---------------------------------------------------------- Tailwind-List Digest Archive --- Total Messages Posted Wed 05/31/06: 1 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 11:55 PM - New Thread (Brian Alley) ________________________________ Message 1 _____________________________________ Time: 11:55:19 PM PST US From: Brian Alley Subject: Tailwind-List: New Thread Not wishing to point a finger or blast any specific person, I'm starting a new Thread on the epoxy filler subject. I've worked with epoxy, polyester and vynlester resins with wood, fiberglass and carbon fiber everyday for the last five years. I have some very interesting insight as to what is proper technique. Anyone who recommends poor technique as acceptable just because you got away with it so far, is totally irresponsible. There are several new builders on this list looking for answeres, correct answeres!!! Please consider that others may take your advice, right or wrong. I stand buy my statement concerning the use of micro, silica or any other light weight filler used to thicken epoxy as poor technique in structural bonds. Anyone with questions or comments is welcome to contact me on or off list or by phone. BRIAN ALLEY (N320WT) CARBON FIBER COMPOSITES 101 Caroline Circle Hurricane, WV 25526 www.carbonfibercomposites.net 304-562-6800 home 304-395-4932 cell How are you going to win by a nose if you don't stick out your neck?