Today's Message Index:
----------------------
1. 04:28 AM - Re: Front Spar Carry Through (Jim Clement)
2. 07:04 PM - Re: Front Spar Carry Through (Rcaprd@AOL.COM)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Front Spar Carry Through |
--> Tailwind-List message posted by: "Jim Clement" <jclement000@centurytel.net>
Chuck, cut out the mistake and weld in new tubing, easy to do at this stage.
Jim C
----- Original Message -----
Sent: Tuesday, June 20, 2006 1:50 AM
> Jim C. and all,
> I've been welding up the fuselage, and discovered a mistake that I made
> when
> I laid out the sides. It seems the front spar carry through came out
> about
> 2" behind the top of the triangle windows at each side of the windshield.
> I'm
> thinking of adding a piece of 3/4 X .035 from the underside of the carry
> through, to the mid door location. The other alternative is to cut the
> tubing at
> the windshield slant, and the forward upper door opening, and splice
> pieces to
> put it back to plans. Or, cut those pieces out altogether, and weld new
> ones
> in. The front spar carry through is just tac welded in. What do you guys
> think ? I'm including a picture.
>
> Chuck Gantzer
> Wichita, KS
> Pietenpol NX770CG
>
--------------------------------------------------------------------------------
>
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Front Spar Carry Through |
--> Tailwind-List message posted by: Rcaprd@aol.com
In a message dated 6/20/2006 6:28:40 AM Central Standard Time,
jclement000@centurytel.net writes:
Chuck, cut out the mistake and weld in new tubing, easy to do at this stage.
Jim C
Will do. Thanks, Jim.
Chuck G.
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|