----------------------------------------------------------
                           Tailwind-List Digest Archive
                                      ---
                     Total Messages Posted Thu 10/19/06: 2
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 07:42 AM - Stringers  (Rcaprd@aol.com)
     2. 03:49 PM - Re: Stringers  (Jim Clement)
 
 
 
________________________________  Message 1  _____________________________________


Time: 07:42:57 AM PST US
From: Rcaprd@aol.com
Subject: Tailwind-List: Stringers

The plans, and Jim C, both call out for 1/2 X .035 aluminum stringers.
I picked up some smaller dia tube - 6 pieces 10' long, at the Yard Store here 
in Wichita for about $10.  It measures between 5/16 and 3/8 X .035 (might be 
metric).  Would this be all right for the stringers ?

Chuck G.

________________________________  Message 2  _____________________________________


Time: 03:49:15 PM PST US
From: "Jim Clement" <jclement000@centurytel.net>
Subject: Re: Tailwind-List: Stringers

--> Tailwind-List message posted by: "Jim Clement" <jclement000@centurytel.net>

Should work, I used 3/8" X .028 and it worked ok. Anchor it down a little 
more than using 1/2".  Jim C

----- Original Message ----- 
From: <Rcaprd@aol.com>
Sent: Thursday, October 19, 2006 3:06 AM
Subject: Tailwind-List: Stringers


> The plans, and Jim C, both call out for 1/2 X .035 aluminum stringers.
> I picked up some smaller dia tube - 6 pieces 10' long, at the Yard Store 
> here
> in Wichita for about $10.  It measures between 5/16 and 3/8 X .035 (might 
> be
> metric).  Would this be all right for the stringers ?
>
> Chuck G.
>