----------------------------------------------------------
                           TeamGrumman-List Digest Archive
                                      ---
                     Total Messages Posted Tue 09/09/03: 5
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 09:29 AM - Surplus parts, gone  (ThomasTholmes512@aol.com)
     2. 07:52 PM - Steps for fix of leak (TG)?  (FLYaDIVE@aol.com)
     3. 10:09 PM - Re: Steps for fix of leak (TG)?  (Aucountry@aol.com)
     4. 10:09 PM - Re: Steps for fix of leak (TG)?  (Aucountry@aol.com)
     5. 10:10 PM - Re: Steps for fix of leak (TG)?  (Aucountry@aol.com)
 
 
 
________________________________  Message 1  _____________________________________


Time: 09:29:29 AM PST US
From: ThomasTholmes512@aol.com
Subject: TeamGrumman-List: Surplus parts, gone

--> TeamGrumman-List message posted by: ThomasTholmes512@aol.com






________________________________  Message 2  _____________________________________


Time: 07:52:06 PM PST US
From: FLYaDIVE@aol.com
Subject: TeamGrumman-List: Steps for fix of leak (TG)?

--> TeamGrumman-List message posted by: FLYaDIVE@aol.com

Hi Flock:

Well, I have collected all (I HOPE) the material and equipment for fixing the 
slow leak in my fuel tank.  I isolated it to the inboard rib, at the bottom, 
in the first 12" from the leading edge.  That location should be an easy place

to reach.

I'm looking for helpful hints and trick on how to SUCCESSFULLY do this job on 
the first try.
Yes, I will be receiving the Tech Sheet for the bonding material, I'm looking 
for the REAL WORLD experience that exists in the AYA & TG.
Here is a list of items collected:
MEK - For THINNING & Cleaning
ACETONE - For CLEANING
DIAPERS - For Cleaning
Popsicle Sticks - For mixing & spreading
Paint Brush, Short Bristle - for spreading
Surgical Gloves - So I won't need a cleaning
Old Long Sleeve Shirt - So I won't need a cleaning
Metal Cups - For Mixing 
SCOTCH BRITE - For scuffing and cleaning the area.
All NEW Steel Screws - For the inspection hatches
Well, that is all I can think of do you have any additions or corrections?

Thanks All,
Barry






________________________________  Message 3  _____________________________________


Time: 10:09:28 PM PST US
From: Aucountry@aol.com
Subject: Re: TeamGrumman-List: Steps for fix of leak (TG)?

--> TeamGrumman-List message posted by: Aucountry@aol.com


In a message dated 09/09/03 07:53:31 PM, FLYaDIVE@aol.com writes:


> I'm looking for helpful hints and trick on how to SUCCESSFULLY do this job 
> on
> the first try.
> 

call me.






________________________________  Message 4  _____________________________________


Time: 10:09:35 PM PST US
From: Aucountry@aol.com
Subject: Re: TeamGrumman-List: Steps for fix of leak (TG)?

--> TeamGrumman-List message posted by: Aucountry@aol.com


In a message dated 09/09/03 07:53:31 PM, FLYaDIVE@aol.com writes:


> I'm looking for helpful hints and trick on how to SUCCESSFULLY do this job 
> on
> the first try.
> 

call me at 805-358-7293.






________________________________  Message 5  _____________________________________


Time: 10:10:39 PM PST US
From: Aucountry@aol.com
Subject: Re: TeamGrumman-List: Steps for fix of leak (TG)?

--> TeamGrumman-List message posted by: Aucountry@aol.com


In a message dated 09/09/03 07:53:31 PM, FLYaDIVE@aol.com writes:


> I'm looking for helpful hints and trick on how to SUCCESSFULLY do this job 
> on
> the first try.
> 

or catch me on-line