Today's Message Index:
----------------------
1. 05:01 PM - Fw: prop (Gordon Parker)
2. 05:19 PM - Re: Fw: prop (owenld@earthlink.net)
3. 05:25 PM - FW: Re: Fw: prop (owenld@earthlink.net)
4. 05:36 PM - Re: Re: Fw: prop (Gordon Parker)
5. 05:39 PM - Re: Fw: prop (Jim Clement)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Jim C. My Felix prop-- almost every year at inspection time -Prop needs
refinishing. account of
some sand and small rocks here. Most of the pits are on the back
side. So Would sanding off to
bare wood and putting 1 layer of 1.4 oz. fiberglass and West System
just on the back side help?-Gordon
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Gordon
This stuff won't keep the stone pits away but it works nicely for regular prop
finish.
I got mine at the hardware store.
Lou Owen
----- Original Message -----
From: Gordon Parker
Sent: 9/10/2008 8:04:15 PM
Subject: Tailwind-List: Fw: prop
Jim C. My Felix prop-- almost every year at inspection time -Prop needs refinishing.
account of
some sand and small rocks here. Most of the pits are on the back side. So
Would sanding off to
bare wood and putting 1 layer of 1.4 oz. fiberglass and West System just on the
back side help?-Gordon
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
http://eti-usa.com/consum/envtex/envlite.htm
Address for Pour On.
Lou
----- Original Message -----
From: owenld@earthlink.net
Sent: 9/10/2008 8:18:57 PM
Subject: RE: Tailwind-List: Fw: prop
Gordon
This stuff won't keep the stone pits away but it works nicely for regular prop
finish.
I got mine at the hardware store.
Lou Owen
----- Original Message -----
From: Gordon Parker
Sent: 9/10/2008 8:04:15 PM
Subject: Tailwind-List: Fw: prop
Jim C. My Felix prop-- almost every year at inspection time -Prop needs refinishing.
account of
some sand and small rocks here. Most of the pits are on the back side. So
Would sanding off to
bare wood and putting 1 layer of 1.4 oz. fiberglass and West System just on the
back side help?-Gordon
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Thanks Lou----Looks good. I have used J-Weld on the leading edge over
the epoxy. Just on the front 3/16 or so. Sanded and then put it on and
wet sanded and it
is holding up good. Gordon
-----
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Gordon
Putting fiberglass on won't help much, it will still chip. Sand it down
some, fill the stone chips and coat with a couple of coats of West. Jim
----- Original Message -----
From: "Gordon Parker" <gptailwind@msn.com>
Sent: Wednesday, September 10, 2008 6:59 PM
Subject: Tailwind-List: Fw: prop
Jim C. My Felix prop-- almost every year at inspection time -Prop needs
refinishing. account of
some sand and small rocks here. Most of the pits are on the back side.
So Would sanding off to
bare wood and putting 1 layer of 1.4 oz. fiberglass and West System just on
the back side help?-Gordon
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|