scoops do the best job. Whatever you do, don't do the NACA ducts. The sides of the Tailwind are in a static zone and the air won't come in unless you slip the plane a little. Here again is where Clement shines. He makes a cool little scoop that opens and closes without a lot of gadgetry. I'm betting he will take a couple of pictures for you. Weav ----- Original Message ----- From: Ruhnke, Mike Subject: Tailwind-List: Cabin Venting What is the best way to add ventilation to the cabin? Mike NW Illinois ________________________________ Message 8 _____________________________________ Time: 11:31:41 AM PST US From: "red" Subject: Re: Tailwind-List: Cabin Venting Take Weaver for a ride ; ) Red ----- Original Message ----- From: Ruhnke, Mike To: tailwind-list@matronics.com Sent: Tuesday, September 20, 2005 7:13 AM Subject: Tailwind-List: Cabin Venting What is the best way to add ventilation to the cabin? Mike NW Illinois ________________________________ Message 9 _____________________________________ Time: 11:36:05 AM PST US From: IslPilot@aol.com Subject: Re: Tailwind-List: Cabin Venting Van's carries some the same window vents that I paid almost $100 a piece for considerably cheaper. So check their catalog first, unlike myself........... They work great and are flush when closed, Forest had put them in N374D so I had to have them after seeing how well they worked for Jim Lindner. Sorry I don't have the exact part numbers and prices. Paul Paul F. Baron CVX ________________________________ Message 10 ____________________________________ Time: 11:39:48 AM PST US From: "Fred Weaver" Subject: Re: Tailwind-List: Cabin Venting Mike....I just went thru a million pictures hoping to have one that shows the details. No luck...so I will take a few today when I get to the airport. Weav ----- Original Message ----- From: Ruhnke, Mike To: tailwind-list@matronics.com Sent: Tuesday, September 20, 2005 8:29 AM Subject: RE: Tailwind-List: Cabin Venting Well enough of you good-ole boys are still around to provide excellent advice. Without fail whenever I have a question you guys have several answers! Can't tell you how much easier having this tailwind list makes building on of these things. Do not archive -----Original Message----- From: owner-tailwind-list-server@matronics.com [mailto:owner-tailwind-list-server@matronics.com]On Behalf Of Fred Weaver Sent: Tuesday, September 20, 2005 10:06 AM To: tailwind-list@matronics.com Subject: Re: Tailwind-List: Cabin Venting Mike.... Not many Tailwind guys hanging out on the Matronics list. For some unknown reason, they prefer the Yahoo format. ----- Original Message ----- From: Ruhnke, Mike To: tailwind-list@matronics.com Sent: Tuesday, September 20, 2005 7:58 AM Subject: RE: Tailwind-List: Cabin Venting Thanks for the advice Weav. Glad to see your still around! No posts in a while... I was getting worried. Don't archive -----Original Message----- From: owner-tailwind-list-server@matronics.com [mailto:owner-tailwind-list-server@matronics.com]On Behalf Of Fred Weaver Sent: Tuesday, September 20, 2005 9:45 AM To: tailwind-list@matronics.com Subject: Re: Tailwind-List: Cabin Venting Yo Runk.... scoops do the best job. Whatever you do, don't do the NACA ducts. The sides of the Tailwind are in a static zone and the air won't come in unless you slip the plane a little. Here again is where Clement shines. He makes a cool little scoop that opens and closes without a lot of gadgetry. I'm betting he will take a couple of pictures for you. Weav ----- Original Message ----- From: Ruhnke, Mike To: tailwind-list@matronics.com Sent: Tuesday, September 20, 2005 7:13 AM Subject: Tailwind-List: Cabin Venting What is the best way to add ventilation to the cabin? Mike NW Illinois ________________________________ Message 11 ____________________________________ Time: 11:45:49 AM PST US From: IslPilot@aol.com Subject: Re: Tailwind-List: Cabin Venting Quick wit Red! Paul Paul F. Baron CVX ________________________________ Message 12 ____________________________________ Time: 11:49:10 AM PST US Subject: RE: Tailwind-List: Cabin Venting From: "Lovelace, Malcolm" Here are some. <> <> > -----Original Message----- > From: Fred Weaver [SMTP:Mytyweav@earthlink.net] > Sent: Tuesday, September 20, 2005 2:39 PM > To: tailwind-list@matronics.com > Subject: Re: Tailwind-List: Cabin Venting > > Mike....I just went thru a million pictures hoping to have one that shows the details. No luck...so I will take a few today when I get to the airport. > Weav > > ----- Original Message ----- > From: Ruhnke, Mike > To: tailwind-list@matronics.com > Sent: Tuesday, September 20, 2005 8:29 AM > Subject: RE: Tailwind-List: Cabin Venting > > Well enough of you good-ole boys are still around to provide excellent advice. Without fail whenever I have a question you guys have several answers! > > Can't tell you how much easier having this tailwind list makes building on of these things. > > Do not archive > > -----Original Message----- > From: owner-tailwind-list-server@matronics.com [mailto:owner-tailwind-list-server@matronics.com]On Behalf Of Fred Weaver > Sent: Tuesday, September 20, 2005 10:06 AM > To: tailwind-list@matronics.com > Subject: Re: Tailwind-List: Cabin Venting > =09 > =09 > Mike.... Not many Tailwind guys hanging out on the Matronics list. For some unknown reason, they prefer the Yahoo format. > > ----- Original Message ----- > From: Ruhnke, Mike > To: tailwind-list@matronics.com > Sent: Tuesday, September 20, 2005 7:58 AM > Subject: RE: Tailwind-List: Cabin Venting > > Thanks for the advice Weav. Glad to see your still around! No posts in a while... I was getting worried. > > Don't archive > > > -----Original Message----- > From: owner-tailwind-list-server@matronics.com [mailto:owner-tailwind-list-server@matronics.com]On Behalf Of Fred Weaver > Sent: Tuesday, September 20, 2005 9:45 AM > To: tailwind-list@matronics.com > Subject: Re: Tailwind-List: Cabin Venting > =09 > =09 > Yo Runk.... scoops do the best job. Whatever you do, don't do the NACA ducts. The sides of the Tailwind are in a static zone and the air won't come in unless you slip the plane a little. Here again is where Clement shines. He makes a cool little scoop that opens and closes without a lot of gadgetry. I'm betting he will take a couple of pictures for you. > Weav > > ----- Original Message ----- > From: Ruhnke, Mike > To: tailwind-list@matronics.com > Sent: Tuesday, September 20, 2005 7:13 AM > Subject: Tailwind-List: Cabin Venting > > What is the best way to add ventilation to the cabin? > > Mike NW Illinois > ________________________________ Message 13 ____________________________________ Time: 11:57:55 AM PST US From: "Fred Weaver" Subject: Re: Tailwind-List: Cabin Venting --> Tailwind-List message posted by: "Fred Weaver" Thanks Malcolm! ----- Original Message ----- From: "Lovelace, Malcolm" Subject: RE: Tailwind-List: Cabin Venting Here are some. <> <> ________________________________ Message 14 ____________________________________ Time: 11:58:46 AM PST US From: "Fred Weaver" Subject: Re: Tailwind-List: Cabin Venting No comment...... :) ----- Original Message ----- From: IslPilot@aol.com To: tailwind-list@matronics.com Sent: Tuesday, September 20, 2005 11:45 AM Subject: Re: Tailwind-List: Cabin Venting Quick wit Red! Paul Paul F. Baron CVX ________________________________ Message 15 ____________________________________ Time: 12:01:01 PM PST US From: IslPilot@aol.com Subject: Re: Tailwind-List: Wingless Wonders Weav: How is the wing install doing? Are you off the crutches so that you can get something accomplished? Do not archive. Paul Paul F. Baron CVX ________________________________ Message 16 ____________________________________ Time: 12:07:17 PM PST US Subject: RE: Tailwind-List: Cabin Venting --> Tailwind-List message posted by: "Ruhnke, Mike" Nice! Maybe my third tailwind will look that nice. :) -----Original Message----- From: owner-tailwind-list-server@matronics.com [mailto:owner-tailwind-list-server@matronics.com]On Behalf Of Lovelace, Malcolm Subject: RE: Tailwind-List: Cabin Venting Here are some. <> <> > -----Original Message----- > From: Fred Weaver [SMTP:Mytyweav@earthlink.net] > Sent: Tuesday, September 20, 2005 2:39 PM > To: tailwind-list@matronics.com > Subject: Re: Tailwind-List: Cabin Venting > > Mike....I just went thru a million pictures hoping to have one that shows the details. No luck...so I will take a few today when I get to the airport. > Weav > > ----- Original Message ----- > From: Ruhnke, Mike > To: tailwind-list@matronics.com > Sent: Tuesday, September 20, 2005 8:29 AM > Subject: RE: Tailwind-List: Cabin Venting > > Well enough of you good-ole boys are still around to provide excellent advice. Without fail whenever I have a question you guys have several answers! > > Can't tell you how much easier having this tailwind list makes building on of these things. > > Do not archive > > -----Original Message----- > From: owner-tailwind-list-server@matronics.com [mailto:owner-tailwind-list-server@matronics.com]On Behalf Of Fred Weaver > Sent: Tuesday, September 20, 2005 10:06 AM > To: tailwind-list@matronics.com > Subject: Re: Tailwind-List: Cabin Venting > > > Mike.... Not many Tailwind guys hanging out on the Matronics list. For some unknown reason, they prefer the Yahoo format. > > ----- Original Message ----- > From: Ruhnke, Mike > To: tailwind-list@matronics.com > Sent: Tuesday, September 20, 2005 7:58 AM > Subject: RE: Tailwind-List: Cabin Venting > > Thanks for the advice Weav. Glad to see your still around! No posts in a while... I was getting worried. > > Don't archive > > > -----Original Message----- > From: owner-tailwind-list-server@matronics.com [mailto:owner-tailwind-list-server@matronics.com]On Behalf Of Fred Weaver > Sent: Tuesday, September 20, 2005 9:45 AM > To: tailwind-list@matronics.com > Subject: Re: Tailwind-List: Cabin Venting > > > Yo Runk.... scoops do the best job. Whatever you do, don't do the NACA ducts. The sides of the Tailwind are in a static zone and the air won't come in unless you slip the plane a little. Here again is where Clement shines. He makes a cool little scoop that opens and closes without a lot of gadgetry. I'm betting he will take a couple of pictures for you. > Weav > > ----- Original Message ----- > From: Ruhnke, Mike > To: tailwind-list@matronics.com > Sent: Tuesday, September 20, 2005 7:13 AM > Subject: Tailwind-List: Cabin Venting > > What is the best way to add ventilation to the cabin? > > Mike NW Illinois > ________________________________ Message 17 ____________________________________ Time: 12:08:19 PM PST US From: "Keith Dornseif" Subject: RE: Tailwind-List: Cabin Venting --> Tailwind-List message posted by: "Keith Dornseif" Just ordered a set from vans. http://www.vansaircraft.com/cgi-bin/catalog.cgi?ident=1127243032-338-684&bro wse=heatvent&product=10vent_kit Keith Dornseif keith@dornseif.net -----Original Message----- From: owner-tailwind-list-server@matronics.com [mailto:owner-tailwind-list-server@matronics.com]On Behalf Of Lovelace, Malcolm Subject: RE: Tailwind-List: Cabin Venting Here are some. <> <> > -----Original Message----- > From: Fred Weaver [SMTP:Mytyweav@earthlink.net] > Sent: Tuesday, September 20, 2005 2:39 PM > To: tailwind-list@matronics.com > Subject: Re: Tailwind-List: Cabin Venting > > Mike....I just went thru a million pictures hoping to have one that shows the details. No luck...so I will take a few today when I get to the airport. > Weav > > ----- Original Message ----- > From: Ruhnke, Mike > To: tailwind-list@matronics.com > Sent: Tuesday, September 20, 2005 8:29 AM > Subject: RE: Tailwind-List: Cabin Venting > > Well enough of you good-ole boys are still around to provide excellent advice. Without fail whenever I have a question you guys have several answers! > > Can't tell you how much easier having this tailwind list makes building on of these things. > > Do not archive > > -----Original Message----- > From: owner-tailwind-list-server@matronics.com [mailto:owner-tailwind-list-server@matronics.com]On Behalf Of Fred Weaver > Sent: Tuesday, September 20, 2005 10:06 AM > To: tailwind-list@matronics.com > Subject: Re: Tailwind-List: Cabin Venting > > > Mike.... Not many Tailwind guys hanging out on the Matronics list. For some unknown reason, they prefer the Yahoo format. > > ----- Original Message ----- > From: Ruhnke, Mike > To: tailwind-list@matronics.com > Sent: Tuesday, September 20, 2005 7:58 AM > Subject: RE: Tailwind-List: Cabin Venting > > Thanks for the advice Weav. Glad to see your still around! No posts in a while... I was getting worried. > > Don't archive > > > -----Original Message----- > From: owner-tailwind-list-server@matronics.com [mailto:owner-tailwind-list-server@matronics.com]On Behalf Of Fred Weaver > Sent: Tuesday, September 20, 2005 9:45 AM > To: tailwind-list@matronics.com > Subject: Re: Tailwind-List: Cabin Venting > > > Yo Runk.... scoops do the best job. Whatever you do, don't do the NACA ducts. The sides of the Tailwind are in a static zone and the air won't come in unless you slip the plane a little. Here again is where Clement shines. He makes a cool little scoop that opens and closes without a lot of gadgetry. I'm betting he will take a couple of pictures for you. > Weav > > ----- Original Message ----- > From: Ruhnke, Mike > To: tailwind-list@matronics.com > Sent: Tuesday, September 20, 2005 7:13 AM > Subject: Tailwind-List: Cabin Venting > > What is the best way to add ventilation to the cabin? > > Mike NW Illinois > ________________________________ Message 18 ____________________________________ Time: 12:25:17 PM PST US From: "Fred Weaver" Subject: Re: Tailwind-List: Wingless Wonders No crutches at this time. Yep, getting stuff done here. October 22 will be here in no time. ----- Original Message ----- From: IslPilot@aol.com To: tailwind-list@matronics.com Sent: Tuesday, September 20, 2005 12:00 PM Subject: Re: Tailwind-List: Wingless Wonders Weav: How is the wing install doing? Are you off the crutches so that you can get something accomplished? Do not archive. Paul Paul F. Baron CVX ________________________________ Message 19 ____________________________________ Time: 07:59:32 PM PST US From: George Turner Subject: Re: Tailwind-List: Cabin Venting Fred, We like Yahoo for the adds. Fred Weaver wrote:Mike.... Not many Tailwind guys hanging out on the Matronics list. For some unknown reason, they prefer the Yahoo format. ----- Original Message ----- From: Ruhnke, Mike Subject: RE: Tailwind-List: Cabin Venting Thanks for the advice Weav. Glad to see your still around! No posts in a while... I was getting worried. Don't archive -----Original Message----- From: owner-tailwind-list-server@matronics.com [mailto:owner-tailwind-list-server@matronics.com]On Behalf Of Fred Weaver Subject: Re: Tailwind-List: Cabin Venting Yo Runk.... scoops do the best job. Whatever you do, don't do the NACA ducts. The sides of the Tailwind are in a static zone and the air won't come in unless you slip the plane a little. Here again is where Clement shines. He makes a cool little scoop that opens and closes without a lot of gadgetry. I'm betting he will take a couple of pictures for you. Weav ----- Original Message ----- From: Ruhnke, Mike Subject: Tailwind-List: Cabin Venting What is the best way to add ventilation to the cabin? Mike NW Illinois --------------------------------- Click here to donate to the Hurricane Katrina relief effort. ________________________________ Message 20 ____________________________________ Time: 10:20:15 PM PST US From: "red" Subject: Re: Tailwind-List: Cabin Venting George, I don't get the ads, how can I see them? Red ----- Original Message ----- From: George Turner To: tailwind-list@matronics.com Sent: Tuesday, September 20, 2005 7:58 PM Subject: Re: Tailwind-List: Cabin Venting Fred, We like Yahoo for the adds. Fred Weaver wrote: Mike.... Not many Tailwind guys hanging out on the Matronics list. For some unknown reason, they prefer the Yahoo format. ----- Original Message ----- From: Ruhnke, Mike To: tailwind-list@matronics.com Sent: Tuesday, September 20, 2005 7:58 AM Subject: RE: Tailwind-List: Cabin Venting Thanks for the advice Weav. Glad to see your still around! No posts in a while... I was getting worried. Don't archive -----Original Message----- From: owner-tailwind-list-server@matronics.com [mailto:owner-tailwind-list-server@matronics.com]On Behalf Of Fred Weaver Sent: Tuesday, September 20, 2005 9:45 AM To: tailwind-list@matronics.com Subject: Re: Tailwind-List: Cabin Venting Yo Runk.... scoops do the best job. Whatever you do, don't do the NACA ducts. The sides of the Tailwind are in a static zone and the air won't come in unless you slip the plane a little. Here again is where Clement shines. He makes a cool little scoop that opens and closes without a lot of gadgetry. I'm betting he will take a couple of pictures for you. Weav ----- Original Message ----- From: Ruhnke, Mike To: tailwind-list@matronics.com Sent: Tuesday, September 20, 2005 7:13 AM Subject: Tailwind-List: Cabin Venting What is the best way to add ventilation to the cabin? Mike NW Illinois Click here to donate to the Hurricane Katrina relief effort. ________________________________ Message 21 ____________________________________ Time: 11:35:49 PM PST US From: Ted Strange Subject: Re: Tailwind-List: Cabin Venting --> Tailwind-List message posted by: Ted Strange Keith Dornseif wrote: >--> Tailwind-List message posted by: "Keith Dornseif" > >Just ordered a set from vans. > >http://www.vansaircraft.com/cgi-bin/catalog.cgi?ident=1127243032-338-684&bro >wse=heatvent&product=10vent_kit > > >Keith Dornseif >keith@dornseif.net > >-----Original Message----- >From: owner-tailwind-list-server@matronics.com >[mailto:owner-tailwind-list-server@matronics.com]On Behalf Of Lovelace, >Malcolm >Sent: Tuesday, September 20, 2005 1:41 PM >To: tailwind-list@matronics.com >Subject: RE: Tailwind-List: Cabin Venting > >Here are some. > > <> <> > > > >>-----Original Message----- >>From: Fred Weaver [SMTP:Mytyweav@earthlink.net] >>Sent: Tuesday, September 20, 2005 2:39 PM >>To: tailwind-list@matronics.com >>Subject: Re: Tailwind-List: Cabin Venting >> >>Mike....I just went thru a million pictures hoping to have one that shows >> >> >the details. No luck...so I will take a few today when I get to the airport. > > >>Weav >> >> ----- Original Message ----- >> From: Ruhnke, Mike >> To: tailwind-list@matronics.com >> Sent: Tuesday, September 20, 2005 8:29 AM >> Subject: RE: Tailwind-List: Cabin Venting >> >> Well enough of you good-ole boys are still around to provide >> >> >excellent advice. Without fail whenever I have a question you guys have >several answers! > > >> Can't tell you how much easier having this tailwind list makes >> >> >building on of these things. > > >> Do not archive >> >> -----Original Message----- >> From: owner-tailwind-list-server@matronics.com >> >> > >[mailto:owner-tailwind-list-server@matronics.com]On Behalf Of Fred Weaver > > >> Sent: Tuesday, September 20, 2005 10:06 AM >> To: tailwind-list@matronics.com >> Subject: Re: Tailwind-List: Cabin Venting >> >> >> Mike.... Not many Tailwind guys hanging out on the >> >> >Matronics list. For some unknown reason, they prefer the Yahoo format. > > >> ----- Original Message ----- >> From: Ruhnke, Mike >> >> > > > >> To: tailwind-list@matronics.com >> >> > > > >> Sent: Tuesday, September 20, 2005 7:58 AM >> Subject: RE: Tailwind-List: Cabin Venting >> >> Thanks for the advice Weav. Glad to see your still >> >> >around! No posts in a while... I was getting worried. > > >> Don't archive >> >> >> -----Original Message----- >> From: >> >> >owner-tailwind-list-server@matronics.com > >[mailto:owner-tailwind-list-server@matronics.com]On Behalf Of Fred Weaver > > >> Sent: Tuesday, September 20, 2005 9:45 AM >> To: tailwind-list@matronics.com >> >> > > > >> Subject: Re: Tailwind-List: Cabin Venting >> >> >> Yo Runk.... scoops do the best job. >> >> >Whatever you do, don't do the NACA ducts. The sides of the Tailwind are in a >static zone and the air won't come in unless you slip the plane a little. >Here again is where Clement shines. He makes a cool little scoop that opens >and closes without a lot of gadgetry. I'm betting he will take a couple of >pictures for you. > > >> Weav >> >> ----- Original Message ----- >> From: Ruhnke, Mike >> >> > > > >> To: tailwind-list@matronics.com >> >> > > > >> Sent: Tuesday, September 20, 2005 7:13 AM >> Subject: Tailwind-List: Cabin Venting >> >> What is the best way to add ventilation to >> >> >the cabin? > > >> Mike NW Illinois >> >> >> > > >Keith: > > I didnt kmow you had a Tailwind too. The pulleys arrived today. Thanks. > > > > > > >