----------------------------------------------------------
                           Tailwind-List Digest Archive
                                      ---
                     Total Messages Posted Sun 03/26/06: 2
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 04:47 AM - Sumps & carbs  (Robert Ardis)
     2. 05:51 AM - Re: Sumps & carbs  (dmagaw@att.net)
 
 
 
________________________________  Message 1  _____________________________________


Time: 04:47:40 AM PST US
From: "Robert Ardis" <ardis_rb@hotmail.com>
Subject: Tailwind-List: Sumps & carbs

--> Tailwind-List message posted by: "Robert Ardis" <ardis_rb@hotmail.com>

ADVICE NEEDED----
     i have had Tailwind N4090K since about '75.  I fitted it with a GPU 
(0-290) and used a
0-320 sump and a MA3 carb but didn't work well and eventually friend traded 
me a sump
the the carb would fit.
     I started a rebuild and modification about 10 years ago and am now 
about to hang
a 0-320 that has a sump with the 'flared' riser.  The opening in the sump is 
2.4" across
but the carb, a MS MA4SPA (10-5009) is only 2" but will fit.
     I would appreciate any imput as to the 'right' carb (part #)  to use 
with the 'flared'
riser.  I have a O-320 sump with a straight riser but not sure the 10-5009 
is for it
     I would appreciate any and all information.
THANKS


________________________________  Message 2  _____________________________________


Time: 05:51:34 AM PST US
From: dmagaw@att.net
Subject: Re: Tailwind-List: Sumps & carbs

Robert:
I don't know the answer to your questions, but you might get a better response
to your questions in the "Lycoming" Yahoo Group which has some very helpful and
knowledgable people responding on it.
http://groups.yahoo.com/group/lycoming/
Dave M
> --> Tailwind-List message posted by: "Robert Ardis" 
> 
> ADVICE NEEDED---- 
> i have had Tailwind N4090K since about '75. I fitted it with a GPU 
> (0-290) and used a 
> 0-320 sump and a MA3 carb but didn't work well and eventually friend traded 
> me a sump 
> the the carb would fit. 
> I started a rebuild and modification about 10 years ago and am now 
> about to hang 
> a 0-320 that has a sump with the 'flared' riser. The opening in the sump is 
> 2.4" across 
> but the carb, a MS MA4SPA (10-5009) is only 2" but will fit. 
> I would appreciate any imput as to the 'right' carb (part #) to use 
> with the 'flared' 
> riser. I have a O-320 sump with a straight riser but not sure the 10-5009 
> is for it 
> I would appreciate any and all information. 
> THANKS 
> 
> _________________________________________________________________ 

<!-- BEGIN WEBMAIL STATIONERY -->


<!-- WEBMAIL STATIONERY noneset -->


Robert:


I don't know the answer to your questions, but you might get a better response
to your questions in the "Lycoming" Yahoo Group which has some very helpful and
knowledgable people responding on it.
http://groups.yahoo.com/group/lycoming/


Dave M


 -- Tailwind-List message posted by: "Robert Ardis" <ARDIS_RB@HOTMAIL.COM>

 ADVICE NEEDED---- 
 i have had Tailwind N4090K since about '75. I fitted it with a GPU 
 (0-290) and used a 
 0-320 sump and a MA3 carb but didn't work well and eventually friend traded 
 me a sump 
 the the carb would fit. 
 I started a rebuild and modification about 10 years ago and am now 
 about to hang 
 a 0-320 that has a sump with the 'flared' riser. The opening in the sump is 
 2.4" across 
 but the carb, a MS MA4SPA (10-5009) is only 2" but will fit. 
 I would appreciate any imput as to the 'right' carb (part #) to use 
 with the 'flared' 
 riser. I have a O-320 sump with a straight riser but not sure the 10-5009 
 is for it 
 I would appreciate any and all information. 

 THANKS


 _________________________________________________________________ 

<!-- END WEBMAIL STATIONERY -->