Today's Message Index:
----------------------
1. 02:02 PM - tailwheel overhaul (Robert Ardis)
2. 02:43 PM - Re: tailwheel overhaul (Thomas Barnes)
3. 02:50 PM - Static RPM test of cross over exhaust vs Y pipe exhaust (Thomas Barnes)
4. 05:08 PM - Re: tailwheel overhaul ()
5. 05:22 PM - Re: tailwheel overhaul (Ruhnke, Mike)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | tailwheel overhaul |
Rebuilding 600 x 2 Scott tailwheel and having trouble keeping the tire
from
turning in the hub. ANY SUGGESTIONS WOULD BE APPRECIATED.
Robert Ardis
_________________________________________________________________
Visit MSN Holiday Challenge for your chance to win up to $50,000 in Holiday
cash from MSN today!
http://www.msnholidaychallenge.com/index.aspx?ocid=tagline&locale=en-us
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: tailwheel overhaul |
I've heard of people putting sheet metal screws through the aluminum hub
into the solid rubber tire... and others have wrapped strips of old inner
tube around the aluminum hub...
Thomas
"Robert Ardis" <ardis_rb@hotmail.com>
Sent by: owner-tailwind-list-server@matronics.com
12/06/2006 05:01 PM
Please respond to
tailwind-list@matronics.com
To
tailwind-list@matronics.com
cc
Subject
Tailwind-List: tailwheel overhaul
Rebuilding 600 x 2 Scott tailwheel and having trouble keeping the
tire
from
turning in the hub. ANY SUGGESTIONS WOULD BE APPRECIATED.
Robert Ardis
_________________________________________________________________
Visit MSN Holiday Challenge for your chance to win up to $50,000 in
Holiday
cash from MSN today!
http://www.msnholidaychallenge.com/index.aspx?ocid=tagline&locale=en-us
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Static RPM test of cross over exhaust vs Y pipe exhaust |
Just finished welding up my homemade cross over exhaust and gave it the
smoke test in some static WOT runups. Here's some info....(Lyc O320 160
HP, Sterba 69X75 prop)
run # 1 with new X-over exhaust 2270 rpm ( readings are as best as I could
tell on the steam gage tach)
run # 2 with the Y pipe exhaust 2220 rpm
run # 3 with new X-over exhaust 2280 rpm
so it looks like about a 50 to 60 rpm gain on the avg on a static runup.
Now on to making some heat shields for the alternator, starter, etc where
those pipes come close to...
Thomas
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: tailwheel overhaul |
I actually had good luck with duct tape wrapped arround the hub. Started
out as a temporary repair, but lasted years.
Bob Matteson
----- Original Message -----
From: "Robert Ardis" <ardis_rb@hotmail.com>
Sent: Wednesday, December 06, 2006 5:01 PM
Subject: Tailwind-List: tailwheel overhaul
>
>
> Rebuilding 600 x 2 Scott tailwheel and having trouble keeping the tire
> from
> turning in the hub. ANY SUGGESTIONS WOULD BE APPRECIATED.
>
> Robert Ardis
>
> _________________________________________________________________
> Visit MSN Holiday Challenge for your chance to win up to $50,000 in
> Holiday cash from MSN today!
> http://www.msnholidaychallenge.com/index.aspx?ocid=tagline&locale=en-us
>
>
>
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | tailwheel overhaul |
Another one of the million and one uses for Duck Tape!
Do not archive
-----Original Message-----
From: owner-tailwind-list-server@matronics.com
[mailto:owner-tailwind-list-server@matronics.com] On Behalf Of
rlmatteson@bellsouth.net
Sent: Thursday, December 07, 2006 9:08 AM
Subject: Re: Tailwind-List: tailwheel overhaul
I actually had good luck with duct tape wrapped arround the hub.
Started
out as a temporary repair, but lasted years.
Bob Matteson
----- Original Message -----
From: "Robert Ardis" <ardis_rb@hotmail.com>
Sent: Wednesday, December 06, 2006 5:01 PM
Subject: Tailwind-List: tailwheel overhaul
<ardis_rb@hotmail.com>
>
>
> Rebuilding 600 x 2 Scott tailwheel and having trouble keeping the
tire
> from
> turning in the hub. ANY SUGGESTIONS WOULD BE APPRECIATED.
>
> Robert Ardis
>
> _________________________________________________________________
> Visit MSN Holiday Challenge for your chance to win up to $50,000 in
> Holiday cash from MSN today!
>
http://www.msnholidaychallenge.com/index.aspx?ocid=tagline&locale=en-us
>
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|