Tailwind-List Digest Thu 03/15/07

Tailwind-List Digest Archive

Thu 03/15/07

Total Messages Posted: 4



Today's Message Index:
----------------------
 
     1. 12:45 AM - Need to get Radiator Fabricated (Ruhnke, Mike)
     2. 06:45 AM - Re: Need to get Radiator Fabricated (John Downing)
     3. 08:32 AM - Re: Need to get Radiator Fabricated (Ruhnke, Mike)
     4. 09:41 AM - radiators (John Downing)
 
 
 

Message 1


					INDEX  Back to Main INDEX
					NEXT  Skip to NEXT Message
	LIST  Reply to LIST Regarding this Message
		SENDER  Reply to SENDER Regarding this Message

      
      
Time: 12:45:55 AM PST US
Subject: Need to get Radiator Fabricated
From: "Ruhnke, Mike" <mike.ruhnke@spectrumbrands.com>      
      Back to working on the Tailwind...
      
      
      I'm hanging an Olds on the nose of the bird.  It's the last part of this
      over ten year project and I need to get a radiator fabricated.  Can
      anyone point me in the direction of a good fabricator who will work with
      me?
      
      
      And then its cowling time.  I just want to put a simple cowl on this job
      and get it flying.  Any suggestions for construction from those of you
      who have crossed that bridge would be greatly appreciated.  Remember its
      an Olds that is going on it.  And Weaver...don't even start...
      
      
      Thanks
      
      Mike
      
      NW Illinois
      
      

Message 2


					INDEX  Back to Main INDEX
				PREVIOUS  Skip to PREVIOUS Message
					NEXT  Skip to NEXT Message
	LIST  Reply to LIST Regarding this Message
		SENDER  Reply to SENDER Regarding this Message

      
      
Time: 06:45:51 AM PST US
From: "John Downing" <downing.j@sbcglobal.net>
Subject: Re: Need to get Radiator Fabricated      
      Mike, Ed Klepeis at techwelding@comcast.net builds custom radiators and 
      coolers, he is on the flyrotary engine site.  Farmer John
        ----- Original Message ----- 
        From: Ruhnke, Mike 
        To: tailwind-list@matronics.com 
        Sent: Thursday, March 15, 2007 2:45 AM
        Subject: Tailwind-List: Need to get Radiator Fabricated
      
      
        Back to working on the Tailwind.
      
      
        I'm hanging an Olds on the nose of the bird.  It's the last part of 
      this over ten year project and I need to get a radiator fabricated.  Can 
      anyone point me in the direction of a good fabricator who will work with 
      me?
      
      
        And then its cowling time.  I just want to put a simple cowl on this 
      job and get it flying.  Any suggestions for construction from those of 
      you who have crossed that bridge would be greatly appreciated.  Remember 
      its an Olds that is going on it.  And Weaver.don't even start.
      
      
        Thanks
      
        Mike
      
        NW Illinois
      
      

Message 3


					INDEX  Back to Main INDEX
				PREVIOUS  Skip to PREVIOUS Message
					NEXT  Skip to NEXT Message
	LIST  Reply to LIST Regarding this Message
		SENDER  Reply to SENDER Regarding this Message

      
      
Time: 08:32:20 AM PST US
Subject: Need to get Radiator Fabricated
From: "Ruhnke, Mike" <mike.ruhnke@spectrumbrands.com>      
      Thanks Farmer John, I will drop him a line.
      
      Mike
      
      
      -----Original Message-----
      From: owner-tailwind-list-server@matronics.com on behalf of John Downing
      Sent: Thu 3/15/2007 8:46 AM
      Subject: Re: Tailwind-List: Need to get Radiator Fabricated
      
      Mike, Ed Klepeis at techwelding@comcast.net builds custom radiators and 
      coolers, he is on the flyrotary engine site.  Farmer John
        ----- Original Message ----- 
        From: Ruhnke, Mike 
        To: tailwind-list@matronics.com 
        Sent: Thursday, March 15, 2007 2:45 AM
        Subject: Tailwind-List: Need to get Radiator Fabricated
      
      
        Back to working on the Tailwind.
      
      
        I'm hanging an Olds on the nose of the bird.  It's the last part of 
      this over ten year project and I need to get a radiator fabricated.  Can 
      anyone point me in the direction of a good fabricator who will work with 
      me?
      
      
        And then its cowling time.  I just want to put a simple cowl on this 
      job and get it flying.  Any suggestions for construction from those of 
      you who have crossed that bridge would be greatly appreciated.  Remember 
      its an Olds that is going on it.  And Weaver.don't even start.
      
      
        Thanks
      
        Mike
      
        NW Illinois
      
      

Message 4


					INDEX  Back to Main INDEX
				PREVIOUS  Skip to PREVIOUS Message
					NEXT  Skip to NEXT Message
	LIST  Reply to LIST Regarding this Message
		SENDER  Reply to SENDER Regarding this Message

      
      
Time: 09:41:30 AM PST US
From: "John Downing" <downing.j@sbcglobal.net>
Subject: radiators      
      Mike, another one is www.crracing.com    Farmer John
      








Other Matronics Email List Services




Post A New Message    tailwind-list@matronics.com
UN/SUBSCRIBE    http://www.matronics.com/subscription
List FAQ    http://www.matronics.com/FAQ/Tailwind-List.htm
Web Forum Interface To Lists    http://forums.matronics.com
Matronics List Wiki    http://wiki.matronics.com
7-Day List Browse    http://www.matronics.com/browse/tailwind-list
Browse Tailwind-List Digests    http://www.matronics.com/digest/tailwind-list
Browse Other Lists    http://www.matronics.com/browse
Live Online Chat!    http://www.matronics.com/chat
Archive Downloading    http://www.matronics.com/archives
Photo Share    http://www.matronics.com/photoshare
Other Email Lists    http://www.matronics.com/emaillists
Contributions    http://www.matronics.com/contribution









These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.




-- Please support this service by making your Contribution today! --