---------------------------------------------------------- TeamGrumman-List Digest Archive --- Total Messages Posted Sat 09/20/03: 1 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 09:52 PM - Throttle Cable Plate on Firewall (Steven Jackson) ________________________________ Message 1 _____________________________________ Time: 09:52:53 PM PST US From: "Steven Jackson" Subject: TeamGrumman-List: Throttle Cable Plate on Firewall --> TeamGrumman-List message posted by: "Steven Jackson" TG, I'm still working on prep for painting the firewall. I'm curious about the plate that is riveted to the firewall that supports the throttle cable (I'm not sure of the name--couldn't find it in the parts manual) and the rubber seal that is underneath. It appears that the seal material is in between the firewall and the plate, and is a single piece that includes the rubber portion that the cable goes through. My rubber seal is reamed out, so there's not a solid seal where the cable goes through. I'm assuming that when I pop the rivets and plate off, I can remove the seal as well. 2 questions--(1) has anyone done this before, and (2) what kind of material is it made of. Once again, I have this thought after Fletchair is closed. Steven Jackson N1434R L22 Yucca Valley, CA