Today's Message Index:
----------------------
1. 07:24 PM - Re: ACS Gascolator rubber seal. (Eric Schlanser)
2. 07:28 PM - Re: ACS Gascolator rubber seal. (Eric Schlanser)
3. 08:04 PM - Re: ACS Gascolator rubber seal. (Red Hamilton)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: ACS Gascolator rubber seal. |
I had a similar experience over 20 years ago when fuel was cheaper. I had gotten
out of the habit of turning the fuel supply off before heading home from the
hangar. Thanks for reminding me. Eric
Red Hamilton <redswing@mcn.org> wrote: They are also the same as for flathead
Ford fuel pump sediment bowls, and are usually rubberized cork and last
longer than plain cork and don't squirm as much as the rubber.
Red
----- Original Message -----
From: John Downing
To: tailwind-list@matronics.com
Sent: Tuesday, May 15, 2007 1:50 PM
Subject: Re: Tailwind-List: ACS Gascolator rubber seal.
Those cork gaskets are available at Tractor or Farm Supply Stores. Farmer
John
----- Original Message -----
From: "Lovelace, Malcolm" <Malcolm.Lovelace@coopertools.com>
Sent: Tuesday, May 15, 2007 10:53 AM
Subject: RE: Tailwind-List: ACS Gascolator rubber seal.
<Malcolm.Lovelace@CooperTools.com>
>
> I use a cork gasket in mine. I had the same problem.
>
> Malcolm
>
> > -----Original Message-----
> > From: owner-tailwind-list-server@matronics.com
[SMTP:owner-tailwind-list-server@matronics.com]
> > Sent: Tuesday, May 15, 2007 9:39 AM
> > To: tailwind-list@matronics.com
> > Subject: Re: Tailwind-List: ACS Gascolator rubber seal.
> >
> > At today's fuel prices that's probably well over $100 spilled on the
floor. Good thing you found the leak before flight, however.
> >
> > Dave M
> >
> >
> > -------------- Original message from "Graham Mitchell"
<gmitchell@coastcomposites.com>: --------------
> >
> >
> > A word of warning about the AC Spruce homebuilder gascolator. I just
returned from the Hangar to find a huge stain under the cowling and
tailwheel. I had dismanteled and checked the filter screens in the
gascolator the week before, re assembled them CHECKED for leaks did not see
any and went home. My hangar buddy called me a couple days later to tell me
about a stain on the floor. Turns out I spilled 28 galls of fuel through the
rubber seal in the gascolator. It was a hot day here in So Cal when I
checked the screens and re assembled them, I have a feeling that's why it
did not leak there was just enough expansion in the rubber and aluminum to
make the seal. When it all cooled down and shrank it started to leak. when
I checked the rubber seal it has tiny crackes around the periphery also. So
this needs replacing 1 per year it seems.
> >
> > Just a word to the wise.
> >
> > Graham Mitchell
> >
> >
> > Graham Mitchell
> > Program Manager
> > Coast Composites Inc
> > Tel 949 455 0665 ext 128
> > Email gmitchell@coastcomposites.com
> >
> >
> >
> >
> > _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _
> >
> > This message and any attachments may contain confidential or privileged
> > information. The information is intended only for the use of the
individual
> > or entity named above. If you are not the intended recipient, you are
> > hereby notified that any disclosure, copying, distribution of, or the
taking
> > of any action in reliance on, the contents of this information is
strictly
> > prohibited. If you have r eceive d this message in error, please
immediately
> > notify the sender by reply email or call the IT Department at
949.455.0665 x125
> > and delete all copies of this message and any attachments. Thank you.
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> The preceding e-mail message (including any attachments) contains
information that may be confidential, or constitute non-public information.
> It is intended only for the designated recipient. If you are not the
named addressee, you should not disseminate, distribute or copy this e-mail.
> If you have received this e-mail by mistake, please notify the sender
immediately by replying to this message and delete this e-mail from your
system.
> Use, dissemination, distribution or reproduction of this message by
unintended recipients is not authorized and may be p; Features Subscriptions href="http://www.matronics.com/Navigator?Tailwind-List">http://www.matrp; available via href="http://forums.matronics.com">http://forums.matronics.com
---------------------------------
Pinpoint customers who are looking for what you sell.
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: ACS Gascolator rubber seal. |
What is a source for the rubberized cork ones? Thanks, Eric
Red Hamilton <redswing@mcn.org> wrote: They are also the same as for flathead
Ford fuel pump sediment bowls, and are usually rubberized cork and last
longer than plain cork and don't squirm as much as the rubber.
Red
----- Original Message -----
From: John Downing
To: tailwind-list@matronics.com
Sent: Tuesday, May 15, 2007 1:50 PM
Subject: Re: Tailwind-List: ACS Gascolator rubber seal.
Those cork gaskets are available at Tractor or Farm Supply Stores. Farmer
John
----- Original Message -----
From: "Lovelace, Malcolm" <Malcolm.Lovelace@coopertools.com>
Sent: Tuesday, May 15, 2007 10:53 AM
Subject: RE: Tailwind-List: ACS Gascolator rubber seal.
<Malcolm.Lovelace@CooperTools.com>
>
> I use a cork gasket in mine. I had the same problem.
>
> Malcolm
>
> > -----Original Message-----
> > From: owner-tailwind-list-server@matronics.com
[SMTP:owner-tailwind-list-server@matronics.com]
> > Sent: Tuesday, May 15, 2007 9:39 AM
> > To: tailwind-list@matronics.com
> > Subject: Re: Tailwind-List: ACS Gascolator rubber seal.
> >
> > At today's fuel prices that's probably well over $100 spilled on the
floor. Good thing you found the leak before flight, however.
> >
> > Dave M
> >
> >
> > -------------- Original message from "Graham Mitchell"
<gmitchell@coastcomposites.com>: --------------
> >
> >
> > A word of warning about the AC Spruce homebuilder gascolator. I just
returned from the Hangar to find a huge stain under the cowling and
tailwheel. I had dismanteled and checked the filter screens in the
gascolator the week before, re assembled them CHECKED for leaks did not see
any and went home. My hangar buddy called me a couple days later to tell me
about a stain on the floor. Turns out I spilled 28 galls of fuel through the
rubber seal in the gascolator. It was a hot day here in So Cal when I
checked the screens and re assembled them, I have a feeling that's why it
did not leak there was just enough expansion in the rubber and aluminum to
make the seal. When it all cooled down and shrank it started to leak. when
I checked the rubber seal it has tiny crackes around the periphery also. So
this needs replacing 1 per year it seems.
> >
> > Just a word to the wise.
> >
> > Graham Mitchell
> >
> >
> > Graham Mitchell
> > Program Manager
> > Coast Composites Inc
> > Tel 949 455 0665 ext 128
> > Email gmitchell@coastcomposites.com
> >
> >
> >
> >
> > _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _
> >
> > This message and any attachments may contain confidential or privileged
> > information. The information is intended only for the use of the
individual
> > or entity named above. If you are not the intended recipient, you are
> > hereby notified that any disclosure, copying, distribution of, or the
taking
> > of any action in reliance on, the contents of this information is
strictly
> > prohibited. If you have r eceive d this message in error, please
immediately
> > notify the sender by reply email or call the IT Department at
949.455.0665 x125
> > and delete all copies of this message and any attachments. Thank you.
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> The preceding e-mail message (including any attachments) contains
information that may be confidential, or constitute non-public information.
> It is intended only for the designated recipient. If you are not the
named addressee, you should not disseminate, distribute or copy this e-mail.
> If you have received this e-mail by mistake, please notify the sender
immediately by replying to this message and delete this e-mail from your
system.
> Use, dissemination, distribution or reproduction of this message by
unintended recipients is not authorized and may be p; Features Subscriptions href="http://www.matronics.com/Navigator?Tailwind-List">http://www.matrp; available via href="http://forums.matronics.com">http://forums.matronics.com
---------------------------------
8:00? 8:25? 8:40? Find a flick in no time
with theYahoo! Search movie showtime shortcut.
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: ACS Gascolator rubber seal. |
Red's Headers, the business that I used to own, has them.
I'll get a part number tomorrow and post it here.
Red
----- Original Message -----
From: Eric Schlanser
To: tailwind-list@matronics.com
Sent: Wednesday, May 16, 2007 7:27 PM
Subject: Re: Tailwind-List: ACS Gascolator rubber seal.
What is a source for the rubberized cork ones? Thanks, Eric
Red Hamilton <redswing@mcn.org> wrote:
They are also the same as for flathead Ford fuel pump sediment
bowls, and are usually rubberized cork and last longer than plain cork
and don't squirm as much as the rubber.
Red
----- Original Message -----
From: John Downing
To: tailwind-list@matronics.com
Sent: Tuesday, May 15, 2007 1:50 PM
Subject: Re: Tailwind-List: ACS Gascolator rubber seal.
<downing.j@sbcglobal.net>
Those cork gaskets are available at Tractor or Farm Supply Stores.
Farmer
John
----- Original Message -----
From: "Lovelace, Malcolm" <Malcolm.Lovelace@coopertools.com>
To: <tailwind-list@matronics.com>
Sent: Tuesday, May 15, 2007 10:53 AM
Subject: RE: Tailwind-List: ACS Gascolator rubber seal.
<Malcolm.Lovelace@CooperTools.com>
>
> I use a cork gasket in mine. I had the same problem.
>
> Malcolm
>
> > -----Original Message-----
> > From: owner-tailwind-list-server@matronics.com
[SMTP:owner-tailwind-list-server@matronics.com]
> > Sent: Tuesday, May 15, 2007 9:39 AM
> > To: tailwind-list@matronics.com
> > Subject: Re: Tailwind-List: ACS Gascolator rubber seal.
> >
> > At today's fuel prices that's probably well over $100 spilled
on the
floor. Good thing you found the leak before flight, however.
> >
> > Dave M
> >
> >
> > -------------- Original message from "Graham Mitchell"
<gmitchell@coastcomposites.com>: --------------
> >
> >
> > A word of warning about the AC Spruce homebuilder gascolator.
I just
returned from the Hangar to find a huge stain under the cowling
and
tailwheel. I had dismanteled and checked the filter screens in the
gascolator the week before, re assembled them CHECKED for leaks
did not see
any and went home. My hangar buddy called me a couple days later
to tell me
about a stain on the floor. Turns out I spilled 28 galls of fuel
through the
rubber seal in the gascolator. It was a hot day here in So Cal
when I
checked the screens and re assembled them, I have a feeling that's
why it
did not leak there was just enough expansion in the rubber and
aluminum to
make the seal. When it all cooled down and shrank it started to
leak. when
I checked the rubber seal it has tiny crackes around the periphery
also. So
this needs replacing 1 per year it seems.
> >
> > Just a word to the wise.
> >
> > Graham Mitchell
> >
> >
> > Graham Mitchell
> > Program Manager
> > Coast Composites Inc
> > Tel 949 455 0665 ext 128
> > Email gmitchell@coastcomposites.com
> >
> >
> >
> >
> > _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _
_ _ _ _
> >
> > This message and any attachments may contain confidential or
privileged
> > information. The information is intended only for the use of
the
individual
> > or entity named above. If you are not the intended recipient,
you are
> > hereby notified that any disclosure, copying, distribution of,
or the
taking
> > of any action in reliance on, the contents of this information
is
strictly
> > prohibited. If you have r eceive d this message in error,
please
immediately
> > notify the sender by reply email or call the=C2 IT Department
at
949.455.0665 x125
> > and delete all copies of this message and any attachments.
Thank you.
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> The preceding e-mail message (including any attachments)
contains
information that may be confidential, or constitute non-public
information.
> It is intended only for the designated recipient. If you are
not the
named addressee, you should not disseminate, distribute or copy
this e-mail.
> If you have received this e-mail by mistake, please notify the
sender
immediately by replying to this
-------------------------------------------------------------------------
-
8:00? 8:25? 8:40? Find a flick in no time
with theYahoo! Search movie showtime shortcut.
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|