TeamGrumman-List Digest Archive

Thu 12/11/03


Total Messages Posted: 2



Today's Message Index:
----------------------
 
     1. 12:17 AM - Re: TeamGrumman-List Digest: 3 Msgs - 12/10/03 (Tiger67B)
     2. 11:06 PM - Re: Stand back, housewife stepping in (Aucountry@aol.com)
 
 
 


Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 12:17:29 AM PST US
    From: Tiger67B <jnpsavage@cox.net>
    Subject: Re: TeamGrumman-List Digest: 3 Msgs - 12/10/03
    --> TeamGrumman-List message posted by: Tiger67B <jnpsavage@cox.net> I have a label/decal maker thingus, but the stickers it makes look just like "stickers" .... not really good for a cherry dash panel. Even the clear ones "show". What you really need is a contrasting color "rub-on" kit of letters and numbers. YOU MAY be able to get from an office supply and are relatively cheap. They are a pain to put on, as each letter has to be "rubbed on", but will look best. Once the wording is on, you have to "clear coat" or you will have letters that wear off easily. You might ask an Avionics repair station for suggestions/prices. They have to "do it right". and your new dash should be done "right". Just one man's opine. Jan Time: 11:56:06 AM PST US From: Aucountry@aol.com Subject: TeamGrumman-List: Re: Panel --> TeamGrumman-List message posted by: Aucountry@aol.com In a message dated 12/09/03 09:43:46 PM, ardri@comcast.net writes: >> I got the panel back from the powdercoat shop today. They did a nice >> job. I'm putting the placards on it now. The only thing is, the decal >> sets I have are too old to have GPS stickers. Do you use a label printer >> of some kind for this, or is there someplace to get more up-to-date >> decals (ideally the foil kind, since they would match the Grumman >> placards from FletchAir)? >> Check around. There are companies, even auto body decal shops, that make decals. Look on the internet. Also, there are label makers you can get from places like Staples, that make labels. There is even software you can get to print labels on your computer. Gary Any other ideas from Team Grumman?


    Message 2


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 11:06:45 PM PST US
    From: Aucountry@aol.com
    Subject: Re: Stand back, housewife stepping in
    --> TeamGrumman-List message posted by: Aucountry@aol.com In a message dated 12/11/03 03:37:46 PM, cgrismore@mindspring.com writes: > If you buy and prewash HandiWipes, you will find they're ultra-soft and > without lint.=A0 They can be re-washed umpty times. > > If you lose one, no big deal. > > No special trip necessary; they're at your supermarket. > > Near the PLEDGE. > In a message dated 12/11/03 03:37:46 PM, cgrismore@mindspring.com writes: > If you buy and prewash HandiWipes, you will find they're ultra-soft and > without lint.=A0 They can be re-washed umpty times. > > If you lose one, no big deal. > > No special trip necessary; they're at your supermarket. > > Near the PLEDGE. > Don't use anything on the plexiglass except 100% cotton. Get a box of painters rags. They are 100% cotton, have never been washed and there is NO dirt trapped in the fabric. Dirt you can't see. Dirt you can't feel. Use only fresh rags. That is, unless your windows look like=20they should be replaced anyway. In that case, use the blue shop paper towels, they'll work just fine. Meguires makes good plastic polish. Blue Coral makes some stuff I like better. The Cee Bailey stuff is OK. Plexus is not bad. Prist Plastic cleaner is not bad either. Either Plexus or Prist work fine for an occasional touch up. If you need to get a lot of bugs off (or lotsa dirt), use your HAND and fresh water over windshield and wipe gently to remove the excess stuff off. Then, with NEW 100% cotton rags, use WASH/WAX All to clean off the bugs (works great on the leading edge too.). Then, with NEW 100% cotton rags, polish with the Blue Coral stuff. Again, if your windows look like crap anyway, it really doesn't matter what you do. Gary www.AuCountry.com Home of "Team Grumman" TeamGrumman-List@matronics.com http://www.matronics.com/subscribe




    Other Matronics Email List Services

  • Post A New Message
  •   teamgrumman-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/TeamGrumman-List.htm
  • Full Archive Search Engine
  •   http://www.matronics.com/search
  • 7-Day List Browse
  •   http://www.matronics.com/browse/teamgrumman-list
  • Browse TeamGrumman-List Digests
  •   http://www.matronics.com/digest/teamgrumman-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contributions

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --