----------------------------------------------------------
                           Tailwind-List Digest Archive
                                      ---
                     Total Messages Posted Thu 09/22/05: 6
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 10:15 AM - Mic jack  (Ruhnke, Mike)
     2. 11:17 AM - Re: Mic jack  (Callbie Wood)
     3. 04:43 PM - Ivo Props  (Ted Strange)
     4. 06:44 PM - Re: Ivo Props  (Bob Conner)
     5. 08:33 PM - Re: Ivo Props  (Fred Weaver)
     6. 09:59 PM - Re: Ivo Props  (red)
 
 
 
________________________________  Message 1  _____________________________________


Time: 10:15:44 AM PST US
Subject: Tailwind-List: Mic jack
From: "Ruhnke, Mike" <mike.ruhnke@spectrumbrands.com>

I can't find a source for the small jack used to plug the microphone into.

Thanks
Mike

Do not Archive

________________________________  Message 2  _____________________________________


Time: 11:17:22 AM PST US
From: "Callbie Wood" <jncwood@bbnp.com>
Subject: Re: Tailwind-List: Mic jack

Try aircraft spruce...it's in their catalog
jncwood@bbnp.com
  ----- Original Message -----
  From: Ruhnke, Mike
  To: tailwind-list@matronics.com
  Sent: Thursday, September 22, 2005 1:15 PM
  Subject: Tailwind-List: Mic jack


  I can't find a source for the small jack used to plug the microphone into.

  Thanks
  Mike

  Do not Archive
________________________________  Message 3  _____________________________________


Time: 04:43:48 PM PST US
From: Ted Strange <tedstrange@shaw.ca>
Subject: Tailwind-List: Ivo Props

--> Tailwind-List message posted by: Ted Strange <tedstrange@shaw.ca>

Can I have some pros and cons on an Ivo prop for a C-90?


________________________________  Message 4  _____________________________________


Time: 06:44:31 PM PST US
From: "Bob Conner" <bdconner@hotmail.com>
Subject: RE: Tailwind-List: Ivo Props

This one was on a 0-290. Might be ok on a C-90 but I won't ever use one 
again.........Bob 149

>From: Ted Strange <tedstrange@shaw.ca>
>Reply-To: tailwind-list@matronics.com
>To: "tailwind-list@matronics.com" <tailwind-list@matronics.com>
>Subject: Tailwind-List: Ivo Props
>Date: Thu, 22 Sep 2005 16:42:47 -0700
>
>--> Tailwind-List message posted by: Ted Strange <tedstrange@shaw.ca>
>
>Can I have some pros and cons on an Ivo prop for a C-90?
>
>


________________________________  Message 5  _____________________________________


Time: 08:33:43 PM PST US
From: "Fred Weaver" <Mytyweav@earthlink.net>
Subject: Re: Tailwind-List: Ivo Props

--> Tailwind-List message posted by: "Fred Weaver" <Mytyweav@earthlink.net>

They suck!  You would be better off with a Kiev or Warp Drive....
----- Original Message ----- 
From: "Ted Strange" <tedstrange@shaw.ca>
Subject: Tailwind-List: Ivo Props


> --> Tailwind-List message posted by: Ted Strange <tedstrange@shaw.ca>
> 
> Can I have some pros and cons on an Ivo prop for a C-90?
> 
> 
> 
> 
> 
> 
>  
>  
>  
> 
> 


________________________________  Message 6  _____________________________________


Time: 09:59:29 PM PST US
From: "red" <redswing@mcn.org>
Subject: Re: Tailwind-List: Ivo Props

Lots of people won't ever use an Ivo prop again.
Red

  ----- Original Message -----
  From: Bob Conner
  To: tailwind-list@matronics.com
  Sent: Thursday, September 22, 2005 6:44 PM
  Subject: RE: Tailwind-List: Ivo Props


  This one was on a 0-290. Might be ok on a C-90 but I won't ever use one
  again.........Bob 149

  >From: Ted Strange <tedstrange@shaw.ca>
  >Reply-To: tailwind-list@matronics.com
  >To: "tailwind-list@matronics.com" <tailwind-list@matronics.com>
  >Subject: Tailwind-List: Ivo Props
  >Date: Thu, 22 Sep 2005 16:42:47 -0700
  >
  >--> Tailwind-List message posted by: Ted Strange <tedstrange@shaw.ca>
  >
  >Can I have some pros and cons on an Ivo prop for a C-90?
  >
  >
  >
  >
  >
  >
  >
  >
  >
  >
  >