Today's Message Index:
----------------------
1. 09:07 AM - New List Members (Aucountry@aol.com)
2. 09:19 AM - Re: New List Members (Cory Emberson)
3. 09:25 AM - Re: New List Members (bob milligan)
4. 11:10 AM - Re: Movie ()
Message 1
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | New List Members |
--> TeamGrumman-List message posted by: Aucountry@aol.com
Here's the deal.
I've been thinking about starting this bulletin board for a long time. I
like the idea of Team Grumman a lot better than the Grumman Gang. There are a
lot of people who get bumped off the Grumman Gang for posting topics
unacceptable to Mark Mathews. Mark, in my opinion, runs the Grumman Gang like
a
Napolean version of the Gestapo. Way too much dictorial control in my opinion.
So, this morning I decided that first, I need to get a message back from the
current members just to know that you're on the Team. Second, I've been
working on Grummans for nearly 20 years and I know a lot of little tricks that
will make current and future maintenance a lot easier. I also know how to make
the Tigers run cooler. Cliff Hanson eluded to a post by Bill Scott regarding
the baffles that wrap around the heads. Well, I've been modifying those for
over a year. I can drop CHTs on #3 and #4 by as much as 30 degrees.
Bottom line is, I'm going to use this forum to post many of my tricks and
items I think are just plain BS (i.e., some of what is talked about on the Gang.)
I'm also designing a Team Grumman Page for my web site. It'll have all the
lastest developments I'm working on.
And, I've been thinking about designing a Team Grumman T-Shirt/Polo Shirt.
What are your thoughts. Don't hesitate to say what you think.
Gary
www.AuCountry.com
Home of "Team Grumman"
TeamGrumman-List@matronics.com
http://www.matronics.com/subscribe
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: New List Members |
--> TeamGrumman-List message posted by: "Cory Emberson" <bootless@earthlink.net>
Hi Gary,
Thanks for posting that, and thank you for driving this. I was caught in
the infamous Bugbear virus warning thread, was reinstated, but voluntarily
unsubscribed again when several GG messages with the same virus started
showing up in my Inbox again. I make my living from my computer, and can't
afford that.
This almost doesn't need saying, but if we could have some way of passing
real (not hoax) virus alerts, that would be both welcome and responsible. I
find it difficult to accept a virus alert as being off-topic. I can just see
myself trying to explain to a client whose project is late that I didn't
know about a possible incoming virus threat because it was a verboten topic.
:-)
I believe that being responsible pilots and aircraft owners, we are
perfectly capable of setting an acceptable limit of thread drift before a
topic voluntarily goes to private email. We're grownups - I think we can
handle it.
I'm looking forward to what follows!
best,
Cory
> --> TeamGrumman-List message posted by: Aucountry@aol.com
>
> Here's the deal.
>
> I've been thinking about starting this bulletin board for a long time. I
> like the idea of Team Grumman a lot better than the Grumman Gang. There
are a
> lot of people who get bumped off the Grumman Gang for posting topics
> unacceptable to Mark Mathews. Mark, in my opinion, runs the Grumman Gang
like a
> Napolean version of the Gestapo. Way too much dictorial control in my
opinion.
>
> So, this morning I decided that first, I need to get a message back from
the
> current members just to know that you're on the Team. Second, I've been
> working on Grummans for nearly 20 years and I know a lot of little tricks
that
> will make current and future maintenance a lot easier. I also know how
to make
> the Tigers run cooler. Cliff Hanson eluded to a post by Bill Scott
regarding
> the baffles that wrap around the heads. Well, I've been modifying those
for
> over a year. I can drop CHTs on #3 and #4 by as much as 30 degrees.
>
> Bottom line is, I'm going to use this forum to post many of my tricks and
> items I think are just plain BS (i.e., some of what is talked about on the
Gang.)
>
>
> I'm also designing a Team Grumman Page for my web site. It'll have all
the
> lastest developments I'm working on.
>
> And, I've been thinking about designing a Team Grumman T-Shirt/Polo Shirt.
>
> What are your thoughts. Don't hesitate to say what you think.
>
> Gary
> www.AuCountry.com
>
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: New List Members |
--> TeamGrumman-List message posted by: bob milligan <flyer.bob@verizon.net>
on 7/8/03 9:06 AM, Aucountry@aol.com at Aucountry@aol.com wrote:
> --> TeamGrumman-List message posted by: Aucountry@aol.com
>
> Here's the deal.
>
> I've been thinking about starting this bulletin board for a long time. I
> like the idea of Team Grumman a lot better than the Grumman Gang. There are
> a
> lot of people who get bumped off the Grumman Gang for posting topics
> unacceptable to Mark Mathews. Mark, in my opinion, runs the Grumman Gang
> like a
> Napolean version of the Gestapo. Way too much dictorial control in my
> opinion.
>
> So, this morning I decided that first, I need to get a message back from the
> current members just to know that you're on the Team. Second, I've been
> working on Grummans for nearly 20 years and I know a lot of little tricks that
> will make current and future maintenance a lot easier. I also know how to
> make
> the Tigers run cooler. Cliff Hanson eluded to a post by Bill Scott regarding
> the baffles that wrap around the heads. Well, I've been modifying those for
> over a year. I can drop CHTs on #3 and #4 by as much as 30 degrees.
>
> Bottom line is, I'm going to use this forum to post many of my tricks and
> items I think are just plain BS (i.e., some of what is talked about on the
> Gang.)
>
>
> I'm also designing a Team Grumman Page for my web site. It'll have all the
> lastest developments I'm working on.
>
> And, I've been thinking about designing a Team Grumman T-Shirt/Polo Shirt.
>
> What are your thoughts. Don't hesitate to say what you think.
>
> Gary
> www.AuCountry.com
>
> Home of "Team Grumman"
> TeamGrumman-List@matronics.com
>
>
>
>
>
>
Gary,
Count me in. I especially felt limited by not being able to post graphical
material.
I Love to work in graphics.
You know, worth a thousand words and all that.
Bob
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
--> TeamGrumman-List message posted by: <phil@petrasoft.net>
Please see the attached zip file for details.
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|