---------------------------------------------------------- TeamGrumman-List Digest Archive --- Total Messages Posted Sat 07/17/03: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 01:41 AM - Re: Prepended Subject string in Team Grumman (Aucountry@aol.com) 2. 05:01 PM - Spline Nut Wrenches (Steven Jackson) ________________________________ Message 1 _____________________________________ Time: 01:41:11 AM PST US From: Aucountry@aol.com Subject: Re: TeamGrumman-List: Prepended Subject string in Team Grumman --> TeamGrumman-List message posted by: Aucountry@aol.com In a message dated 07/16/03 09:33:27 PM, bootless@earthlink.net writes: > >>Something made me smile, though... I rarely abbreviate anything. << > > Except "Au" :-) > Well, on the periodic table, it's Au. The first company name I had was Gold Country Aviation. I got business licenses in all seven of the counties in the Gold Country area. About 2 years after I got the licenses, I got a call from the State of California, a department that registers Incorporations, and was told that a copmany was going to incorporate as Gold Country Aviation and be based out of Auburn, California. So, I side-stepped the problem. I had to throw away about 1000 business cards. But, what the hell, I like my new logo better. I found out from the experience that a business name really has no real meaning unless you incorporate. I told the lady who called me that I already had the name registered as a business and asked how someone could just take it. She told me I could call myself Microsoft if I wanted and no one could say anything. I just couldn't incorporate as Microsoft however, that name way already taken. Gary www.AuCountry.com Home of "Team Grumman" TeamGrumman-List@matronics.com http://www.matronics.com/subscribe ________________________________ Message 2 _____________________________________ Time: 05:01:08 PM PST US From: "Steven Jackson" "Grumman-Gang" Subject: TeamGrumman-List: Spline Nut Wrenches --> TeamGrumman-List message posted by: "Steven Jackson" OK, the cylinder stud repair is all lined up, except for one thing--the wrenches. Right now, the long pole in the tent is the spline-type cylinder base nut wrenches. The only set I can find is the set Joe at Corona Cylinder owns, and he doesn't rent out his tools. I've tried almost every online tool store I could find and ones that were recommended. If anyone knows of a set that could eventually make their way to Yucca Valley, CA, I'd really appreciate it. Maybe once everyone's done at the convention a set will turn up? Steven Jackson N1434R L22 Yucca Valley, CA