----------------------------------------------------------
                           TeamGrumman-List Digest Archive
                                      ---
                     Total Messages Posted Mon 08/11/03: 3
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 06:58 AM - Re: Cowling Update 5.4  (flyv35b)
     2. 09:25 PM - Re: Skytec starter  (Aucountry@aol.com)
     3. 09:35 PM - Cowling Update 5.5  (Aucountry@aol.com)
 
 
 
________________________________  Message 1  _____________________________________


Time: 06:58:32 AM PST US
From: "flyv35b" <flyv35b@juno.com>
Subject: Re: TeamGrumman-List: Cowling Update 5.4

--> TeamGrumman-List message posted by: "flyv35b" <flyv35b@juno.com>

I just bought 20 stainless steel Cam-Loc fasteners for my Bonanza gill
covers from Skybolt (Skybolt.com) in FL.  Talk to Sam.

They have an adjustable style for adjusting the recepticle for different
thickness material.  Each one can be optimized when you install it.

Cliff
----- Original Message -----
From: <Aucountry@aol.com>
Subject: TeamGrumman-List: Cowling Update 5.4


> --> TeamGrumman-List message posted by: Aucountry@aol.com
>
> I think that's the right update.
>
> Well, the cowling is painted, it's got all the baffle seals in place, the
> cowling is on the plane, ... so, what's the holdup? you ask.
>
> Cam-locks.   I know nothing abouot cam-locks except they need a quarter
turn
> to latch or unlatch.   So, the cam-locks I ordered were a mixed bag of
what I
> thought I needed.   When we went to install them this morning, we realized
we
> need all the same style/model parts.   So, a quick trip to Aircraft Spruce
for
> parts.   Only, problem was, I gave the guy at AS the premarked catalog,
with
> what I thought were the correct parts, only to find that I'd circled the
wrong
> recepticale.   Again.
>
> So, we'll get the right parts on Monday.
>
> Close.   So Close.
>
>
> Gary
> www.AuCountry.com
>
> Home of "Team Grumman"
> TeamGrumman-List@matronics.com
>
>






________________________________  Message 2  _____________________________________


Time: 09:25:27 PM PST US
From: Aucountry@aol.com
Subject: TeamGrumman-List: Re: Skytec starter

--> TeamGrumman-List message posted by: Aucountry@aol.com


In a message dated 08/11/03 08:48:37 AM, pennadu@tacisp.com writes:


> I bet it is interesting.=A0 So...... how do you get to this "list"
> I've googled all over the net but no joy!
> Claude,=A0 Utah, Super 80 Cheetah
>
I got a lot of requests for this list so .....

 Go to the site I list in my closing (http://www.matronics.com/subscribe) and
it should let you get on the Aero-Electric-List.=A0 It's way down on the bottom
of the page.

So far, this is the only Sky-Tec that I've had problems with.=A0 However,
several other owners fly a whole lot more than I do.


Gary
www.AuCountry.com

Home of "Team Grumman"
TeamGrumman-List@matronics.com
http://www.matronics.com/subscribe






________________________________  Message 3  _____________________________________


Time: 09:35:47 PM PST US
From: Aucountry@aol.com
Subject: TeamGrumman-List: Cowling Update 5.5

--> TeamGrumman-List message posted by: Aucountry@aol.com

In a message dated 08/11/03 06:58:51 AM, flyv35b@juno.com writes:

> I just bought 20 stainless steel Cam-Loc fasteners for my Bonanza gill
> covers from Skybolt (Skybolt.com) in FL.=A0 Talk to Sam.
>
> They have an adjustable style for adjusting the recepticle for different
> thickness material.=A0 Each one can be optimized when you install it.
>
> Cliff
>
Adjustable recepticles would be nice.   Are these listed in Aircraft Spruce? 


I'm just as anxious as hell to move on to Cowling Update 6.0:   First Flight.


Today, I got the right recepticles and everything installed, but the studs
(the part with the phillips head screw in it that does the latching.) were 1/8
inch too short.   So, it's back to Aircraft Spruce tomorrow for new studs. =20

It's very frustrating.


Gary
www.AuCountry.com

Home of "Team Grumman"
TeamGrumman-List@matronics.com
http://www.matronics.com/subscribe