Today's Message Index:
----------------------
1. 07:42 AM - Stringers (Rcaprd@aol.com)
2. 03:49 PM - Re: Stringers (Jim Clement)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
The plans, and Jim C, both call out for 1/2 X .035 aluminum stringers.
I picked up some smaller dia tube - 6 pieces 10' long, at the Yard Store here
in Wichita for about $10. It measures between 5/16 and 3/8 X .035 (might be
metric). Would this be all right for the stringers ?
Chuck G.
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> Tailwind-List message posted by: "Jim Clement" <jclement000@centurytel.net>
Should work, I used 3/8" X .028 and it worked ok. Anchor it down a little
more than using 1/2". Jim C
----- Original Message -----
From: <Rcaprd@aol.com>
Sent: Thursday, October 19, 2006 3:06 AM
Subject: Tailwind-List: Stringers
> The plans, and Jim C, both call out for 1/2 X .035 aluminum stringers.
> I picked up some smaller dia tube - 6 pieces 10' long, at the Yard Store
> here
> in Wichita for about $10. It measures between 5/16 and 3/8 X .035 (might
> be
> metric). Would this be all right for the stringers ?
>
> Chuck G.
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|